• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.466-466
• /
• 1998

도로 교통의 혼잡이 나날이 증가되고 있는 현실 상황에서 이를 해결하기 위한 새로운 도로의 무제한적 건설은 정보의 예산절약, 필요한 도로용지 확보의 어려움, 환경오염 문제 등으로 인해 현실적인 한계에 이르렀다. 따라서, 이러한 도로의 혼잡상황에 효과적으로 대처하기 위해서는 승용차를 이용하고자 하는 수요를 대량수송이 가능한 대중교통 이용수요로 전환시켜야 하며, 이를 위해서는 대중교통의 서비스수준 제고 및 운영 관리 체계 등의 개선이 필요하다. 이를 위한 전략적 및 운영적 측면에서의 대중교통계획은 미래 대중교통수요의 정확한 예측을 전제로 하여 수립되며, 이러한 수요의 예측은 필수적으로 현실을 보다 더 정확하게 묘사해 줄 수 있는 통행배정모형을 필요로 한다. 대중교통 통행배정은 규칙적인 배차시간과 정해진 노선을 운행하는 고정서비스 시스템으로 구성되어 있어서 한 링크 상에서도 여러 개의 운행노선을 고려해야 하기 때문에 승용차 통행배정과는 독립적으로 취급되어 왔으며, 이로 인해 그 동안 많은 연구가 선행되어 있지 않은 실정이다. 본 연구는 교통예측 프로그램 중의 하나인 EMME/2에서 사용하고 있는 대중교통수요 통행배정 모형인 최적전략모형(Optimal Strategy Model)의 단점을 보완하기 위한 것이다. 최적전략모형은 수요 배정시, 최적전략에 속하는 경로들에 대해 단순히 운행횟수에 비례하여 수요를 배정함으로 인해서, 예를 들면 운행횟수는 많지만 환승이 많은 경로에 수요를 많이 배정하는 것과 같은 비현실적인 결과가 발생하기도 한다. 본 연구는 이를 개선하기 위해서, 두 가지 대안을 제시했다. 먼저, 노선배정에 우선되는 최적경로 탐색시 환승노드에서의 환승에 대한 벌점을 그 노선의 운행회수에 줌으로써 환승이 많은 경로에 수요의 배정이 적게 되도록 하는 방법과 두 번째로 수요의 배정시 운행횟수가 아닌 목적지까지의 통행시간과 대시시간에 따른 확률적 배분을 통해 기존 모형의 단점을 보완하고자 했다.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.89-98
• /
• 2012

This study investigates the optimum structural design of space truss considering global buckling, and is to obtain the minimal weight of the structure. The mathematical programming method is used for optimization of each member by member force. Besides, dynamic programming method is adapted for consideration in snap-through buckling. The mathematical modeling for optimum design of truss members consists of objective function of total weight and constrain equations of allowable tensile (or compressive) stress and slenderness. The tangential stiffness matrix is examined to find the critical point on equilibrium path, and a ratio of the buckling load to design load is reflected in iteration procedures of dynamic programming method to adjust the stiffness of space truss. The star dome is examined to verify the proposed optimum design processor. The numerical results of the model are conversed well and satisfied all constrains. This processor is a relatively simple method to carry out optimum design with consideration in global buckling, and is viable in practice with respect to structural design.

• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.39-47
• /
• 2007

The travel speed between two locations within the downtown differs according to time horizon and district. Also, There is delay time on numerous traffic signals and bottle neck areas. It has an influence on planning the vehicle routing. However, there are almost no studies focusing on delay time for distance and travel time between two locations among the existing researches for vehicle routing problem (VRP). In this paper, we approach the real VRP by designing the model which estimates the delay time for traffic signal and bottle neck areas. The results of computation experiment demonstrate that proposed method performs well and have better solution than other method not considering the delay time.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.488-496
• /
• 2015

This paper proposes a framework to determine the routes of multiple unmanned aerial vehicles (UAVs) to conduct multiple tasks in different locations considering the survivability of the vehicles. The routing problem can be formulated as the vehicle routing problem (VRP) with different cost matrices representing the trade-off between the safety of the UAVs and the mission completion time. The threat level for a UAV at a certain location was modeled considering the detection probability and the shoot-down probability. The minimal-cost path connecting two locations considering the threat level and the flight distance was obtained using the Dijkstra algorithm in hexagonal cells. A case study for determining the optimal routes for a persistent multi-UAVs surveillance and reconnaissance missions given multiple enemy bases was conducted and its results were discussed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.114-120
• /
• 1999

본 연구는 Heuristic 알고리즘 및 유전자알고리즘(GA)을 이용하여 3단계의 통합차량운송계획 모델의 개발이다. 차량경로문제(VRP : Vehicle Routing Problem)를 해결하기 위한 접근방법으로 기존의 Saving 알고리즘을 개선하여 사용하였으며 유전자 알고리즘(Genetic Algorithm)의 각종 연산자 (Operators)들을 계산하여 사용하였다. 본 모델은 다음 3단계의 접근방법을 사용하였다 ; 1) 다 물류 센터의 문제해결을 위한 영역활당(Sector Clustering) 모델, 2) 경로계획모델(VRP Model), 및 3) 최적 운송계획모델(GA-TSP Model). 본 모델들을 다양한 운송환경에서, 거리산정방법, 가용운송장비 대수, 운송시간의 제한, 물류센터 및 운송지점의 위치 및 수요량 등 다양한 파라메터들을 고려한 통합시스템으로 3개의 Component로 구성된 GUI-Type 프로그램을 개발하고 Sample 응용결과를 보였으며 기존의 모델들 보다 우수한 결과를 보였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.743-747
• /
• 1996

A Potential Field Method is applied to the proposed algorithm for the planning of collision-free paths of redundant manipulators. The planning is carried out on the base of kinematic configuration. To make repulsive potentials, sources are distributed on the boundaries of obstacles. To escape from local minimum of the main potential and to attack other difficulties of the planning, various potentials are defined simultaneously, Inverse Kinematics Problems of the redundant manipulators are solved by unconstrained optimization method. Computer simulation result of the path planning is presented.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.425-433
• /
• 2012

Dijkstra's algorithm is one of well-known methods to find shortest paths over a network. However, more research on $A^*$ algorithm is necessary to discover the shortest route to a goal point with the heuristic information rather than Dijkstra's algorithm which aims to find a path considering only the shortest distance to any point for an optimal path search. Therefore, in this paper, we compared Dijkstra's algorithm and $A^*$ algorithm for bicycle route selection. For this purpose, the horizontal distance according to slope angle and average speed were calculated based on factors which influence bicycle route selection. And bicycle routes were selected considering the shortest distance or time-dependent shortest path using Dijkstra's or $A^*$ algorithm. The result indicated that the $A^*$ algorithm performs faster than Dijkstra's algorithm on processing time in large study areas. For the future, optimal path selection algorithm can be used for bicycle route plan or a real-time mobile services.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.5
• /
• pp.298-306
• /
• 2013

Nowadays, a transporter manager plans the schedule of the block transportation by considering the experience of the manager, the production process of the blocks and the priority of the block transportation in shipyard. The schedule planning of the block transportation should be rearranged for the reflection of the path blocking cases occurred by unexpected obstacles or delays in transportation. In this paper, the optimal block transportation path planning system is developed for rearranging the schedule of the block transportation by considering the damaged path. $A^*$ algorithm is applied to calculate the new shortest path between the departure and arrival of the blocks transported through the damaged path. In this algorithm, the first node of the damaged path is considered as the starting position of the new shortest path, and then the shortest path calculation is completed if the new shortest path is connected to the one of nodes in the original path. In addition, the data structure for the algorithm is designed. This optimal block transportation path planning system is applied to the Philippine Subic shipyard and the ability of the rapid path modification is verified.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.5_6
• /
• pp.195-201
• /
• 2007

A minimum terminal path decomposition of a tree is defined as a partition of the tree into edge-disjoint terminal-to-terminal paths that minimizes the weight of the longest path. In this paper, we present an $O({\mid}V{\mid}^2$time algorithm to find a minimum terminal path decomposition of trees. The algorithm reduces the given optimization problem to the binary search using the corresponding decision problem, the problem to decide whether the cost of a minimum terminal path decomposition is at most l. This decision problem is solved by dynamic programing in a single traversal of the tree.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.385-391
• /
• 2022

This paper presents to develop a path planning algorithm combining gradient descent-based path planning (GBPP) and particle swarm optimization (PSO) for considering prohibited flight areas, terrain information, and characteristics of fixed-wing unmmaned aerial vehicle (UAV) in 3D space. Path can be generated fast using GBPP, but it is often happened that an unsafe path can be generated by converging to a local minimum depending on the initial path. Bio-inspired swarm intelligence algorithms, such as Genetic algorithm (GA) and PSO, can avoid the local minima problem by sampling several paths. However, if the number of optimal variable increases due to an increase in the number of UAVs and waypoints, it requires heavy computation time and efforts due to increasing the number of particles accordingly. To solve the disadvantages of the two algorithms, hierarchical path planning algorithm associated with hierarchical particle swarm optimization (HPSO) is developed by defining the initial path, which is the input of GBPP, as two variables including particles variables. Feasibility of the proposed algorithm is verified by software-in-the-loop simulation (SILS) of flight control computer (FCC) for UAVs.