• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.1-7
• /
• 2005

The optimal seismic retrofitting of NPP(Nuclear Power Plant) cabinet structures that contain seismic category 1 relays was studied in this paper. During earthquake event, the failure modes of relays are not appeared in form of structural failure, but are appeared in form of contact chatter of relay. Therefore, the retrofitting of cabinet has to be aimed at the reducing of the structural response, such as acceleration. In this study, the optimal characteristic values of dampers were searched by ${\mu}$-GA (micro-Genetic Algorithm) scheme for several installation patterns. To keep accuracy and efficiency of analysis, the structural models of cabinet were considered as a frame structure. The responses of structure were obtained inform of acceleration response spectra derived from the results of nonlinear time history analysis including damping nonlinearity. The objective function of the optimum procedure was constructed based on the maximum ratio of maximum spectral value and target GERS (General Equipment Ruggedness Spectra). The results show the good improvements of fitness for adequate retrofitting pattern. Especially, the improvements of fitness were remarkable when the values of damping exponents are low.

• Science of Emotion and Sensibility
• /
• v.18 no.3
• /
• pp.93-106
• /
• 2015

In accordance with escalating demands for advanced technology products, the smart clothing that includes embedded ICT technology have expanded into fields of daily life. As a result of this trend, interest in smart clothing with digitally controllable heating has rapidly grown and the market for smart heated clothing has also expanded. Increasing of prospect in smart heated clothing market, the effectiveness and thermal sensation research of the location on the pad attached is insufficient. This study was conducted to find the optimal location of heated clothing via experimental research on changes in skin temperature and subjective thermal sensation when heating pads were placed on different areas of the body. For this experiment, the subjects consisted of 10 males in their 20's of standard physique. The skin temperature at 11 different areas of the body, rectal temperature, and subjective thermal sensation were taken at different stages (before testing, after a 20 minute rest period, 20 minute treatment period, and after a 40 minute recovery period) in an artificial-climate chamber at $-5^{\circ}C$. As a result, the optimal location for heating pads in smart clothing was estimated and suggested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.212-216
• /
• 2011

현재 하천 건천화에 따른 수생태계 교란 및 수질악화 등의 근본적인 문제가 발생하고 있으며, 최근 정부의 저탄소 녹색성장기조에 따라 조성되고 있는 신도시, 소규모 및 대규모 택지개발사업의 경우는 환경 친화적인 단지조성 요구에 부응하기 위해 기존 도심하천의 복원 및 인공하천의 녹색성장을 고려한 친환경적 생태하천으로 조성하고자 하는 다양한 노력이 시도되고 있으나 안정적인 생태복원의 수원확보 방안을 마련하지 못해 실제 설계가 반영되지 못하고 있다. 또한, 조성하고자 하는 소하천 혹은 실개울 등의 수질보전 및 생태계 보호 등 하천이 본래의 기능을 유지할 수 있도록 생태하천유량을 확보하는 다양한 기술들이 개발되어 있지만, 공사 유형과 주변 환경에 적합한 생태하천유량 확보 방안을 선정할 수 있는 비구조적 대책마련이 부족한 실정이다. 이러한 실정과 문제점을 고려해 볼 때, 조성하고자 하는 도시 내 자연하천 및 인공하천 조성 등 수변환경을 고려한 단지조성에 맞는 생태하천유량 확보 방안 및 평가에 대한 연구가 단계적으로 이루어져야 할 것이다. 따라서 본 연구에서는 생태하천유량 확보와 하천수질 개선이 필요한 특정 지역 또는 다양한 유형의 공사 지구 내 하천이 정상적인 기능을 수행할 수 있도록 적용 가능한 생태하천유량 확보 방안들과 수리해석 모델인 HEC-RAS(River Analysis System), 생태하천유량 산정 모델인 PHABSIM(Physical HABitat SIMulation)을 연계한 물리서식처 평가 모듈을 개발하고, 이를 기초로 가중치부여매트릭스 평가(국토해양부, 2006) 기법을 적용한 최적의 생태하천유량 확보 방안과 수질개선 방안을 제시해 줄 수 있는 의사결정지원 시스템을 구축 하고자 한다. 본 연구에서 개발된 최적의 생태하천유량 확보 방안 도출을 위한 의사결정지원 시스템의 활용으로 필요유량은 물론, 기준을 만족하는 수질의 확보가 절실히 요구되는 중 소규모 하천에 실질적으로 적정수질의 생태하천유량을 확보함으로서 하천으로서의 역할을 위한 본 기능의 회복과 동시에 소하천, 도심하천 및 인공하천 등 중 소규모 수계의 수문순환을 정상화하여 하천의 지속 가능한 개발과 관리가 효율적으로 이루어지도록 하는데 이용될 수 있을 것으로 예상되어진다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.1
• /
• pp.35-42
• /
• 2013

This paper shows the positivistic approach for analyzing the effect of ICT on the reduction of greenhouse gas (GHG) emission. The real-time navigation was selected for the ICT based service in this research, and the CO2 reduction ratios of the optimized routes in the navigation were compared with the reduction ratios of the shortest routes in existing navigations. The results of experiments showed the driving based on the optimized routes has more reduction effects than the driving on the basis of the shortest routes. Also, new evaluation method for GHG emission was suggested by the quantification and monitoring approaches on the basis of the Clean Development Mechanism (CDM) in this paper. The results of this paper can be used as a preliminary research for the effect of ICT on the reduction of GHG emission. The evaluation method which suggested in this paper will be suggested to CDM as the new standard for the reduction of GHG emission in the transportation field as well.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.7
• /
• pp.1032-1038
• /
• 2003

The two-level full factorial and mixture design were used to screen ingredient type and to investigate the effects of ingredients on properties of surimi gel from jack mackerel using measurements of breaking forces, deformation values and color. The addition of starch decreased breaking force significantly (p<0.05), but did not affect deformation. The bovine plasma protein (BPP) among non-muscle proteins increased a breaking force and deformation value. However, the dried egg white increased slightly a breaking force, and decreased greatly a deformation value. The breaking force of gel was increased, but deformation value did not change significantly (p<0.05) with adding BPP. The whiteness of gel was slightly improved with the addition of corn starch and BPP. At 78% moisture, the optimum ratios of ingredients were 89.5∼90.0% for alkali surimi, 4.6∼6.0% for corn starch and 4.3∼5.4% for BPP to obtain above 110g for a breaking force, 4.2 mm for a deformation, and 22.5 for a whiteness.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.251-259
• /
• 1990

Asp. usumii IAM 2185 was selected as a strain producing the powerful raw starch digesting glucoamylase. The optimum initial pH, the optimum temperature and the optimum cultural time for the enzyme production on wheat bran medium were pH 6-8,25-$30^{\circ}C$ and 72 hrs, respectively. The addition of ammonium nitrate and albumin on wheat bran medium, respectively, increase slightly the enzyme production. The enzyme was purified by ammonium sulfate fractionation, CM-cellulose and DEAE-cellulose column chromatography. The specific activity of the purified enzyme was 34.3 U/mg protein and the yield of enzyme activity was 10.3%. The purified enzyme showed a single band on polyacrylamide disc gel electrophoresis and its molecular weight was estimated to be 67,000 by SDS polyacrylamide disc gel electrophoresis. The isoelectric point for the purified enzyme was pR 3.7. The optimum temperature and optimum pH were $60^{\circ}C$and pH 3.0 and the purified enzyme was stable in the pH range of 1.0-11.0. The purified enzyme was stable below $50^{\circ}C$ and its thermostability was greatly increased by the addition of $Ca^{2+}$. The purified enzyme showed a high hydrolysis rate on various raw starches such as corn, rice, yam, arrow root, sweet potato and glutinous rice.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.10
• /
• pp.1279-1289
• /
• 2013

In recent times, turbomolecular pumps (TMPs) have been used frequently to generate and maintain high and clean vacuum. Because of the high-speed rotation of the rotor, its structural safety should be treated as the first design concern. This paper presents the structural analysis and optimization of rotor blades of a TMP. To increase the numerical efficiency in the finite element modeling and analysis, the P-method provided in Pro/ENGINEER was used for simulation. The structural responses for several types of rotor blades were investigated, and the effects of the blade angle, blade length, and round size are thoroughly studied for each type of TMP blade. In addition, structural optimization to reduce and even the maximum stress at each stage of the TMP by changing the size of rounds between the blade and the hub was performed very successfully by using the P-method.

• Journal of Life Science
• /
• v.24 no.4
• /
• pp.428-436
• /
• 2014

Loop-mediated isothermal amplification (LAMP) technique relies on autocycling strand displacement DNA sysnthesis without template denaturation steps under isothermal conditions. LAMP has more advantages than modern PCR, as it requires only basic laboratory equipment like an isothermal water bath, oven, and heating cabinet. Hence, in this study, five random primers were designed with Streptococcus parauberis, shikimate kinase Arok gene sequences (Genbank accession number: CP0024711). Two primers were selected based on the ladder pattern. Other optimum reaction conditions like temperature, time, and sensitivity were established and confirmed with conventional SYBR-green PCR. Results confirmed that the designed random primers were species specific, without any non-target DNA amplification under isothermal conditions. Hence, this study suggests that LAMP techniques could be used in the diagnosis of fish pathogen, specifically S. parauberis.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.509-515
• /
• 1997

Crude papain was extracted from papaya latex under various conditions. Extraction conditions of crude papain were optimized by the response surface methodology (RSM). Extraction yield of papain was affected by concentration of $NaHSO_3$, extraction time and pH. Three independent factors were chosen to determine their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, which measures the linear, quadratic and interaction effects. According to the results of RSM, the stationary point for quantitatively dependent variable was found to be the maximum point for extraction yield. Optimum conditions of papain extraction were 4% of $NaHSO_3$, 120 min of extraction time and pH 7.6. Under these conditions, 793.16 mg of papain per g latex was extracted from papaya latex.