• Journal of Energy Engineering
• /
• v.18 no.4
• /
• pp.213-220
• /
• 2009

The experimental characteristics for fry drying method was investigated using low-rank coal with a high moisture content. Final temperature, mixing ratio between coal and kerosene, content of coal or kerosene, total weight of the mixture and mixing methods were varied to find out the optimum conditions by measuring moisture of coal. Evaporation of the coal moisture was not completed below $120^{\circ}C$ of final temperature. The amount of moisture was not significantly different over $130^{\circ}C$. Coal moisture was easily evaporated by increasing coal content, which showed that the moisture evaporation could be significantly enhanced by the remove of evaporated moisture from kerosene rather than by heat transfer to the coal. High total weight of the mixture resulted in lowering moisture content of coal with long evaporation time. On the other hand, low total weight was difficult to reduce the moisture below a certain level, but could reduce evaporation time. Thus, it can concluded that kerosene content should be lowered to the extent maintaining the mobility of the mixture in order to enhance evaporation. It was also observed that evacuation and mixing by using nitrogen could improve drying of coal.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.105-112
• /
• 2017

A lot of piping systems have been used from nuclear power systems to water supply systems. The maintenance of the piping systems is needed to ensure proper operation of the piping systems. Failure of the large pipe systems especially such as KDHC(Korea District Heating Corporation) can be a matter directly related to the enterprise productivity and profitability. It can also lead to very important issues in promoting public safety and convenience. Therefore a method of quick and safety repairs have been emerged as the most important problem. In this study, freezing seal isolation method using liquid nitrogen cryogenic refrigerant was developed for the maintenance of a pre insulated heat transport pipe of KDHC with a diameter of 300 mm. In this study, by employing computational analysis techniques we performed the flow and heat transfer analysis for the targeted pre insulated heat transfer pipe and freezing seal jacket(ice-Plug) and have selected for optimal system. The detailed design model based on the results of the computational analysis finally was produced. A laboratory-scale test apparatus were designed and the freezing seal isolation self-test carried out. Also the performance assessment tests in the test bed of KDHC were carried out for on-site application.

• Explosives and Blasting
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2013

In blasting demolition, a method would be chosen among many depends on shape and system of a structure and its surround. To demolish using explosives a structure, which is asymmetric and with high aspect ratio, pre-weakening, explosive locations, detonating delay, and surround conditions are needed to be considered in front to design blasting demolition plan. In this study, to over turn asymmetric and high aspect ratio structure in safe, a simulation using a software named Extreme Loadings for Structures, ELS, had performed. In results, it is achieved optimized pre-weakening shapes and locations, which prevent kick back motion of the structure when it collapse, by analyzing moment distribution caused by pre-weakening. And of structural collapse and by minimizing asymmetric structure's torsional moment. Also, after the demolition, simulation results are also compared with actual collapse behavior. In results, it is confirmed the accuracy of collapse behaviour simulation results, and in blasting demolition, kick back motion can be controled by adjusting pre-weakening shape and location, and the torsional moment of an asymmetric structure also can be solved by optimizing detonation locations and its time intervals.

• Korean Journal of Food Science and Technology
• /
• v.47 no.4
• /
• pp.452-459
• /
• 2015

The effects of aronia powder on the rheological and sensory characteristics of Sulgidduk were investigated. The moisture content of Sulgidduk ranged from 40.86 to 44.40%; however, addition of aronia powder to Sulgidduk tended to decrease its moisture content. With regard to the rheological properties, the addition of aronia powder decreased the hardness, springiness, adhesiveness, cohesiveness, chewiness, gumminess, and brittleness of Sulgidduk. Chromaticity determination revealed a decrease in L and b values, while the a value increased with the increasing amounts of aronia powder. Total polyphenol, total flavonoid and total anthocyanin contents increased with the increasing amounts of aronia powder. Antioxidant activity, measured by DPPH and ABTS radical scavenging activities, was significantly higher than that of the control, and increased proportionally with the amount of aronia powder. During 4 day storage, the growth of total aerobic colony and coliform content significantly decreased with increasing levels of aronia powder in Sulgidduk. Sensory evaluation demonstrated the best score in color, taste and overall acceptance when aronia powder was added at 5% of rice powder. These results suggest that 5% aronia powder can be added for the preparation of Sulgidduk.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.529-535
• /
• 1998

This study was made to investigate the effect of variation in pulping process conditions such as wastepaper blending treatments, temperature, and chemical blending treatments on the deinked pulp. Design of experiments was used to select the major factors which significantly influenced on the deinked pulp. As one of the statistical analysis technique, analysis of variance and multiple comparison technique was used to find the best process condition and the predicted values and confidence intervals for brightness and strength were obtained. In the condition of $Na_2SiO_3$ 2.0%, $H_2O_2$ 0.5% and wastepaper blending treatments (KONP : AONP : OMG = 40 : 30 : 30 wt %) the highest brightness of 50.5% was predicted with 90% confidence interval (49.0, 52.0). On a concentration of $H_2O_2$ 0.5%, the highest tensile index of $35.7N{\cdot}m/g$ was predicted with 90% confidence interval (34.6, 36.6) at the pulping temperature of $50^{\circ}C$. On a concentration of surfactant 0.1%, the highest burst index of $0.129kPa{\cdot}m^2/g$ was predicted with 90% confidence interval (0.125, 0.133) at the pulping temperature of $50^{\circ}C$.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.596-603
• /
• 2008

Lactobacillus acidophilus is a normal inhabitant of the human intestine and its numerous health benefits have been reported. This organism is referred to as a "starter culture". This study was conducted to verify that the production of flavor compounds in fermented milk was obtained using a good probiotic strain of L. acidophilus from breast-fed infant feces. The bitter-tasting amino acids, such as arginine and histidine were produced in larger amounts than other free amino acids when L. acidophilus strains were inoculated in skim milk. The lactic acid was the major acid produced from glucose. L. acidophilus NB 209 was the best producer of lactic acid. This L. acidophilus NB 209 produced higher amounts of acetaldehyde than other L. acidophilus strains. L. acidophilus NB 209 gave higher flavor and taste score of the yogurt produced than other L. acidophilus strains in sensory evaluation. These results indicate that L. acidophilus NB 209 has the potential to be developed as a starter culture for fermented milk products.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.347-352
• /
• 2003

In order to compare quality characteristics and oxidative stabilities of rice germs prepared under different roasting conditions, sensory evaluation, color value, tocols (tocopherol+tocotrienol) contents, and peroxide value were investigated. Optimum roasting temperatures for the best acceptability were 20, 10, and 6 min at 170, 180 and 190, respectively. Hunter color a values of rice germ increased as roasting temperature and time increased, whereas L value decreased. Peroxide values of unroasted, and roasted rice germs at $170^{\circ}C$ for 20 min, $180^{\circ}C$ for 10 min, and $190^{\circ}C$ for 6 min were 2.0, and 145.6, 169.5, and 182.9 meq/kg, respectively, after 9 days storage at $60^{\circ}C$. Four tocopherol and three tocotrienol isomers were identified, whereas no ${\beta}$-tocotrienol was detected. The major tocopherol and tocotrienol isomers in rice germ were ${\alpha}$-tocopherol and ${\alpha}$-tocotrienol, respectively. ${\alpha}$-Tocopherol content in roasted rice germ decreased significantly during storage, whereas those of ${\beta}$- and ${\gamma}$-tocopherols slowly decreased. ${\delta}$-Tocopherol had the highest stability among tocopherol isomers in roasted rice germ. Similar trends were observed in tocotrienol isomers.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.386-392
• /
• 2003

Physicochemical and microbiological changes of grape wine fermented and aged at 25 and $15^{\circ}C$ for 2 and 14 weeks, respectively, were investigated. Viable bacterial cell number, $3.3{\times}10^2\;CFU/mL$ at the beginning of fermentation, increased to $2.3{\times}10^6\;CFU/mL$ after 2 weeks, then decreased to $1.9{\times}10^3\;CFU/mL$ after 14 weeks. Viable yeast cell number increased from $2.8{\times}10^2\;to\;2.2{\times}10^7\;CFU/mL$ during fermentation, then decreased to $1.6{\times}10^4\;CFU/mL$ after aging. Turbidity, pH, total sugar content, reducing sugar content, and solid content of grape wine decreased during fermentation, whereas acidity and alcohol content increased to 0.64 and 8.4%, respectively. Most physicochemical properties did not change significantly during aging. When grape wine was filtered through $0.45-{\mu}m$ nitrocellulose membrane, followed by various ultrafiltration membranes with different molecular weight cut-off values, Biomax 100K membrane with $100\;L/m^2/hr$ (LMH) of initial flux was chosen for ultrafiltration process. These membrane filtration treatments resulted in complete removal of microorganisms and decreases in turbidity, reducing sugar, and solid content. Physicochemical properties of wine did not change, and no microorganisms were found during storage at $30^{\circ}C$ for 12 weeks.

• Child Health Nursing Research
• /
• v.20 no.2
• /
• pp.75-86
• /
• 2014

Purpose: The purpose of this study was to describe the components and content of nursing intervention studies on mother-infant interactions and to present strategies for future studies. Methods: Four electronic databases in the Korean language were searched to identify studies done between January 1998 and December 2011. The search yielded 145 articles. From these articles, 19 studies met the inclusion criteria. Results: Mother-infant interactions in these studies were found to include verbal and non-verbal communication basic for optimal growth and development of the child. Six kinds of interventions for mother-infant interactions were identified as follows: sensory stimulation, education program, whole body massage, kangaroo care, visiting support, and music therapy. Conclusion: Further studies with well designed clinical trials need to be done in the area of child nursing to provide evidence based data for the development of strategies to promote positive mother-infant interactions.

• Journal of Korea Water Resources Association
• /
• v.30 no.4
• /
• pp.347-355
• /
• 1997

In this study, the applicability of genetic algorithms into the parameter estimation of storage function method for flood routing model is investigated. Genetic algorithm is mathematically established theory based on the process of Darwinian natural selection and survival of fittest. It can be represented as a kind of search algorithms for optima point in solution space and make a reach on optimal solutions through performance improvement of assumed model by applying the natural selection of life as mechanical learning province. Flood events recorded in the Daechung dam are selected and used for the parameter estimation and verification of the proposed parameter estimation method by the split sample method. The results are analyzed that the performance of the model are improved including peak discharge and time to peak and shown that the parameter Rsa, and f1 are most sensitive to storage function model. Based on the analysis for estimated parameters and the comparison with the results from experimental equations, the applicability of genetic algorithm is verified and the improvements of those equations will be used for the augmentation of flood control efficiency.