• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1453-1457
• /
• 2001

본 논문에서는 DC-제거 가능한 (2, 15) 런-길이 제한(RLL) 코드와 이 코드를 이용한 고밀도 광 기록을 위한 고효율의 성능을 나타내는 코딩 방법을 제안한다. 이 방법은 8/16의 코드율을 갖는 가족의 EFMPlus 코드와 비교하여 k-구속 조건이 다른 런-길이 파라미터를 가지고 있으나 EFM 코드에 비해 최소 6%에서 최대 10% 이상 높은 정보 밀도를 갖고 있어 고밀도 광 기록 시스템에 적용이 가능하다. 모의 실험을 통해, 코드율이 8/16에서는 EFMPlus 코드와 거의 유사한 성능을 보임을 확인했다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.82-85
• /
• 2006

OLED TV의 실현뿐만 아니라 생산성 향상을 위한 OLED의 유리기판의 대면적화가 요구되고 있다. 그러나 대면적 유리 기판은 얇은 두께로 인해 조작이 매우 어렵다. 이 연구는 굽힘지지의 새로운 대면적 유리 기판의 조작방법으로 유리 기판의 처짐을 최소화 하려 한다. 또한 대면적 유리기판의 최소 처짐을 위해 다양한 실험이 수행되고 있다. 이 새로운 유리 기판의 조작방법은 OLED 디스플레이의 제조과정에 사용될 수도 있다.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2188-2191
• /
• 2003

이 논문에서는 라플라스 밀도함수에 대한 최적 홑양자기 지지역은 양자점의 개수와 로그선형 관계가 있음을 증명한다. 그리고, 극상한값을 유도하여 최적 지지역의 로그선형 증가가 어떤 상수값을 초과하지 않음을 증명한다. 이 결과들로부터, 학계에 경험적으로 알려져 왔던 최적 지지역의 로그선형 증가를 증명한다.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2020.06a
• /
• pp.199-199
• /
• 2020

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.328-328
• /
• 2023

표준강수지수(Standardized Precipitation Index, SPI)는 강수량 변동의 정도를 표준화하여 나타낸 지수로, 가뭄 평가에 적용되고 있다. 일반적으로 SPI를 산정할 때는 월 단위의 시간 척도를 적용하며, 장기간의 가뭄에 대해 평가한다. 그러나 시간 척도가 길어질수록 가뭄 발생 후 가뭄을 감지하는 데 걸리는 시간이 더 길어지기 때문에 대처가 더욱 어려워진다. 또한, 기후변화로 인해 가뭄 빈도가 증가하고, 그 정도가 더욱 심화되면서 일 단위의 적용이 필요해지고 있다. 본 연구는 한반도 남부지역을 대상으로 일 단위의 SPI 적용을 위한 최소 시간 척도를 조사하였다. 대상 지역을 강원권, 수도권, 부울경, 대경권, 호남권, 충청권의 총 6개 지역으로 분리하여, 각 지역별, 계절별 최소 시간 척도를 조사하였다. SPI 산정을 위해 후보 분포형으로 Gumbel, Gamma, GEV, Loglogistic, Lognormal, Weibull을 적용하였으며, 시간 척도는 5일부터 365일까지 총 10개로 설정하였다. 본 연구에선 크게 적합도 검정과 정규성 검정으로 진행하였다. 적합도 검정에서는 Chi-square test를 적용하였으며, 이때 일 단위의 짧은 시간 척도를 적용할 경우 누가 강수 시계열의 값이 0으로, 0값이 시계열에 포함되면 SPI의 정확도가 떨어지는 문제가 발생하는데, 이를 보완하기 위해 누가 강수 시계열의 0값을 고려하였다. 마지막으로 각 후보 분포형을 적용하여 산정된 SPI가 표준정규분포에 합당한지를 검증하기 위해 Anderson-Darling test를 수행하였다. 결과적으로 대부분의 지역에서는 봄과 여름의 경우 최소 15일 정도의 시간 척도까지는 적용할 수 있을 것으로 판단되며, 겨울의 경우는 최소 30일 정도의 시간 척도를 적용해야 함을 확인하였다. 지역별로 차이가 크진 않지만, 이러한 연구 결과를 참고하여 각 지역별로 더 나은 가뭄 대책을 마련할 수 있을 것으로 기대된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.394-403
• /
• 2009

As the minimally invasive approach against white spot like early caries lesions in proximal surfaces of the teeth, therapeutic sealing has been introduced and studied for effective materials and methods to arrest the early caries lesion effectively, which is still going on. This study was performed for the purpose of evaluating its validity for the non-cavitated lesions according to the depth from surface using therapeutic sealing followed by artificial caries induction and evaluation with micro-CT, and we obtained the results as follows. 1. It was revealed that the deeper the caries lesions are, the lower radiation intensity at lesion body areas in pre-treatment specimen. 2. In the sealed groups, there were no differences in radiation intensity between pre- and post-treatment, whereas there were significant decreases in unsealed groups(p<0.05). 3. Even in the specimens with the lesions reaching deeply into DEJ, the effect of sealing was significant(p<0.05). Conclusively, it was thought therapeutic sealing can be an effective tool against the early caries lesions, regardless of their depth into tooth, unless cavitated.

• Journal of Radiation Protection and Research
• /
• v.20 no.4
• /
• pp.265-274
• /
• 1995

Diffusivity of ions of radioactive species is an important factor for designing radwaste repositories. Clay minerals are used as a backfill material. In this study, diffusion of Co-60 ions through the bentonite having various densities has been studied, using a diffusion cell. The measured diffusivities of Co-60 ions decreased as the density of bentonite increased. The diffusivity of Co-60 ion decreased from $8.79{\times}10^{11}m^2/s$ to $6.82{\times}10-13m^2/s$ as the clay dry bulk density increased from 0.41 to 2.03g/cm3. The diffusivity of Co ion was larger than that of Sr ion at low density, but the diffusivity of Co ion decreased rapidly as the density of clay increased and became smaller than that of Cs ion at high density. This phenomenon is thought to be caused by the rapid decrease of the fraction of mobile cation since the chemical combination of Co ions with oxygen or oxide on clay surface and the entrance of Co ions into the crystal structure of clay increase as the clay density increases. This change should be considered especially in designing the clay back fill for low and intermediate radwaste disposal facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1367-1375
• /
• 2015

The purpose of this paper is to suggest 10 mm aggregate specification for thin layer asphalt pavement using steel slag. Aggregate gradations of conventional dense-graded asphalt mixtures were made by fuller's model, whereas 10 mm dense-graded asphalt mixture was obtained tender mix due to close to the maximum density line. The proposed aggregate gradation specification was made to have enough VMA and well-interlocking refer to foreign standards. The correlation between the proposed aggregate gradation and the properties of mixtures were analyzed using Gradation Ratio (GR) and Compacted Aggregate Density (CAD). The CAD index has a high $R^2$ of 0.86-0.99 because the CAD index is able to reflect various aggregate properties. As the results of evaluation by CAD index the proposed aggregate gradation provides more reliable stability and VMA. The percent passing (%) of aggregate size smaller than 0.3 mm was limited 10% or more for improving crack resistance. This limitation increased for 15% of the asphalt mixture's toughness.

• Journal of Radiation Protection and Research
• /
• v.33 no.3
• /
• pp.121-126
• /
• 2008

Radioactivities of the stack air effluents from the Advance Fuel Science Building (AFSB) at KAERI have been investigated and evaluated. In this AFSB, nuclear fuels for the HANARO research reactor have been fabricated and the advanced nuclear fuels have been studied. A stack air monitoring system has been continuously operating to monitor the stack air effluents from the facility to protect the environment. As the results of the periodical radioactivity measurement and both the gamma and alpha spectrometry for the millipore filters taken from the stack air monitor from January until March 2008, a trace amount of primordial $^{40}K$ and the short-lived decay products of natural borne $^{222}Rn$ and $^{220}Rn$ have been detected. However, the radioactivities have rapidly decayed to the level below the Minimum Detectable Activity (MDA) of the counting system. Therefore, it was evaluated that no uranium isotopes have been released to the atmosphere from the stack of the AFSB at KAERI.