• Title/Summary/Keyword: 최적비용

Search Result 2,055, Processing Time 0.029 seconds

Multi-hop Routing Protocol based on Neighbor Conditions in Multichannel Ad-hoc Cognitive Radio Networks (인지 무선 애드혹 네트워크에서의 주변 상황을 고려한 협력적 멀티홉 라우팅 방법)

  • Park, Goon-Woo;Choi, Jae-Kark;Yoo, Sang-Jo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.4A
    • /
    • pp.369-379
    • /
    • 2011
  • During the routing process between nodes on the CR(Cognitive Radio) network conducting for efficient use of limited frequency resources, spectrum handover process due to the appearance of the PU occupies most of the routing latency, and also decreases the reliability of the path. In this paper, a cooperative routing protocol in a multi-channel environment is proposed. The source node broadcasts a message with available channel lists and probability of PU appearance during its route guidance. The intermediate nodes re-transmit the message, received from the source node, and update and maintain the information, status table of the path. The destination node determines the optimal path and sends a reply message to the selected path after it receives the messages from the intermediate nodes. The average probability of the PU appearance and the average time of the PU appearance are updated while transferring data. During data transmission the channel with the lowest probability of appearance of the PU is selected dynamically and if a PU appears on the current channel partial repairment is performed. It is examined that reliability of the selected path considerably is improved and the routing cost is reduced significantly compared to traditional routing methods.

The Electrochemical Studies of Non-enzymatic Glucose Sensor on the Nickel Nanoparticle-deposited ITO Electrode (ITO 전극 위에 고정된 니켈 나노 입자를 이용한 무효소 혈당센서에 관한 전기화학적인 연구)

  • Oh, In-Don;Kim, Samantha;Choi, Young-Bong
    • Journal of the Korean Electrochemical Society
    • /
    • v.17 no.3
    • /
    • pp.164-171
    • /
    • 2014
  • A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

New Method to Calculate Cost of Capital for Telecommunication Market (통신시장의 투자보수율 산정 개선방안)

  • Kim, Chang-Soo;Chon, Mi-Lim
    • Journal of Digital Convergence
    • /
    • v.10 no.4
    • /
    • pp.181-190
    • /
    • 2012
  • Cost of capital is one of the key factors of accounting regulation policy for telecommunication market. This paper aims at investigating efficient policy improvements concerning accounting regulation for telecommunication market focused on cost of capital calculation methods and its application. At First, cost of capital estimating method should be improved. In estimating the cost of equity capital, it is necessary to use benchmark method for Equity risk premium. It will reduce analytical errors caused by a rapid economic change and inflation. It is also more desirable to use debt premium adding method for the cost of debt capital. Optimal capital structure method may be considered a better way to estimates capital structure. Secondly, cost of capital estimating process also has to be reformed. Telecommunication industry changes rapidly so it does not reflect fast environmental changes. Therefore, cost of capital should be calculated every year. Cost of capital should be calculated by individual companies. There is information asymmetry between regulators and regulatees. Because of that cost of capital calculating process takes long time and cost a lot. To solve this problem, regulator should legislate on cost of capital calculation and then regulating companies report the calculating result. Lastly, major telecommunication companies are all listed now and it is possible to calculating it separately. We must continuously improve the estimating method and application of cost of capital and due to the fast growing of telecommunication industry. The process of determining the calculating method must be discussed and best method chosen.

Quality of White Pan Bread as Affected by Various Concentrations of Corni fructus Powder (산수유 분말의 첨가 농도에 따른 식빵의 품질 변화)

  • Shin, Ji-Woong;Shin, Gil-Man
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.18 no.6
    • /
    • pp.1007-1013
    • /
    • 2008
  • This study was conducted to investigate change in the quality of white pan bread as affected by various concentrations of Corni fructus powder. Breads were prepared by addition of 0, 1, 2 and 3% of Corni fructus to wheat flour of basic formulation. The moisture content of white pan bread was approximately $37.5{\sim}41.1%$ and decreased with increasing Corni fructus powder concentration. The pH of white pan bread also decreased with increasing Corni fructus powder concentration. In color values, with increase of Corni fructus powder concentration, L, a value decreased and a value increased in the crumb. The weights of bread cooled for 0, 1 hour and 3 hour after baking decreased with increasing Corni fructus powder concentration. The volume and height of dough increased with increasing Corni fructus powder concentration. However, no significant differences in the specific volume and yield of dough were found. The baking loss rate was higher in the breads with Corni fructus powder than in the control. In the texture characteristics, hardness, gumminess and chewiness of bread significantly decreased with increasing Corni fructus powder concentration and adhesiveness, cohesiveness increased. In the sensory evaluation, when compared to the control, the bread added to 1% of Corni fructus powder was superior texture and taste and flavor, while was similar to color.

  • PDF

Performance Enhancement Study of a Final Clarifier by the Optimum Design of Inlet and Baffle Condition (유입구 및 정류벽 최적설계에 의한 최종 침전지 성능 개선 연구)

  • Kim, Hey-Suk;Shin, Mi-Soo;Jang, Dong-Soon;Jung, Sung-Hee;Gang, Dong-Hyo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.2
    • /
    • pp.177-183
    • /
    • 2005
  • The effluent quality is directly affected by the separation of biological solids in a final clarifier because the majority of discharged $BOD_5$ and SS are virtually dependent on the results of biological solids in the sedimentation tank effluent. If a final clarifier is effectively designed and operated, the desired goal of clarification for wastewater can be achieved together with the cost reduction in the treatment of wastewater. To this end flow characteristics and the removal efficiency of SS are numerically investigated especially by the change of the inlet position and the installation of baffle to improve the performance of a rectangular final clarifier. The 2-D computer program developed in a rectangular coordinates has been successfully validated against experimental residence time distribution(RTD) curves obtained by tracing radio-isotope. The lowering of the inlet position weakens the density current and induces the settling of SS in the front zone of a clarifier. Thus the decreased traveling distance of the sludge increases the removal efficiency of SS in the effluent. The inlet baffle installed in the front region of clarifier prevents the short circuiting flow and induces to flow into the dense underflow, which eventually improves the effluent quality. In the case of lower inlet position, however, installation of baffle results in degradation of effluent quality. Consequently it is strongly recommended that in-depth numerical study be performed in advance for optimizing a clarifier design and retrofitting to improve effluent quality in a final clarifier.

Application of DNA microarry : Comparative functional genomic approach

  • Chu In-Sun
    • Proceedings of the Korean Society for Bioinformatics Conference
    • /
    • 2006.02a
    • /
    • pp.109-114
    • /
    • 2006
  • 최근 Human 지놈 프로젝트를 포함한 다양한 종의 지놈 프로젝트가 수행되고 수많은 지놈정보가 생산되고 있으며 이를 해석하고 서로 연관성를 찾기 위한 다양한 연구가 진행되고 있다. 즉 최신 생명공학과 관련된 연구방향이 DNA의 구조적 해석에서 기능 해석과 유전자들의 상호연관성을 규명하는 방향으로 변화하고 있으며 이를 위한 강력한 도구로서 DNA microarray (DNA chip)는 방대한 양의 지놈 정보를 이용하여 단시간에 대량으로 고속처리하여 효율적으로 유전자 기능을 분석할 수 있는 주목받고 있는 방법이다. DNA microarray 실험과 분석에 있어 데이터분석, 재현성, 종간의 비교, 확인실험 및 비용 등의 문제가 있지만 유전자발현양상 데이터로부터 정확한 환자의 예후를 예측할 수 있는 비교적 적은 유전자 그룹의 진단마커를 찾거나, 하나의 유전자가 아니라 mouse 전체 지놈의 유전자발현 패턴을 인간의 암을 위시한 각종 질병 연구를 위한 발현 신호나 변화 등을 발견하여 신약개발 등에 활용하고자 하는 시도가 활발히 진행되고 있다. 서로 다른 종간에 비슷한 phenotype의 유전자발현도 진화적으로 보존되었다는 전제 하에서 지놈 sequence의 비교연구가 가능하고 DNA microarray 발현 데이터에 근거하여 독립적으로 각 종간의 유전자발현패턴을 비교함으로써 난치병 등을 새롭게 분류할 수 있다. 즉, 암세포 등에서 유전자발현 양상은 유전학적, 환경적 alteration들이 잘 반영되어 있다고 간주하고, 이러한 양상을 바탕으로 인간의 암을 위시한 다양한 질병 연구를 위한 최적의 mouse 모델을 찾을 수 있고, 이는 결국 새로운 치료 방법 개발이나 맞춤의학 실현에 중요한 역할을 할 것으로 기대된다. 특히 pathway 타겟으로 하는 치료를 위해서는 Human-mouse 비교를 통한 발현 신호를 찾는 것이 진단에서는 매우 유용한 방법이다. 이를 위한 고성능의 분석방법이나 시스템의 개발이 중요하게 된다.. 관류의 정도와 조영증강정도를 중심으로 관류 MR 영상소견과 조직학적 소견을 관련지어 분석하였다. 결과: 조영증강 T1강조MR영상에서 환상조영증강을 보이는 다형성 교보세포종 2예에서는 변연부 외륜이 고관류를, 중심부의 괴사부위는 저관류로 나타났다. 저등급 교종은 경계가 불분명한 저관류부위로 보였다. 뇌농양 2예는 변연부 외륜이 경도의 고관류를, 중심부는 저관류로 나타났다. 뇌수막종은 미만성의 균일한 중등도 혹은 고도의 고관류로 보였으며, 임파종과 배아종은 경계가 명확한 저관류부위로 나타났다. 신경세포종은 종괴\ulcorner 일부에 중등도 혹은 고도의 고관류부위가 관찰되었고, 전이암은 다수병변중 일부에서 중등도의 고관류를 보였다. 방사선괴사는 저관류부위내에 국소적 고관류부위를 보였다. 결론: 관류 MR영상은 뇌종양의 관류상태를 비교적 잘 반영하며, 조직학적 특성을 예측하는데에 도움을 주 수 있을 것으로 기대된다. 뇌종야에서의 관류MR영상의 분명한 역할을 규명하기 위해서는 앞으로 더 많은 임상적 연구가 필요할 것으로 생각된다.조증 환자의 자극성 전타액내 lactobacilli양은 peroxidase system을 함유한 세치제를 사용한 군에서 대조군에 비해 상대적으로 낮게 나타났으나(p = 0.067) 통계학적 유의성은 없었다.같은 예에서 찾아 볼 수 있다. 첫째, 발음상으로 동사의 변화형에서 "porte[$p{\jmath}rte$](들다: 현재형), porte[$p{\jmath}rte$](과거분사형), porta[$p{\jmath}rte$](단순과거형)"등이 대립되며, 이휘 "Porto[$p{\jmath}rte$](포르토)"와도 대립된다. 둘째, 어휘적 대립 "le haut[$l{\partial}o$](위)/l'eau[lo](물)"와 형태론적 대립 "le[$l{\partial}$](정관사, 남성단수)/l

  • PDF

Characterization and synthesis of aqueous pink-red ceramic ink for digital inkjet printing (잉크젯 프린팅용 pink-red 수계 무기잉크의 제조 및 특성평가)

  • Lee, Won-Jun;Hwang, Hae-Jin;Han, Kyu-Sung;Cho, Woo-Suk;Kim, Jin-Ho
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.25 no.1
    • /
    • pp.20-26
    • /
    • 2015
  • Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.

(A Study on the Control Mechanism for Network Survivability in OVPN over IP/GMPLS over DWDM) (DWDM기반의 OVPN에서 네트워크 생존성을 위한 제어 메커니즘 연구)

  • Cho Kwang-Hyun;Jeong Chang-Hyun;Hong Kyung-Dong;Kim Sung-Un
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.42 no.9 s.339
    • /
    • pp.85-96
    • /
    • 2005
  • A ' Virtual Private Network (YPN) over Internet' has the benefits of being cost-effective and flexible. However, given the increasing demands for high bandwidth Internet and for reliable services in a 'VPN over Intemet,' an IP/GMPLS over DWDM backbone network is regarded as a very favorable approach for the future 'Optical VPN (OVPN)' due to the benefits of transparency and high data rate. Nevertheless, OVPN still has survivability issues such that a temporary fault can lose a large amount of data in seconds, moreover unauthorized physical attack can also be made on purpose to eavesdrop the network through physical components. Also, logical attacks can manipulate or stop the operation of GMPLS control messages and menace the network survivability of OVPN. Thus, network survivability in OVPN (i.e. fault/attack tolerant recovery mechanism considering physical structure and optical components, and secured transmission of GMPLS control messages) is rising as a critical issue. In this Paper, we propose a new path establishment scheme under shared risk link group (SRLG) constraint for physical network survivability. And we also suggest a new logical survivability management mechanism by extending resource reservation protocol-traffic engineering extension (RSVP-TE+) and link management protocol (LMP). Finally, according to the results of our simulation, the proposed algorithms are revealed more effective in the view point of survivability.

Development of Learning Algorithm using Brain Modeling of Hippocampus for Face Recognition (얼굴인식을 위한 해마의 뇌모델링 학습 알고리즘 개발)

  • Oh, Sun-Moon;Kang, Dae-Seong
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.42 no.5 s.305
    • /
    • pp.55-62
    • /
    • 2005
  • In this paper, we propose the face recognition system using HNMA(Hippocampal Neuron Modeling Algorithm) which can remodel the cerebral cortex and hippocampal neuron as a principle of a man's brain in engineering, then it can learn the feature-vector of the face images very fast and construct the optimized feature each image. The system is composed of two parts. One is feature-extraction and the other is teaming and recognition. In the feature extraction part, it can construct good-classified features applying PCA(Principal Component Analysis) and LDA(Linear Discriminants Analysis) in order. In the learning part, it cm table the features of the image data which are inputted according to the order of hippocampal neuron structure to reaction-pattern according to the adjustment of a good impression in the dentate gyrus region and remove the noise through the associate memory in the CA3 region. In the CA1 region receiving the information of the CA3, it can make long-term memory learned by neuron. Experiments confirm the each recognition rate, that are face changes, pose changes and low quality image. The experimental results show that we can compare a feature extraction and learning method proposed in this paper of any other methods, and we can confirm that the proposed method is superior to existing methods.

Robust determination of control parameters in K chart with respect to data structures (데이터 구조에 강건한 K 관리도의 관리 모수 결정)

  • Park, Ingkeun;Lee, Sungim
    • Journal of the Korean Data and Information Science Society
    • /
    • v.26 no.6
    • /
    • pp.1353-1366
    • /
    • 2015
  • These days Shewhart control chart for evaluating stability of the process is widely used in various field. But it must follow strict assumption of distribution. In real-life problems, this assumption is often violated when many quality characteristics follow non-normal distribution. Moreover, it is more serious in multivariate quality characteristics. To overcome this problem, many researchers have studied the non-parametric control charts. Recently, SVDD (Support Vector Data Description) control chart based on RBF (Radial Basis Function) Kernel, which is called K-chart, determines description of data region on in-control process and is used in various field. But it is important to select kernel parameter or etc. in order to apply the K-chart and they must be predetermined. For this, many researchers use grid search for optimizing parameters. But it has some problems such as selecting search range, calculating cost and time, etc. In this paper, we research the efficiency of selecting parameter regions as data structure vary via simulation study and propose a new method for determining parameters so that it can be easily used and discuss a robust choice of parameters for various data structures. In addition, we apply it on the real example and evaluate its performance.