• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.142-147
• /
• 1993

For the purpose of fixing solar energy and utilizing water wastes from food industries for SCP(single cell protein), 170 strains of photosynthetic bacteria were isolated from 56 samples. Among 170 strains, B-Ps-106 strain was selected as the most suitable strain and identified as a variant or a relation of Rhodopseudomonas sphaeroides and its growth was better under anaerobic light condition than aerobic condition. The optimum conditions of the cell growth of B-Ps-106 were investigated on soybean-curd whey media. The optimum pH for cell growth was $8.5{\sim}9.0$. The optimum temperature was $30^{\circ}C$ and the optimum light density was above $0.72\;cal/cm^2/min$. The most favorable concentration of $K_2HPO_4\;and\;(NH_4)_2SO_4$ was both 0.9 g/l when added to soybean-curd whey media.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1068-1072
• /
• 2006

최근 하천의 유지유량을 결정함에 있어서 어류의 서식환경을 고려하여 최적의 유량규모를 제시하는 연구결과가 국내 여러 연구자에 의해서 제시되고 있다. 하천에서의 어류 서식처를 고려한 유지유량의 결정방법은 미국에서 제시된 유지유량증분 방법론(Instream Flow Incremental Methodology)에 근본을 두고 있으며 대부분의 방법이 어류 서식처에 대한 수리모의를 위해서 1차원 수리모형을 이용하여 왔다. 특히 어류 서식처에 대한 1차원 수리모의를 위하여 물리적 서식처 모의시스템(PHABSIM)이 가장 보편적으로 적용되고 있으며 모의 결과로 제시되는 어류 서식처의 가중가용면적(Weighted Usable Area)을 토대로 하여 최적 유량의 규모를 제시하게 된다. 따라서 본 연구에서는 어류 서식처를 고려한 하천유지유량 산정함에 있어서 최적유량 결정에 중요한 지표로 사용되는 가중가용면적(WUA)을 산정함에 있어서 일반적으로 사용되어 온 1차원 수리모형인 PHABSIM을 이용한 결과와 함께 최근 개발되어 수리학 분야에서 폭넓게 적용되고 있는 2차원 수리모형을 이용하여 산정된 결과를 비교하여 제시하고자 한다. 본 연구에서는 2차원 수리해석을 위해서 River2D를 이용하였으며 한강수계의 주요 지천을 선정하여 2가지의 서로 다른 수리모의 결과를 비교하였다. 대상 어종은 어류상 조사 결과, 각 지천의 우점종인 피라미를 선정하였으며 수리해석에 의한 어류의 서식처 모의를 위하여 필요한 서식처 적합도 지수 Habitat Suitability Criteria)는 낙동강 수계에서 작성된 결과를 이용하였다. 각 1차원 및 2차원 수리해석에 의해서 산정된 가중가용면적에 대한 상관분석을 실시하였으며 유지유량 증분방법론(Instream Flow Incremental Methodology)의 개념에 입각하여 최적의 유량 값을 산정하였다. 각 지점에서의 가중가용면적-유량 관계를 모의하고 대상 어종의 성장 단계별(산란기, 성어기) 가중가용면적(WUA)을 산정하여 비교.분석하였으며 분석결과 가중가용면적(WUA)값의 분포가 성어기, 산란기에서 선형(linear)으로 잘 표현되었다.

• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.656-664
• /
• 2018

The following study was conducted to determine the optimal location in terms of efficiency for solar energy facilities, and to propose a policy implications for the orientation of the installments. 92 cases in Jeollanam-do Province were selected. A regression analysis was performed between the average electricity generation time as the dependent variable, and the facility, weather and site conditions as the independent variables. As a result, 5 variables were deemed significant. Larger site areas, closer proximity to rivers, islands, oceans, etc., least south-oriented, higher average wind speed, and facilities in agricultural land use and natural environment conservation land use had the highest efficiency. This study minimized the possibility of secure databases and errors following facility types, and was limited in the number of sites studied, since this was only conducted in Jeollanam-do Province. Nevertheless, these conclusions still offer important policy implications for determining the most optimal location for solar energy facilities.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.163-176
• /
• 1993

A methodology based on the influence coefficient algorithm was established for the optimal calibration of QUAL2E reaction coefficients. It was applied to the stream sections from the Chungju Dam to the downstream end of the South Han River. A water budget analysis using the monthly records of reservoir inflows and outflows in 1990 was made to determine tributary inflows. Estimated tributary inflows were used, together with the monthly records of water quality measurements in 1990, for the calibration of reaction coefficients. Simulated quality constituents were chl.a. nitrogen cycles, phosphorus cycles. BOD and DO. A sensitivity analysis was made to determine significant reaction coefficients, and as a result 11 reaction coefficients were selected as calibration parameters. The influence coefficient algorithm applied to the calibration of QUAL2E reaction coefficients proved to be a useful one yielding a rapid convergence. Each calibration parameter converged to an optimum value within 3 iterations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.193-205
• /
• 2011

This paper suggests $p$-facility locations in $m$ candidate locations and $n$ areas in optimal cost side(population${\times}$shortest distance). This problem has been classified by NP-complete because there is not a polynomial time algorithm. In this paper, we suggests reverse-delete method that deletes a candidate facility one by one from $p=m$ until $p=2$. As a result of the proposed algorithm for the $5{\times}5$ and $7{\times}7$, the initial solution is obtained. For the Swain's 55-node network, we obtain the optimal solution through a solution improvement process with $p=4$ and it by using the initial solution with $p=5$.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.677-686
• /
• 2006

In this paper, a more practical and realistic method is proposed to establish the lifetime optimum maintenance strategies of the deteriorating bridges considering the life-cycle performance as well as life-cycle cost. The genetic algorithm is applied to generate the set of maintenance scenarios that is the multi-objective combinatorial optimization problem related to lifetime performance and cost as separate objective functions, and the technique to select optimum tradeoff maintenance scenario is presented. Optimum maintenance scenarios could be generated not only at the individual member level but also at the system level of the bridge. Through the analytical results of applying the proposed methodology to the existing bridge, it is expected that the methodology will be effectively used to determine the optimum maintenance strategy for introducing a real preventive maintenance system and overcoming the limits of existing maintenance methods.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.457-462
• /
• 2009

In this paper we suggest optimal positioning algorithm for DER(distributed energy resource)s near ocean side by using Newton-Rhapson load flow calculation. By installing DERs within urban area, electric power can be effectively transmitted to each loads without constructing additional large scale power stations and transmission lines. Therefore, DERs have attracted worldwide attention as urban area energy sources. However, there are quite a few studies for estimation of power loss due to DERs' location change within urban area Hence, in this study, an optimal positioning scheme for DERs is proposed in order to minimizing electrical power loss.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.255-266
• /
• 2009

In this study, a robust aerospace system design process for the aerospace system is developed by considering the uncertainties of user requirements, manufacturing errors, and operational environment variation. User requirements are analyzed and quantified by decision making models and system engineering methods to select alternative concepts which satisfies the various requirements. Robust design and optimization method is applied to derive the robust solution of the selected system. First, a variance of objective function is calculated, and a mean value and a variance of target value are determined by the deterministic design optimization results of the system. A robust optimum design formulation is then needed to derive the robust solution that minimizes the variance of the response and moves the mean values to the target value. It is applied to Very Light Jet (VLJ) aircraft to which much attention is paid recently in civil aerospace market.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2001

Soybeans contain the phytoestrogens genistein and daidzein, their glucosides genistin and daidzin and coumesterol. These isoflavonoid compounds are capable of producing an estrogenic response in a number of diverse species. This study determined optimum conditions for the extraction of the main isoflavones(daidzin, genistin, daidzein, genistein) in defatted soybean meal using high-performance liquid chromatography. The best optimum extraction was achieved at 75% ethanol, $80^{circ}C$, pH4 and a three hour contact time. In addition, isoflavones with high purity were separated by adding up to 4%(w/v) of calcium chloride dihydrate. Most soybean extracts were composed of $beta$-glucosidic conjugate(daidzin, genistin) which is difficult to adsorb in body. Therefore, $beta$-glucosidase was used to convert as conjugate to aglycone form (daidzein, genistein) which is easy to adsorb. The optimal conditions of enzyme reaction involved to be 8.4 units of enzyme concentration, pH5.0, $40^{circ}C$ and 40 minutes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.304-304
• /
• 2021

도시화가 진행됨에 따라 불투수지역이 늘어나는 등 개발전과 다른 지표 및 지표하 유출이 나타나며, 이러한 변화는 생태적, 수문학적으로 대규모 변화가 나타나는 것을 의미한다. 이에 따라 물관리, 물순환 등 물 지속 가능성은 대중의 관심을 받아 법, 제도가 변화하며 도시화에 대한 세심한 접근과 관리에 대한 계획이 대두되고 있는 실정이다. 저영향개발(Low Impact Development)은 이러한 도시화로 인해 발생될 수 있는 문제를 해결하기 위한 방안의 하나로 제안되고 있으며 첨두 및 유출총량을 완화하여 개발 이전 상태의 수문학적 기능을 유지하거나 물리학 및 생물학적 기작을 통해 오염물질의 저감효과도 나타나 대규모 도시개발 및 유역관리 사업에서 저영향개발기법의 적용이 점차 늘어나고 있는 추세이다. 그러나 저영향개발기법 설치에 관한 구체적인 매뉴얼 또는 가이드라인이 부족한 실정이기 때문에 저영향개발기법이 계획단계에서 양적으로 무분별하게 적용되어 비용적 측면에서 시공자에게 부담을 가중시키는 등의 문제가 발생한다. 또한 시설의 위치에 따라 강우유출수 및 비점오염원 저감에 대한 효과가 상이하기 때문에 시설의 적정 위치선정 및 시설용량, 경제성을 고려한 시설효과 검토 등 저영향개발기법 적용시 사업부지 특성에 따른 최적화를 고려하여 계획 및 설계에 적용할 필요성이 있다. 이에 비용적 측면을 고려한 최적설계가 가능한 SWMM-ING(Storm Water Management Model - Low impact development desigN proGram)을 개발된 바 있다. SWMM-ING은 비전문가도 사용이 가능하도록 저영향개발기법 최적화과정이 간단하고 직관적이며 비용을 고려한 최적설계가 가능하도록 개발된 소프트웨어로 기법 적용시 개략적인 비용추정 및 배치선정 등 저영향개발기법의 설계최적화가 가능하다. 또한 각각의 저영향개발기법에 대한 초기설치비용, 유지관리비용, 이자율, 기대수명, 대상지역 내 공간적 위치를 반영하여 강우유출수 및 비점오염저감효과를 시나리오별로 제시가 가능한 장점이 있다. 본 연구에서는 SWMM-ING를 이용하여 대규모 도시개발부지의 저영향개발기법 적용에 따른 유량 및 수질저감효과를 평가하고 유지관리비를 포함한 비용을 추정하여 최적설계 검토를 수행하였다.