• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.31-36
• /
• 1997

We measured refractive indices and thicknesses of SiO$_2$ thin films that have been plated on LCD glass substrate for the purpose of preventing the out-diffusion of sodium ions. The best experimental condition to determine refractive index and thickness of SiO$_2$ thin film by using ellipsometry is searched for, where ⅰ) the film thickness is increased uniformly by 20 $\AA$ from 0 $\AA$ to the period thickness while the angle of incidence is fixed and ⅱ) the angle of incidence is increased uniformly by 1$^{\circ}$ from 45$^{\circ}$ to 70$^{\circ}$ while the film thickness is fixed. We estimated the errors in determining the refractive index and thickness by comparing the measurement error of $\Delta$ and Ψ with the calculated one. The ellipsometric constants of SiO$_2$ thin film on LCD glass substrate are measured at several angle of incidence around the Brewster angle, which is the best angle if the experimental error of ellipsometer is not sensitive to the incident angle. Also the best fit refractive index and thickness of SiO$_2$ thin film to these ellipsometric constants measured at several angle of incidenc eas well as the best fit ones to the SE data are obtained using regressional analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2231-2238
• /
• 2011

In this paper, the extract method of eye and eye-line from picture of a person is proposed. Most of existing papers are to extract the position of eyeball but in this paper, by extracting not only the position of eyeball but also eye-line, it can be applied to the face application program variously. The experimental data of the input picture is a full face photograph taken by smart phone, basically the picture is limited to the face of one person and back ground can be taken from every where and no restriction of race. The proposed method is to extract face candidated area by using Harr Classifier and set up the candidate area of eye position from face candidate area. To extract high value from eye candidate area using dilate operation, and proposed the method to classify eye and eyelash by local thresholding of the picture. After that, using thresholding image from eyemapC that Hsu's suggested, and separated the area with eye and without eye. Finally extract the contour of eye and detect eye-line using optimum ellipse estimation.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.17-24
• /
• 1997

As the first step to estimate the potential natural vegetation distribution of the globe, the best spherical interpolation method was developed to the temperature and precipitation which have close relation to the distribution pattern of world natural vegetation. For developing the interpolation method, a named Light Climatic Dataset composed of 1,060 stations around the globe was randomly divided into halves of feeding side and target side. The discrepancy between the observed and estimated values at the target stations was compared with combinations of parameters and methods. The estimated values were calculated to each combination which is all-out, constant radius and constant station methods in the selection of the feeding stations, n square reciprocal and negative exponential functions in weighting function of distance between feeding stations and each target, and oval weighting in direction of the feeding stations from each target. As a result, it turned out that the spherical interpolation with negative exponential weighting function fed from the constant radius stations ovally weighed yields the best estimates both for temperature and for precipitation. The parameters for temperature are $30^{\circ}$ in constant radius, 0.78 in negative exponential function and 0.4 in oval weighting, and for precipitation are $30^{\circ}$, 0.53 and 0.4, respectively.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.67-75
• /
• 2011

This paper presents the systematic optimal design of an overlapped ultrasonic sensor ring for high performance obstacle detection using effective beam overlap. Basically, a set of low directivity ultrasonic sensors of the same type are arranged in a circle at regular intervals with their beams overlapped. First, both real and simplified beam patterns of an ultrasonic sensor and several sensor models for obstacle position estimation within its beam pattern are introduced. Second, the obstacle detection range of an overlapped ultrasonic sensor ring and its simple sensor model for obstacle position estimation are described. Third, for both conic and non-conic shaped beam pattern, the design indices of an overlapped ultrasonic sensor ring for minimal positional uncertainty in obstacle detection are defined. Fourth, the constraints imposed on the structural parameters of an overlapped ultrasonic sensor ring to guarantee non empty beam overlap and to avoid excessive beam overlap are derived. Fifth, the optimal number of ultrasonic sensors for a given radius of an overlapped ultrasonic sensor ring and the optimal radius of an overlapped ultrasonic sensor ring are determined. Throughout this paper, the MA40B8 from Murata Inc. is taken as a representative commercial low directivity ultrasonic sensor.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.227-229
• /
• 1995

This paper attempts to examine an optimal method for the chromosome specific vector extraction. Usually, represented method are used with a line segmentation on a chromosome Image. It is not Inaccurate but also needs a long time for the analysis. This paper purpose to aquire specific vector in the image with a using optimal ellipse estimation method. Normally, shapes of chromosomes are curved and too difficult to analyze automatically. A chromosome has a lot of band which looks like an ellipse. If we can estimate their bands with an ellipse, we can reconstruct the sample Which Is straight and can be analyzed easily. We have rearranged a chromosome Image with above proposed. Result shows a reconstructed sample which Is simple for chromosome analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.26-26
• /
• 2022

본 연구는 하천중심선을 활용하여 Sentinel-1 위성영상기반 중소규모 하천 수체(水體) 추출 방법을 제안한다. 한강 유역의 한탄강 일부를 연구지역으로 선정하였으며, 이 지역을 촬영한 Sentinel-1 위성영상자료를 수집하였다. 여기에 개발한 방법의 검증을 위하여 유사시간대의 고해상도 광학위성 PlanetScope을 함께 수집하였다. 본 연구에서는 하천의 수체를 효과적으로 추출하기 위하여 국토지리정보원에서 제공하는 하천중심선 자료를 활용하였다. 하천중심선을 따라 유클리드 거리를 가중치로 산정한 자료(DST)와 Sentinel-1의 VH, VV 편광을 조합한 k-means 방법을 통해 위성영상의 픽셀을 군집화하였고, 최적의 매개변수 값을 산출하였다. 이 매개변수를 활용하여 Sentinel-1의 VV편광, VH편광 그리고 DST의 상관관계에 따른 타원방정식 형태의 계산식을 도출할 수 있었다. 수집한 자료의 검증결과 평균적으로 정확도는 0.65~0.75, kappa 계수는 0.8 내외를 보여 상당히 일치함을 확인할 수 있었다. 또한, 추가 확보한 30여 개의 Sentinel-1 위성영상을 제안 방법으로 추출한 수체의 면적과 유량 값을 비교해 본 결과, 유사한 변화 양상을 보였다. 본 연구는 하천 중심선자료를 활용하여 참값이 없더라도 수체 면적 추정이 가능함을 확인하였다. 제안한 방법은 현존하는 수체추출 방법보다 간단하고 신속하게 수체를 추출할 수 있을 것으로 보인다. 추후, 딥러닝을 통한 수체 식별을 추가 진행을 통해. 정확도를 높일 수 있을 것으로 기대한다.

• Journal of Korea Multimedia Society
• /
• v.4 no.2
• /
• pp.116-129
• /
• 2001

To improve the performance of the inverse halftoning, smoothing masks should be designed optimally by using the accurate information of halftone cells. In this thesis, the method of energy minimization is so defined as to determine the exact information of halftone cell. A heuristic search method is proposed to obtain efficiently the parameters of halftone cells which determine the minimum energy. A halftone-peak modeling method with several functions is proposed and used to get initial values of the parameters. The dimension decomposition technique is also adopted to speed up the search process of energy minimization. Several experiments show that the proposed method extracts correct location of the seed pixel of the halftone cell and the extracted information of the halftone cell can be used to get more exactly smoothed color images. The proposed method can be applied to extract the texture patterns, to separate channel images of a scanned color halftone image, and to extract the moire area in an image.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.280-288
• /
• 1996

In the ozone evolution using $PbO_2$, which was electrodeposited on Ti plate at various conditions in electrolyte, the effects of lead dioxide structure on the current efficiency and surface structure changes of lead dioxide were investigated. Also the effects of oxygen transfer reaction on the ozone evolution were investigated by means of a $PbO_2$ electrodeposited on the platinum rotating disk electrode. In order to develope an electrode for ozone evolution, durability of lead dioxide and optimum current density were investigated. At the electrodeposited lead dioxide with the larger grain size and higher crystallinity, the efficiency for ozone evolution was higher. Optimum current density to electrodeposite lead dioxide with large grain size and high crystalinity was $50mA/cm^2$. Lead dioxide deposited in the presence of glycerin showed the best advantage of ozone evolution. Also lead dioxide electrodeposited at less than $10mA/cm^2$ or at more than $100mA/cm^2$ has poor performance of ozone evolution and poor adhesive strength to substrate. In the beginning of ozone evolution, surface structure of lead dioxide was changed and this change resulted in good effects on ozone evolution. Lead dioxide doped with other elements was favorable not to ozone evolution but to oxygen evolution, so it is speculated that ozone evolution has not intermediate stage of oxygen evolution and occurs competitively with oxygen evolution. When ozone was evolved at $0.7{\sim}0.8A/cm^2$, the current efficiency was highest.