• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.69-75
• /
• 2001

Linear GPA(Gas Path Analysis) and non-linear GPA programs for performance diagnostics of a turboprop engine were developed, and a study for selection of optimal measurement variables was performed. Simultaneous faults in the compressor, the compressor turbine and the power turbine, which occur damage of the engine, were assumed. The non-linear GPA analysis was carried out with an iterative method, where the performance degradation rate of independent parameters was divided into same intervals. It was compared with the result by the Newton-Raphson method for observing the effect of an iterative method. According to the analysis result, it was found that performance of non-linear GPA can be influenced on the type of the iterative method. For showing effects of the number of measurement variables both the linear and non-linear GPAs were analyzed with 10, 8 and 6 measurement sets, respectively. RMS error between them were compared each other. It was realized that the more measurement parameters are used, and the more accurate result may be obtained. However much better result can be obtained with measurement parameters selected properly Moreover, RMS error by using non-linear GPA was less than that by using linear GPA.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.347-352
• /
• 2007

Recently, automated construction machines have been developed for technically solving construction industry problems such as labor, productivity, quality and the profit decrease. In domestic construction industry, a research for developing an intelligent excavation robot has been performed. The primary objective of this research is to analysis state-of-the art technologies in order to recognize local ground shape in real-time and compute soil volume of earth moving. This research analyzed five elemental technologies for 3D modeling of local ground shape and selected an optimal technology among the five technologies through using AHP method. It is anticipated that the optimal technology selected for 3D modeling of local ground shape can be effectively used to develop the intelligent excavation robot.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.83-90
• /
• 2002

Control point survey by GPS can save labor and time and can obtain result of high accuracy, but if excessive error is contained to Control point that is used to GPS relative positioning, the error that has influence on new point is propagated to various configuration. therefore poor triangulation points that are caused by careless management are existed, a product of the triangulation points still are in many case. In order to select new point, this study carried out error-analysis of surrounding-control-points and performed selective process of control point. The propriety parts of control points that are used to verify precision is identified by means of comparing existing product with or GPS product about some control points after directly observe each baseline by using EDM. As the error is analyzed by static positioning the optimum control point is selected, the precision of survey data by EDM is improved than GPS data.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.82-87
• /
• 2008

Faster, safer and cheaper mailing of the postal matter is essential for surviving in the competitive market of home-delivery service. In the past, the domestic delivery business has been nu by only a few number of companies. But more and more number of companies including medium size ones are participating in the business, and the competition is getting severe. This paper proposes a method to select the optimal location of mail distribution centers that minimally connect the local mail centers of some major cities in Korea using the Steiner Tree theory, which is about connecting a finite number of points with a minimal length of paths and has been used in the distribution system optimization and optimal routing of the transmission lines of the electric power system. By using Steiner Tree theory in finding the best location of the postal delivery hub, we may expect the reduction of transportation cost and the increase of profit, resulting in acquiring the superior position in the competitive delivery business. It is expected that we may use the Steiner Tree theory in finding the best location of the electric power substation for the nott higher EHV(extreme high voltage) transmission network.

• Korean Journal of Food Science and Technology
• /
• v.6 no.4
• /
• pp.219-230
• /
• 1974

For the production of single cell protein from n-paraffin, yeasts utilizing n-paraffin and ethanol were isolated from oil deposit and oil field soils. The mixed cultivation between yeasts assimilating n-paraffin and ethanol was carried out to increase cell yield. Finally, selected strains were identified and suitable medium composition for mixed culture was compared with that of single cultures using flask and 5 l-jar fermentor. Yeasts grow on n-paraffin and ethanol were identified as Candida tropicalis var. KIST 76 and Trichosporon cutaneum KIST 76H respectively. By mixed cultivation under the suitable medium composition using 5 l-jar fermentor, maximum dry cell weight reached 20 g/l after 12 hrs. cultivation and it's protein content was 58%. Yield has been increased about 25% and protein content has been increased 6.7% compared to that of single culture, Candida tropicalis var. KIST 76, after 16 hrs. cultivation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.259-259
• /
• 2018

최근 우리나라는 기후변화에 따른 태풍발생빈도 증가 및 이상강우, 유역내 토지이용의 고도화로 인한 유역특성 변화로 유역내 홍수량은 증가하고 홍수 도달시간이 짧아지는 양상을 보이고 있다. 이로 인해 홍수에 따른 치수방어 대책으로 하천의 제방축조 및 보강방법이 주로 채택되었으나, 최근에는 홍수시 직접적인 하천내 수위 저감을 위한 방안으로 하도내 저류효과를 확대하기 위한 보 설치 및 하도정비를 통한 하도준설을 시행하고 있다. 그러나 본류 하상저하에 따른 지류하천의 하상변동(두부침식)으로 하도내 세굴 침식에 의한 하천시설물 피해 사례가 늘게 되면서 과거 홍수에 의한 제방월류 피해에서 하상변동에 의한 하천시설물 붕괴로 하천피해 양상이 바뀌게 되었다. 이와 같은 피해를 방지하기 위해 지류하천 합류부에 하상변동 방지책으로 하상유지공을 설치하고 있지만 국내에는 이와 관련된 구체적 설계기준 및 연구가 미비하여 일선에서는 아직도 하천구조물의 용도가 다른 보나 낙차공의 설계기준을 준용하는 등 하상유지공 용도에 특성화된 설계기준(최적 위치선정 및 형식 등)이 없는 실정이다. 본 연구에서는 감천(낙동강 지류하천)유역내 하도준설 및 홍수로 인한 하상유지공의 유실에 따른 지류하천의 피해사례를 통해 수치해석결과 및 실측자료를 바탕으로 하상유지공 계획의 중요성을 검증하고자 하였다. 또한 하도준설로 생성된 지류합류부의 단차구간에 안정성을 확보한 최적의 하상유지공 위치 및 형식 등을 선정 검토하고 설치 유 무에 따른 유수흐름 및 하상변화양상을 비교 분석하였다. 본 연구의 결과를 토대로 향후 하도굴착 및 하상유지공 계획시 고려해야할 사항(지형현황 및 수리특성 등)을 인지하고 극한상황에서도 안전한 하상유지공의 위치 및 형식 등을 선정하는데 활용 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.33-33
• /
• 2019

최근 반복적인 도시침수 피해가 발생하고 있으나 다양한 강우 및 홍수 자료를 이용하여 실시간으로 침수분석을 실시할 수 있는 기술력이 부재한 실정이다. 한정된 시나리오에 따라 다양한 강우패턴에 의한 침수지역 파악에 어려움이 있으며, 불필요한 자료의 사용으로 인해 짧은 시간에 발생하는 도시침수에 대해 실시간으로 대응하는 데에 한계가 있다. 본 연구에서는 다양한 강우패턴과 극치강우 사상을 반영하기 위한 강우시간 분포법을 나타내고자 하였으며, 강우-유출 자료에 대한 최적의 자료조합을 선정하는 정량적 기준을 제시하고자 하였다. 지역 특성에 따른 극치강우사상의 시간분포에 대한 연구가 다양하게 진행되어 왔지만, 기존의 강우시간분포는 다양한 강우의 집중현상을 나타내기에는 한계가 있음을 보였다. 따라서 본 연구에서는 기존 강우시간분포 기법의 단점을 보완하고 극치강우사상의 집중지속시간 특성을 반영한 강우시간분포 방법과 Huff에 의한 강우시간 분포법을 사용하여 다양한 강우시나리오를 생성하였다. 본 연구에서는 부산 및 울산 연구대상지역의 도시유출해석의 입력 자료로서 사용하였다. 강우 및 유출 자료의 상관성 분석과 불확실도 분석을 기반으로 추후 홍수예측을 위한 최적의 입력 자료를 선정하고자 하였다. 위의 과정들을 통해 다양한 강우조건에 따른 연구대상 지역에서의 침수예상도를 분석할 수 있었으며, 선정된 극치강우사상을 통해 다양한 강우의 집중현상을 나타낼 수 있었다. 1차원 도시유출해석을 실시하여 구축한 강우-유출 데이터베이스의 최적화를 위해 불확실도 분석을 실시하였으며, 수리학적 특성이 고려된 입력 및 출력자료에 대한 사용자의 합리적인 판단을 위해 정량적 기준을 제시하고자 하였다. 더욱이 제시된 방법론을 이용함에 따라 지속적으로 나타나는 국지성 호우와 급변하는 수재해 양상에 능동적으로 대처하는데 도움을 줄 수 있는 기초자료를 제공할 것으로 판단된다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.343-347
• /
• 1997

Effect of culture conditions on the fermentation of wheat flour solution by mixed lactic acid bacteria of Lactobacillus brevis, L. fermentum and L. plantarum was investigated. The optimum temperature for the fermentation of wheat flour solution was $35^{\circ}C$ because pH decreased the lowest value and TTA (total titrable acidity) increased the highest value at this temperature. In aerobic condition, fermentor was purged with air at 1.0 vvm and was purged with nitrogen gas at 1.0 vvm in anaerobic condition. The decrease of pH and the increase of TTA in aerobic condition were higher than those in anaerobic condition. In aerobic condition, the optimum condition of oxygen supply was found to be oxygen transfer rate coefficient of $60\;hr^{-1}$ which corresponded to agitation speed of 250 rpm in a 5 L fermentor. Repeated fed-batch cultures were performed using pH-stat in order to increase the productivity of fermented wheat flour. With increasing the repeated fraction of culture volume, mean cycle time increased but maximum operation time decreased. However, the volume of produced broth per culture volume per time and total volume of produced broth per culture volume were maximum at the repeated fraction of culture volume of 20%. In a repeated fed-batch fermentation of wheat flour solution using mixed lactic acid bacteria, the culture condition was optimum at temerature of $35^{\circ}C$, aeration rate of 1.0 vvm, oxygen transfer rate coefficient of $60\;hr^{-1}$, and repeated fraction of culture volume of 20%.

• Journal of Korea Water Resources Association
• /
• v.42 no.7
• /
• pp.537-546
• /
• 2009

Determination of optimal pressure monitoring location is essential to manage water distribution system efficiently and safely. In this study, entropy theory is applied to overcome defects of previous researches about determining the optimal sensor location. The previous studies required the calibration using historical data, therefore, it was difficult to apply the proposed method in the place where the enough data were not available. Also, most researches have focused on the locations to minimize cost and maximize accuracy of the model, which is not appropriate for the purpose of maintenance of the water distribution system. The proposed method in this study quantify the entropy which is defined as the amount of information calculated from the pressure change due to the variation of discharge. When abnormal condition is occurred in a node, the effect on the entire network is presented by the entropy, and the emitter is used to reproduce actual pressure change pattern in EPANET. The optimal location to install pressure sensors in water distribution system is the nodes having the maximum information from other nodes. The looped and branched networks are evaluated using the proposed model. As a result, entropy theory provides general guideline to select the locations to install pressure sensors and the results can be used to help decision makers.

• Journal of Korea Water Resources Association
• /
• v.55 no.3
• /
• pp.191-203
• /
• 2022

This study is a follow-up study of vulnerable areas according to the vulnerability assessment of groundwater resource management in Korea. In this study, an optimal operation plan for groundwater resource management was proposed for areas vulnerable to groundwater resource management in Korea derived from previous studies. Prior to presenting the optimal operation plan for groundwater resource management, this study grasped the current status of changes in groundwater level and seawater penetration area for vulnerable areas using MODFLOW, a groundwater flow analysis program. As a result of the analysis using basic data for 10 years from 2009 to 2018, the groundwater level fell and the sea infiltration area increased. The final purpose of this study, the optimal operation plan for groundwater resource management, was selected as a total of four alternatives that can be expected to have positive effects to increase groundwater level and reduce seawater penetration. As a result of analyzing the amount of change in groundwater level and seawater penetration by applying the selected optimal operation plan, positive effects were found in all methods. It is expected that the optimal operation plan for groundwater resource management proposed in this study will be applied not only to vulnerable areas of groundwater resources in Korea but also to areas requiring development to establish efficient groundwater resource management measures.