• Journal of KIISE:Software and Applications
• /
• v.32 no.5
• /
• pp.366-377
• /
• 2005

We find a module may that takes optimal correction rate of Korean spelling corrector. If there are a lot of module numbers of spelling corrector, it is difficult to calculate optimal correction rate of spelling corrector because permutation of N-modules is N!. This Korean spelling corrector consists of 19 modules. It is impossible to arrange 19 modules actually and the correction rate is various according to input data. We found the range of correction rate using parallel processing between modules and the optimal correction rate using sequential processing of modules. Input data that are used in an experiment is 753,191 eojeol's sets that happen in newspaper publishing company during several years. About this error set, theoretical maximum correction rate of spelling corrector is $97.28\%$ (732,764/753,191). But we got the optimal correction rate $96.62\%$ (727,750/733,191). This optimal correction rate is almost near to $99.31\%$ (727,750/732,764) of the maximum correction rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.789-796
• /
• 2012

To find the module sequence that makes correction rate optimal is the goal of this paper. The Hill-climbing algorithm was used in the experiment to analyze the performance of Korean Spelling Corrector. Given the wrong eojul set, We found the module sequence that shows correction rate of 96.41%. Because of the quite high correction rate, Hill-climbing is a practical method for our Spelling Corrector.

• Annual Conference on Human and Language Technology
• /
• 1997.10a
• /
• pp.175-182
• /
• 1997

지금까지의 한글 문자인식 후처리 연구분야에서 미등록어와 비문맥적 오류 문제는 아직까지 잘 해결하지 못하고 있는 문제이다. 본 논문에서는 단어로서 가능한지를 결정하는 기준으로 확률적 음절 결합 정보를 사용하여 형태소 분석 기법만을 사용했을 때 발생할 수 있는 미등록어 문제를 해결하고, 통사적 기능의 어말 어휘를 고려한 문맥 결합 정보를 이용함으로써 다수의 후보 어절 가운데에서 최적의 후보 어절을 선택하는 방법을 제안한다. 제안된 시스템은 인식기에서 내보낸 후보 음절과 학습된 혼동 음절을 조합하여 하나 이상의 후보 어절을 생성하는 모듈과 통계적 언어 정보를 이용하여 최적의 후보 어절을 선정하는 모듈로 구성되었다. 실험은 1000만 원시 코퍼스에서 추출한 음절 결합 정보와 17만 태깅된 코퍼스에서 추출한 어절 결합 정보를 사용하였으며, 실제 인식 결과에 적용한 결과 문자 단위에서는 94.1%의 인식률을 97.4%로, 어절 단위에서는 87.6%를 96.6%로 향상시켰다. 교정률과 오교정률은 각각 문자 단위에서 56%와 0.6%, 어절 단위에서 83.9%와 1.66%를 보였으며, 전체 실험 어절의 3.4%를 차지한 미등록어 중 87.5%를 올바로 인식하는 한편, 전체 오류의 20.3%인 비문맥 오류에 대해서 91.6%를 올바로 교정하는 후처리 성능을 보였다.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.309-317
• /
• 2010

The stainless steel wire is extensively used for the orthodontic treatment. But, the stainless steel wire that has commonly superior corrosion resistance has caused hypersensitive reaction or allergy as side effects because of corrosion in the oral environment. For improving the problem of corrosion, we was evaluated the suitability of the duplex stainless steel(DSS) as orthodontic wire through this study. The DSS wire was evaluated the mechanical strength and bio-stability for suitability and bio-compatibility as orthodontic wire. In this work, the DSS and stainless steel(SS) as common use of medical grade were prepared for the tensile strength test. The DSS wire were treated by heat. and Temperature conditions of the heat treatment were $28^{\circ}C$, $500^{\circ}C$, $600^{\circ}C$, $700^{\circ}C$, $800^{\circ}C$, $900^{\circ}C$, respectively. And the DSS wires that treated by heat on the optimum temperature condition were conducted the bending moment test and calculated the S-Max value and the modulus of elasticity. For evaluating the bio stability, each materials were conducted in vitro test for measuring the cell survival rate. The most interesting results was that the tensile strength test of SS wire($8.17\times10^4\;N/mm^2$) and DSS wire($8.05\times10^4\;N/mm^2$) that treated at $500^{\circ}C$ by heat were similar in mechanical strength. In the bio-stability study, the DSS has no cytotoxicity (p=0.05) Thus, we could make a conclusion that the duplex stainless steel wire has vastly superior corrosion resistance was suitable as orthodontic wire.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1430-1434
• /
• 2005

금강 유역과 같이 복잡한 하천유역 시스템의 관리를 위해서는 시스템 요소들을 통합적으로 분석할 수 있는 효과적인 의사결정지원 도구가 필요하다. K-MODSIM 모형은 단기 물관리, 장기 운영계획, 가뭄 대비계획 및 물관련 분쟁 해결을 위해 보다 개선된 유역관리 전략을 수립하기 위한 컴퓨터 기반 도구로 개발되었으며, 본 연구에서는 K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성한 후, 두 단계의 모형 검정을 수행하였다. 먼저 물리적 검정을 통해서 전체 대상 수계의 상하류 물수지를 검토하고, 다음 단계인 운영 측면의 검정에서 물리적으로 나타나는 상황이 댐 운영이나 제약 조건 등에 부합하는지의 여부를 검토하였다. 대청댐과 용담댐의 통합 운영을 위한 최적 운영률의 개발은 동적계획법 소프트웨어인 CSUDP를 이용하여 수행하였으며, 여기서 사유한 접근법은 음해 추계학적 동적계획법이다. 이 접근방법은 유입량 시계열을 추계학적으로 모의발생시키고, CSUDP 모형은 모의발생시킨 유입량 시계열에 대한 최적운영률을 찾기 위해 사용하며, CSUDP의 최적화 결과에 대한 통계적인 분석을 통해 월단위 운영률을 도출하였다. K-MODSIM 모형에 저수지 운영률을 반영하여 유역의 용수배분을 평가하였다. 유역 저수지군 운영 환경 및 제약조건을 반영한 네트워크를 구성하고, 대청댐과 용담댐의 통합 운영을 위한 최적연계 운영를을 개발하여 다음과 같은 운영 시나리오들을 개발하고 평가하였다. $\cdot$ 금강수계에 대한 용당댐의 영향 평가 $\cdot$ 댐 연계운영시 수요량 변화에 따른 영향 평가 $\cdot$ 하도추적을 고려한 일별모형의 검증 개발된 운영률과 하도추적방법을 K-MODSIM 모형에서 검증하기 위해서 vb.net 스크립트 파일을 개발하여 적용하였다.L이하로 이를 유등천 상류부에 공급할 경우 유등천의 수질은 BOD 6.7mg/L, TN 9.80mg/L, TP 0.90mg/L를 나타낼 것으로 예측된다. 고도처리시설의 도입 후 금강 합류점에서 갑천의 예측 BOD는 7.4mg/L로 현재 9.0mg/L에 비하여 개선되지만 이는 금강수계 오염총량 관리계획의 시$\cdot$도 경계지점 목표수질인 5.9mg/L를 만족시키지 못하므로, 이를 만족시키기 위해서는 방류수 BOD 7.2mg/L이하로 처리해야 할 것으로 판단된다.which support only concepts or image features.방하는 것이 선계기준에 적합한 것으로 나타났다. 밸브 개폐에 따른 수압 변화를 모의한 결과 밸브 개폐도를 적절히 유지하여 필요수량의 확보 및 누수방지대책에 활용할 수 있을 것으로 판단된다.8R(mm)(r^2=0.84)$로 지수적으로 증가하는 경향을 나타내었다. 유거수량은 토성별로 양토를 1.0으로 기준할 때 사양토가 0.86으로 가장 작았고, 식양토 1.09, 식토 1.15로 평가되어 침투수에 비해 토성별 차이가 크게 나타났다. 이는 토성이 세립질일 수록 유거수의 저항이 작기 때문으로 생각된다. 경사에 따라서는 경사도가 증가할수록 증가하였으며 $10\% 경사일 때를 기준으로 $Ro(mm)=Ro_{10}{\times}0.797{\times}e^{-0.021s(\%)}$로 나타났다.천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하게 인식하는 해방적 행동에 대한 목표를 강조하여 적용할 필요가 있음을 시사하고 있다.교하여 유의한 차이가 관찰되지 않았다. 또한 HSP 환자군에서도 $IL1RN^{*}2$ allele 빈도와

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.337-346
• /
• 2008

Objective: The purpose of this study was to determine whether an exogenous electric current to the alveolar bone surrounding a tooth being orthodontically treated can enhance tooth movement in human and to verify the effect of electric currents on tooth movement in a clinical aspect. Methods: This study was performed on 7 female orthodontic patients. The electric appliance was set in the maxilla to provide a direct electric current of $20{\mu}A$. The maxillary canine on one side was assigned as the experimental side, and the other as control. The experimental canine was provided with orthodontic force and electric current. The control side was given orthodontic force only. Electrical current was applied to experimental canines for 5 hours a day. The amount of canine movement was measured with an electronic caliper every week. Results: The amount of orthodontic tooth movement in the experimental side during 4 weeks was greater by 30% compared to that of the control side. The amount of increase in tooth movement in the experimental side was statistically significant. The amount of tooth movement in the experimental side during the first two weeks was !Bleater than that in the following two weeks. The amount of weekly tooth movement in the control side was decreased gradually. Conclusions: These results suggested that the exogenous electric current from the miniature electric device might accelerate orthodontic tooth movement by one third and have the potential to reduce orthodontic treatment duration.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.2
• /
• pp.77-83
• /
• 2003

To investigate the influence of the variation of conic coefficient of the front surface on the RMS SD(Root Mean Square Spot Diameter) in a back focal plane, we use programs which are Cove V and LOSA 2.0. We consider a spectacle lens with back vertex power of -4.00D, diameter of 70 mm, the front surface powers which are 2.00D, 4.00D, 6.00D, and 8.00D, and the indices which are $n_d$=1.498, 1.523, 1.586, and 1.660, respectively. The RMS SD in the back focal plane and the thickness of an aspherical tens having the optimized conic constant are smaller than those of a spherical lens. The RMS SD in the back focal plane decreases as the front surface power decreases. From these results, we determine the optimized conic constant to improve the optical image quality and decrease RMS SD in the back focal plane.

• Progress in Medical Physics
• /
• v.25 no.1
• /
• pp.37-45
• /
• 2014

The accuracy and uniformity of CT numbers are the main causes of radiation dose calculation error. Especially, for the dose calculation based on kV-Cone Beam Computed Tomography (CBCT) image, the scatter affecting the CT number is known to be quite different by the object sizes, densities, exposure conditions, and so on. In this study, the scatter impact on the CBCT based dose calculation was evaluated to provide the optimal condition minimizing the error. The CBCT images was acquired under three scatter conditions ("Under-scatter", "Over-scatter", and "Full-scatter") by adjusting amount of scatter materials around a electron density phantom (CIRS062, Tissue Simulation Technology, Norfolk, VA, USA). The CT number uniformities of CBCT images for water-equivalent materials of the phantom were assessed, and the location dependency, either "inner" or "outer" parts of the phantom, was also evaluated. The electron density correction curves were derived from CBCT images of the electron density phantom in each scatter condition. The electron density correction curves were applied to calculate the CBCT based doses, which were compared with the dose based on Fan Beam Computed Tomography (FBCT). Also, 5 prostate IMRT cases were enrolled to assess the accuracy of dose based on CBCT images using gamma index analysis and relative dose differences. As the CT number histogram of phantom CBCT images for water equivalent materials was fitted with a gaussian function, the FHWM (146 HU) for "Full-scatter" condition was the smallest among the FHWM for the three conditions (685 HU for "under scatter" and 264 HU for "over scatter"). Also, the variance of CT numbers was the smallest for the same ingredients located in the center and periphery of the phantom in the "Full-scatter" condition. The dose distributions calculated with FBCT and CBCT images compared in a gamma index evaluation of 1%/3 mm criteria and in the dose difference. With the electron density correction acquired in the same scatter condition, the CBCT based dose calculations tended to be the most accurate. In 5 prostate cases in which the mean equivalent diameter was 27.2 cm, the averaged gamma pass rate was 98% and the dose difference confirmed to be less than 2% (average 0.2%, ranged from -1.3% to 1.6%) with the electron density correction of the "Full-scatter" condition. The accuracy of CBCT based dose calculation could be confirmed that closely related to the CT number uniformity and to the similarity of the scatter conditions for the electron density correction curve and CBCT image. In pelvic cases, the most accurate dose calculation was achievable in the application of the electron density curves of the "Full-scatter" condition.