• The Journal of Engineering Research
• /
• v.6 no.1
• /
• pp.5-14
• /
• 2004

Finding a solution to a constraint satisfaction problem requires choosing values for variables so as to satisfy the constraints of the problem. A constraint is simply a logical relation among several unknowns (or variables), each taking a value in a given domain. Conventional constraint-based scheduling systems are not enough to satisfy the all constraints because there are conflicts between them. In this paper, we propose a method for interactive scheduling, which have two major problems: first, it is hard to satisfy concretely all various kinds of constraints, and second, the search space is extremely large and requires a long execution time. To solve the above problems, we introduce the Interactive Scheduling System (ISS) that interacts with the user to exchange suggestions each other. Our system is performed in two steps: knowledge base generation of an initial assignment and iterative improvement with the user(host or internet client) to satisfy the constraints. Applying our system, we actually constructed timetables for our university, where the scheduling time is considerably reduced.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.162-165
• /
• 2016

Ethylene ($C_2H_4$) is a naturally occurring hormone in some fruit. This study was carried out to manufacture ethylene-producing tablets. The Ethylene-producing tablets were manufactured from ethephon and excipient mixtures, including Prosolv, Hydroxypropylmethylcellulose (HPMC) and Crosscamellose. Ethylene production increased with the increases in temperature. In the aspect of pH condition, ethylene productions at pH 7.0 and pH 9.0 were less than 2 ppm. On the other hand, at pH 13.0, ethylene production from the Prosolv, HPMC, and Crosscamellose tablets was 94.05, 126.28, and 100.11 ppm, respectively. The friability of the Prosolv and HPMC tablets were 0.1 and 0.3%, respectively, while the Crosscamellose tablet was 54.1%. indicating that the Crosscarmellose tablet was not appropriate as an ethylene production tablet. In addition, there were huge variations in disintegration times; the Prosolv, Crosscamelose, and HPMC tablets took 1, 5 min, and 7 min more than respectively. Ethylene production was gradually increased up to 20 hr for the Prosolv tablet and then remained stable.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.408-414
• /
• 2013

The famous filtered-x least mean square (FxLMS) algorithm for active noise control (ANC) systems may become unstable in non-stationary noise environment. To solve this problem, Sun's algorithm and Akhtar's algorithm are developed based on modifying the reference signal in update of FxLMS algorithm, but these two algorithms have dissatisfactory stability in dealing with sustaining impulsive noise. In proposed algorithm, probability estimation and zero-crossing rate (ZCR) control are used to improve the stability and performance, at the same time, an optimal parameter selection based on fuzzy system is utilized. Computer simulation results prove the proposed algorithm has faster convergence and better stability in non-stationary noise environment.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.5
• /
• pp.393-401
• /
• 2013

In this paper, a $48{\times}64$ channel 2D array ultrasonic transducer with piezoelectric single crystals was designed, fabricated, and evaluated. Structure of the transducer was chosen to facilitate the electric connection on the planar array, and then components were fabricated in accordance with the structure. Detailed structure of the transducer was designed through finite element analyses. In order to improve the performance of the transducer, the crosstalk between adjacent elements was reduced through the control of kerf width and material, and the target frequency bandwidth was achieved through optimal design of the thickness of the single crystal and matching layers. After fabricating a prototype of the transducer according to the design and measuring its characteristics, the results were compared with those of finite element analyses to evaluate the performance of the developed transducer.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.111-118
• /
• 2017

In this paper, combustion tests were performed to investigate performance characteristics of a canted slit-type pintle injector engine which uses kerosene and liquid oxygen as propellants. The number of slits, slit angle and blockage factor were chosen as design variables of the pintle injector. ${\Delta}SR$ was newly defined as the difference of skip ratio caused by both sides of the tip of the canted slit. The experimental results showed that optimal combustion was performed when the blockage factor is about 1 and the difference is less than 0.26.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.31-41
• /
• 2018

This study aims to analyze region-based pedestrian evacuation behaviors and information offering effect using Social Force Model, which is micro simulation. All pedestrians were assumed to move to shelters through pedestrian roads according to guidance information at emergency situations, and the pedestrians were classified into adults and the handicapped. According to the results of the road network analysis and simulation analysis, the shelters to which pedestrians can move within the shortest time from each zone were selected as optimum shelters. From this study, the analysis showed that the information provision effects are informative even though total evacuation time increases due to the increase of pedestrian conflict. This study can be used as baseline data for urban area's pedestrian disaster prevention plans.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.223-230
• /
• 2017

BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.3
• /
• pp.167-175
• /
• 1996

Recently, the mortar crack on floor is very serious in construction field, e.g. the crack due to plastic shrinkage and the crack due to drying shrinkage. To prevent this kind of crack, optimum mix proportions not only satisfying the required workability but also minimizing the unit water content were selected. And the expansion admixtures were used to compensate shrmkage of mortar. The water /cement ratio used in construction field is about 64% by the investigation. Even if the water /cement ratio of mortar is reduced, floor mortar is still able to have the required workability by the appropriate use of the fine aggregate with high fineness mo'dulus and superplastizer. The equations hetween mortar flow and water /cement ratio, sand /cement ratio, fineness modulus of fine aggregate were proposed in this study. And the proposed equation may provide available mix proportions of floor mortar.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.535-539
• /
• 2008

Conversion to oil, yield of styrene and formation of side products such as ${\alpha}-methyl$ styrene, ethyl benzene, benzene, toluene, dimer and trimer were affected by residue formed during thermal degradation. Also, control of reaction temperature had a difficulty at the first stage. Thus, new reaction system using wetted-wall type reactor was proposed and examined on various parameters such as reaction temperature, feeding rate and removal velocity of formed vapor. Optimun condition was obtained from continuous thermal degradation using wetted-wall type reactor and reaction kinetic study was carried out at new type reactor.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.271-278
• /
• 2004

In this paper, we propose a content-based audio genre classification algorithm that automatically classifies the query audio into five genres such as Classic, Hiphop, Jazz, Rock, Speech using digital sign processing approach. From the 20 seconds query audio file, the audio signal is segmented into 23ms frame with non-overlapped hamming window and 54 dimensional feature vectors, including Spectral Centroid, Rolloff, Flux, LPC, MFCC, is extracted from each query audio. For the classification algorithm, k-NN, Gaussian, GMM classifier is used. In order to choose optimum features from the 54 dimension feature vectors, SFS(Sequential Forward Selection) method is applied to draw 10 dimension optimum features and these are used for the genre classification algorithm. From the experimental result, we can verify the superior performance of the proposed method that provides near 90% success rate for the genre classification which means 10%∼20% improvements over the previous methods. For the case of actual user system environment, feature vector is extracted from the random interval of the query audio and it shows overall 80% success rate except extreme cases of beginning and ending portion of the query audio file.