• Title/Summary/Keyword: 최적기준법

Search Result 391, Processing Time 0.032 seconds

Optimization of an Annular Fin with a Pipe of Variable Inner Radius for Fixed Fin Volume (고정된 휜 체적에 기준한 원관 내부반경이 변하는 환형 휜의 최적화)

  • Kang, Hyung-Suk
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.3
    • /
    • pp.229-235
    • /
    • 2010
  • Optimum values of fin performance and dimensions for an annular fin with a rectangular profile and a pipe with variable inner radius are determined by using a variable separation method. The range of ambient convection characteristic number that results in optimum heat loss is listed. The optimum heat loss, corresponding optimum fin effectiveness, fin length, and fin height are presented as a function of the inner radius of the pipe, inner fluid convection characteristic number, fin volume, and ambient convection characteristic number. One of the results shows that the optimum heat loss, fin effectiveness and fin length increase linearly with the inner radius of the pipe when both the fin volume and fin-base radius are fixed.

Self-Optimizing Structural Design of a Pre-engineered Building System with Nonprismatic Members based on AISC2005 (AISC2005에 기준한 변단면 선설계 건축물시스템의 자동화 최적구조설계)

  • Kim, Yong Seok;Oh, Myoung Ho;Song, Byung Kyu
    • Journal of Korean Society of Steel Construction
    • /
    • v.21 no.2
    • /
    • pp.193-201
    • /
    • 2009
  • Structural design of most nonprismatic Pre-Engineered Building Systems (PEBS) is performed using optimizing software developed in foreign countries. In this study, a structural optimizing software for the design of 3-D structures of nonprismatic PEBS is developed according to the allowable stress design method of AISC2005 and KBC. Optimizing structural design with nonprismatic members is carried out by repeating the process of structural analysis and member design to minimize the weight of a structure. According to the optimizing design results of 2-D and 3-D structures with nonprismatic members, there are considerable steel savings in designing structures with nonprismatic H-shaped built-up sections rather than with H-shaped rolled sections. When H-shaped built-up sections were used, the weight of the structural steel was reduced when AISC2005 specification rather than AISC1898 was used in the design. It is therefore concluded that utilizing the new AISC2005 specification is safer in preventingweb buckling because the height of a member is designed to be small despite some differences depending on the structural type.

(Adaptive Structure of Modular Wavelet Neural Network Using Growing and Pruning Algorithm) (성장과 소거 알고리즘을 이용한 모듈화된 웨이블렛 신경망의 적응구조 설계)

  • Seo, Jae-Yong;Kim, Yong-Taek;Jo, Hyeon-Chan;Jeon, Hong-Tae
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.39 no.1
    • /
    • pp.16-23
    • /
    • 2002
  • In this paper, we propose the growing and pruning algorithm to design the optimal structure of modular wavelet neural network(MWNN) with F-projection and geometric growing criterion. Geometric growing criterion consists of estimated error criterion considering local error and angle criterion which attempts to assign wavelet function that is nearly orthogonal to all other existing wavelet functions. These criteria provide a methodology which a network designer can construct MWNN according to one's intention. The proposed growing algorithm increases in number of module or the size of modules of MWNN. Also, the pruning algorithm eliminates unnecessary node of module or module from constructed MWNN to overcome the problem due to localized characteristic of wavelet neural network which is used to modules of MWNN. We apply the proposed constructing algorithm of the optimal structure of MWNN to approximation problems of 1-D function and 2-D function, and evaluate the effectiveness of the proposed algorithm.

A Study on Determining the Prediction Models for Predicting Stock Price Movement (주가 운동양태 예측을 위한 예측 모델결정에 관한 연구)

  • Jeon Jin-Ho;Cho Young-Hee;Lee Gye-Sung
    • The Journal of the Korea Contents Association
    • /
    • v.6 no.6
    • /
    • pp.26-32
    • /
    • 2006
  • Predictions on stock prices have been a hot issue in stock market as people get more interested in stock investments. Assuming that the stock price is moving by a trend in a specific pattern, we believe that a model can be derived from past data to describe the change of the price. The best model can help predict the future stock price. In this paper, our model derivation is based on automata over temporal data to which the model is explicable. We use Bayesian Information Criterion(BIC) to determine the best number of states of the model. We confirm the validity of Bayesian Information Criterion and apply it to building models over stock price indices. The model derived for predicting daily stock price are compared with real price. The comparisons show the predictions have been found to be successful over the data sets we chose.

  • PDF

Weight setting of major environmental assessment items using Analytical Hierarchy Process - Case for the selection of railroad route - (계층분석법을 통한 환경영향평가 중점항목의 가중치 설정 - 철도사업 노선선정을 대상으로 -)

  • Lee, Minjoo;Kim, Minkyung;Lee, Sangdon
    • Journal of Environmental Impact Assessment
    • /
    • v.23 no.6
    • /
    • pp.517-526
    • /
    • 2014
  • This paper performed studies on a guide for an environmental assessment necessary to select railroad route optimally, and presented techniques for an environmental friendly route selection using AHP(Analytical Hierarchy Process) as an objective method. The AHP is an approach to decision making that involves multiple choice criteria into a hierarchy and assessing the relative importance of each criterion, and determining an overall ranking of the alternatives. For the purpose of this study, we established the weight and the order of major environmental assessment items based on the survey of experts. The results of the weight by AHP were in order of Fauna & Flora, Topography & Geology, Nature Environmental Assets, Noise & Vibration, Water Quality, Landscape and Air Quality indicating natural environment should be in priority. To develop the more efficient environmental friendly route selection systems, it is necessary to consider economical, technical, and social aspects in addition to environmental consideration.

Optimum Abrasing Condition for Recycled Fine Aggregate Produced by Low Speed Wet Abraser Using Sulfur (황산수를 사용한 저속 습식 마쇄법에 의한 순환잔골재의 최적 마쇄조건)

  • Kim, Jin-Man;Kim, Ha-Seog;Park, Sun-Gyu;Kim, Bong-Ju;Kwak, Eun-Gu
    • Journal of the Korea Concrete Institute
    • /
    • v.20 no.5
    • /
    • pp.557-563
    • /
    • 2008
  • Recently, the amount of disposed construction materials like demolished concrete is growing fast and the shortage of natural concrete aggregate is becoming serious. Therefore, recycling of aggregate extracted from the demolished concrete is getting important and use of the recycled aggregate for concrete has been seriously considered. However, the use of the recycled aggregate even for low performance concrete is very limited because recycled aggregate which contains large amount of old mortar has very low quality. Therefore, removing the paste sticked to the recycled aggregate is very important in the manufacturing of high quality recycled aggregate. We have studied a series of research according to complex crushing method, which is removed the ingredient of cement paste from recycled fine aggregate using both the low speed wet abrasion crusher as mechanical process and the acid treatment as chemical processes. This paper is to analyze the quality of the recycled fine aggregate produced by those complex method and investigate optimum manufacturing condition for recycled fine aggregate by the design of experiments. The experimental parameters considered are water ratio, coase aggregate ratio, and abrasion time. As a result, data concerning the properties of recycled sand were obtained. It was found that high quality recycled fine aggregate could be to obtain at the condition of the fifteen minute of abrasion-crusher time and the over 1.0 of recycled coarse aggregate ratio.

Validation and Uncertainty Evaluation of an Optimized Analytical Method Using HPLC Applied to Canthaxanthin, a Food Colorant (식품 색소 Canthaxanthin의 HPLC 최적 분석법 확인 및 타당성과 측정불확도 평가)

  • Suh, Hee-Jae;Kim, Kyung-Su;Hong, Mi-Na;Lee, Chan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.45 no.3
    • /
    • pp.342-351
    • /
    • 2016
  • This study was carried out to develop an optimized analytical method using high-performance liquid chromatography (HPLC) applied to canthaxanthin, which is not yet designated as a food colorant in Korea, as well as to perform validation and uncertainty evaluation of this method. Official methods of AOAC, UK, and Japan with HPLC-UV detection were evaluated for the analysis of canthaxanthin by comparison of linearity, resolution, selectivity, limit of detection (LOD), limit of quantitation (LOQ), accuracy, precision, recovery, inter-laboratory tests, and uncertainty measurement. The calibration curves showed high linearity with an $R_2$ value of over 0.999 for canthaxanthin standard solutions in all three official methods. The official method of Japan exhibited the best results in terms of resolution and selectivity, including the lowest LOD and LOQ. The average coefficients of variation were calculated as less than five of three institutes with a precision value less than 1, accuracy near 100%, and recovery ratio between $100{\pm}10%$. The expanded uncertainty for canthaxanthin was estimated to be $39.5{\pm}5.29mg/kg$ (95% confidence level, k=2), and the uncertainty of measurement was 13.4%. In this study, official methods of canthaxanthin were compared and the validities verified. The results will be further applied to establish an authorized analytical method for canthaxanthin in Korea.

A Study on the Optimal Design of Laminate for CNG composite vessel using ANSYS RSM (ANSYS RSM을 이용한 CNG차량 용기 필라멘트 와인딩 적층판 최적설계에 관한 연구)

  • Kim, Eui-Soo
    • Journal of the Korean Institute of Gas
    • /
    • v.13 no.4
    • /
    • pp.15-21
    • /
    • 2009
  • The fiber reinforced composite material is widely used in the multi-industrial field where the weight reduction of the infrastructure is demanded because of their high specific modulus and specific strength. Pressure vessels using this composite material have two main merits which are to cut down energy by reducing weight and to have long-term life due to corrosion resistance. In this paper, we developed optimal design module of laminate for CNG composite pressure vessel winding E-glass/epoxy based on Von-Mises yield criterion, Tsai-Hill theory and stress ratio using finite element method and ANSYS RSM(Response Surface Method).

  • PDF

Accuracy analysis of SPOT Orbit Modeling Using Orbit-Attitude Models (궤도기반 센서모델을 이용한 SPOT 위성 궤도모델링 정확도 분석)

  • Kim, Hyun-Suk;Kim, Tae-Jung
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.14 no.4 s.38
    • /
    • pp.27-36
    • /
    • 2006
  • Conventionally, in order to get accurate geolocation of satellite images we need a set of ground control points with respect to individual scenes. In this paper, we tested the possibilities of modeling satellite orbits from individual scenes by establishing a sensor model for one scene and by applying the model, which was derived from the same orbital segment, to other scenes that has been acquired from the same orbital segment. We investigated orbit-attitude models with several interpolation methods and with various parameter sets to be adjusted. We used 7 satellite images of SPOT-3 with a length of 420km and ground control points acquired from GPS surveying. Results of the conventional individual scene modeling hardly introduced differences among different interpolation methods and different adjustment parameter sets. As the results of orbit modeling, the best model was the one with Lagrange interpolation for position/velocity and linear interpolation for attitude and with position/angle bias as parameter sets. The best model showed that it is possible to model orbital segments of 420km with ground control points measured within one scene (60km).

  • PDF

Improvement of GR4J Model Applying Soil Moisture Accounting Procedure (GR4J 모형을 이용한 토양수분계산절차의 개선)

  • Im, Sung-Soo;Yoo, Do-Guen;Lee, Ho-Min;Kim, Joong-Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.942-942
    • /
    • 2012
  • 강우-유출에 대한 수문해석에 있어 유효강우량 산정방법으로는 여러 가지가 있으나 국내외로 미농무부(United States Department of Agriculture)에서 제안한 NRCS-CN 방법이 널리 사용되고 있다. SCS-CN 방법은 1개의 매개변수만을 사용하여 방법이 간략하고 유역 토양특성의 반영이 가능하다는 장점이 있으나 공간적 규모에 따른 효과반영이 불가하고 초기손실우량비를 0.2로 고정하는 가정의 문제점 등이 있다. 많은 연구자들이 SCS-CN 방법의 문제점을 보완하고자 다양한 방법을 제시하였으며 특히 Michel 등(2005)은 토양수분계산가정(Soil Moisture Accounting Procedure)에서 유출기준저류고를 새로운 매개변수로 제안하여 초기손실우량비 가정의 불합리성을 개선하고 새로운 AMC 조건식을 산정하였다. 그러나 범용적인 AMC 조건식을 제안하고자 140개 유역에 적용한 결과를 통해 유출기준저류고는 토양의 최대잠재보유수량의 1/3으로 일괄 적용하는 문제점이 있으며, 민감도분석을 통해 전체 결과의 효율이 좋은 값으로 선정하였다. 이에 본 연구에서는 일 단위 집중형 장기유출모형인 GR4J(Ge'nie Rural a' 4 parame'tres Journalier)를 Michel이 제안한 모형을 적용하기 위해 선정하였으며 토양수분계산과정에서 새로운 매개변수인 유출기준저류고를 최적화기법인 화음탐색법을 적용하여 결정하였다. 적용대상은 국내의 달방댐, 횡성댐, 섬진강댐, 청주댐, 대청댐유역에 적용하였으며 본 연구에서 제안한 방법이 강우-유출 결과의 정확성을 향상시키는 것을 볼 수 있었다. 최종적으로 최적화된 유출기준저류고와 유역크기와의 상관성분석을 통하여 관계식을 도출하였다. 토양수분과정에 대한 고려는 유출량을 산정하는 데 있어서 정확성을 높이는 데 기여할 수 있으며 더불어 본 연구에서 제안한 관계식을 통하여 유출기준저류고와 유역특성과의 연관성을 확인할 수 있었다.

  • PDF