• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.399-400
• /
• 2018

인덕션 히터(Induction Heater)는 PTC 히터의 비해 빠른 온도 상승 효과를 가지고 있다. 인덕션 히터는 LC공진 회로로 구성된다. 커패시터의 정전 용량은 가격과 중량에 비례한다. 따라서 인덕턴스를 향상시켜서 정전용량을 줄여야 한다. 인덕턴스 향상을 위해 인덕션 히터의 구조를 변경하고 다구찌 기법과 유한요소법(FEM:Finite Element Method) 시뮬레이션을 통해 최적화 모델을 도출한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.182-190
• /
• 1997

Recently to develope an automobile with better properties, much researches and investments are executed in many countries. In this paper, it is intended to minimize the weight of an engine block without changing the dynamic characteristics. The weight minimization is executed by the sensitivity of the natural frequency of the engine block. To decrease the engine weight, much less thickness than the original thickness of the engine is selected to initial value and the structure modification is performed to recover the dynamic characteristics of the engine. Here, the original thickness of the engine is 8mm and the initial thickness is selected to 5mm, 6mm and the number if the natural frequencies fitted are 2, 6, 7, respectively. As the results, it is found that; (1) the weight of each case could be reduced without changing the objective natural frequencies. Specially, in the case of fitting 2 natural frequencies with 5mm initial thickness the weight could be reduced to 4.21kg(23.3% for engine weight). (2) according to the driving frequency range of engine, the weight minimization could be performed choicely, (3) improving a vibration characteristics of a orignal structure, the weight minimization could be performed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.171-176
• /
• 2021

This paper deals with bid evaluation problem that chooses the vendors and quantity with minimum purchasing cost for bid information of setup cost and unit price. For this problem, the branch-and-bound(BB) and branch-and-cut(BC) methods are well-known. But these methods can be fail to obtain the optimal solution. This paper gets the initial feasible solution with procuring quantity assignment principle in accordance with the unit price or setup cost rank-first. Then procuring quantity moving optimization(vendor change) is execute take account of unit price or setup cost rank. As a result of experimentation, the propose algorithm is significantly lower compared to BB and BC.

• Applied Chemistry for Engineering
• /
• v.17 no.3
• /
• pp.317-320
• /
• 2006

The optimum mobile phase condition for analysis of the six purine derivatives (caffeine, guanine, hypoxanthine, purine, theobromine, and theophylline) were determined by a HCI program. Reversed-phase HPLC system was used with the binary mobile phase, water and methanol. Three retention models (Snyder, Langmuir, and Binary polynomial) were considered to predict the retention factors. The elution profiles were calculated by the plate theory based on the binary polynomial retention model. From the final calculated results, the binary polynomial retention model showed the best agreements between the calculated and experimental data. In the isocratic mode, the optimum mobile phase composition of water/methanol is 93/7(v/v). However, we used step-gradient mode to decrease the run-time ($1^{st}$ mobile phase : water/methanol = 93/7 (v/v), gradient time : 5 min, $2^{nd}$ mobile phase : water/methanol = 75/25 (v/v)). The experimental and simulated profiles of above the two conditions show a good agreement.

• Analytical Science and Technology
• /
• v.37 no.3
• /
• pp.143-154
• /
• 2024

In this study, we improved the vitamin C test method and reviewed data on the adjustable range of chromatography conditions for quantification. First, we adjusted the mobile phase conditions such as solvent composition, salt concentration, pH and column temperature and in particular, it was confirmed through an improved test method that the peak derived from the buffer solution could be clearly separated from the target component, vitamin C by adjusting the pH. The retention time of vitamin C was partially changed by adjusting the column diameter, length and particle size but the number of theoretical plates indicated similar values and did not affect the separation and quantitative analysis of the target component. The flow rate according to the column specifications was derived from the equation proposed by the U.S. FDA (Food and Drug administration) and the Korean MFDS (Ministry of Food and Drug Safety), and evaluation of the applicability to vitamin complexes showed high selectivity for vitamin C even with altered stationary phase conditions and flow rates. In conclusion, vitamin C can be optimally separated and detected by changing the chromatographic method conditions and it was confirmed that the mobile and stationary phase conditions of liquid chromatography can be slightly adjusted in case the assay method uses an isocratic elution.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.141-144
• /
• 2004

기존 광원은 그 배광이 광원을 중심으로 볼 때 사방으로 퍼져 나가며, 이를 이용해 적절한 형태로 바꾸는 것은 주로 반사판의 역할이다. 그러나 LED는 기본적으로 배광이 좁으며, 이를 적절하게 변경시키는 것은 반사판이 아니라 굴절과 확산이 된다. 또한 LED는 그 자체만으로 크기가 작아 점광원으로 볼 수 있지만, LED에서 발광하는 빛은 chip에서 epoxy dome으로 직접 굴절되어 나가는 refracted ray와 reflector cup에 의해 반사되어 다시 epoxy dome에서 굴절되어 나가는 reflected-refracted ray로 이루어지기 때문에 정확히 말하면, 빛은 한 점에서 발광한다고 간주 할 수는 없다. 따라서 본 논문에서는 LED에 대한 최적의 refractor 설계를 위해 점광원으로 간주 할 수 있는 최적의 근사 발광점을 선택하여 refractor를 설계하고자 한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.10b
• /
• pp.51-58
• /
• 2000

The purpose of this study is the optimum modification of dynamic characteristics of stiffened plate structure. In the method of the optimization ,finite element method (FEM), sensitivity analysis and optimum structural modification method are used. To begin with, using FEM, the dynamic characteristics of stiffened plate structure is analyzed. Next, rate of change of dynamic characteristic by the change of design variable is calculated using the sensitivity analysis. Then, amount of change of design variable is calculated using this sensitivity value and optimum structural modification method. The change of natural frequency is made to be an objective function. Thickness of plate and cross section moment become a design variable. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate structure.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.1-3
• /
• 1996

수중 트랜스듀서는 진동하는 물체위에 설치되어 다양한 외부 소음원이 유입되는 환경에 노출되어 있다. 외부 소음원으로는 선체 진동. 프로펠러 소음, 그리고 유동 유기 소음들을 들 수 있고, 트랜스듀서의 실제 작동시 이들의 레벨이 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 논문에서는 외부 소음원에 무관한 고 정밀, 저 소음 특성을 지닌 음향센서를 개발하기 위하여 유한요소법 (FEN)을 사용하여 소음 전달 특성을 분석하고, air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 구조를 개선한 음향센서의 설계 및 내소음성 평가를 하였다. 또한 사용한 음향 감쇠층의 최적 물성을 제시하고자 한다. 그 결과 센서 측면 하단부에 소음원이 위치할 경우 가장 큰 잡음 신호로 작용하며, 구조를 변경한 결과 기존 음향센서에 비해 55% 이상 내 소음성을 증진 시켰다. 그리고 음향 감쇠층의 최적 음향 임피던슨는 1 Mrayl 이하 혹은 4mrayl 이상으로 분석되었다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.963-965
• /
• 2005

본 연구는 대용량 추진용 32극, 192슬롯의 3MW급의 BLDC(Brushless DC) 전동기를 모델로 2차인 유한요소법(FEM)을 이용 전자계 및 열계 특성을 해석한 것이다. 이러한 해석을 통하여 BLDC 전통기의 진동 및 소음의 원인을 분석하고 성능향상을 위한 방법을 연구하며 이에 전동기의 소음 및 진동의 저감과 성능을 향상시킬 수 있는 최적설계에 그 목적이 있다. 또한 FEM을 이용 열계 특성을 해석하고 이를 분석하여 설계정수 변경에 반영한다. 위의 결과들을 설계에 적용하여 BLDC의 성능향상을 위한 최적설계 모델을 제시하게 될 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1266-1272
• /
• 2001

This paper discusses the multi-level optimization method in dynamic optimization problems, through stiffened plate of ship structures. In structural optimization, the computational cost increases rapidly as the number of design variables increases. And we need a great amount of calculation and time on problems of modified dynamic characteristics of large and complicated structures. In this paper, the multi-level optimization is proposed, which decreases computational time and cost. The dynamic optimum designs of stiffened plate that control the natural frequency and minimize weight subjected to constraints condition are derived. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate.