• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.200-207
• /
• 2019

The movement distance and home range size of Pelophylax chosenicus were identified in the rice paddy and ecological park as alternative habitats from July to November 2017. A total of 39 frogs were tracked by radio tracking method. As a result, the average move distance in the population of rice paddy was 11.7 ± 1.9 m (n = 64) and the population of ecological park was 24.7 ± 4.3 m (n = 39). The move distance between the two populations was significantly different. The mean MCP of the population of rice paddy was 181.2 ± 110.8 m² (n = 11) and the population of ecological park was 416.1 ± 276.2 m² (n = 10), but there was no significant difference. The population area of rice paddy was 4,160 m² (Kernel density 95%) and the core area was 1,080 m² (Kernel density 50%). The population area (Kernel density 95%) of ecological park was 5,391 m² and the core area (Kernel density 50%) was 736 m². This study shows that it is appropriate to construct the area of alternative habitat for P. chosenicus at least 1.33 ha, and it is more advantageous for the ecological park to be constructed than the paddy field with high development pressure and human interference. If the rice paddies were to be abandoned for several years, or to be used traditional farming methods, such as refraining from using agricultural machinery and chemicals, they could be used as alternative habitat for P. chosenicus.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.25-38
• /
• 1996

To investigate the stability problem of irrigation-drainage channel excavation slope on soft ground, analyzed the behavior of the soft ground with excavation slope by the limit equilibrium method and the finite element method, and compared with field tests. The results of this study were summarized as follows; 1. When rapid drawdown the water level, the crack was occurred by the effect of the excess pore water pressure, and the pore water pressure was decreased slowly. 2. As the width of excavation was larger, the crack width was larger. And, excavated depth was deeper, the progressive failure was appeared. 3. When the soft ground excavation was small-scale, the minimum safety factor was more effected by cohesion(1.0, 1.5, 2.0, 2.5, 3.0) than excavated slope inclination(1:l, 1:1.5, 1:2). 4. As excavation was progressed, the settlement occurred on the top-slope due to plastic domain, and heaving was occurred at the bottom of excavation. 5. The maximum shear stress was appeared greatly as the base part of slope went down. Because of the increase of the maximum shear stress, tension area occurred and local failure possibility was increased. 6. As the excavation depth was increased, the maximum shear strain was appeared greatly at the base of slope and distribution pattern was concentrated beneath the middle of slope.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.125-130
• /
• 2015

The objective of this study was to investigate the feasibility of using near infrared spectroscopy (NIRS) to discriminate between grass spices. A combination of NIRS and chemometrics was used to discriminate between Italian ryegrass, perennial ryegrass, and tall fescue seeds. A total of 240 samples were used to develop the best discriminant equation, whereby three spectra range (visible, NIR, and full range) were applied within a 680 nm to 2500 nm wavelength. The calibration equation for the discriminant analysis was developed using partial least square (PLS) regression and discrimination equation (DE) analysis. A PLS discriminant analysis model for the three spectra range that was developed with the mathematic pretreatment "1,8,8,1" successfully discriminated between Italian ryegrass, perennial ryegrass, and tall fescue. An external validation indicated that all of the samples were discriminated correctly. The discriminant accuracy was shown as 68%, 78%, and 73% for Italian ryegrass, perennial ryegrass, and tall fescue, respectively, with the NIR full-range spectra. The results demonstrate the usefulness of the NIRS-chemometrics combination as a rapid method for the discrimination of grass species by seed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.4
• /
• pp.259-264
• /
• 2020

The aim of this study was to investigate the feasibility of discrimination 12 different cultivar of sorghum × sudangrass hybrid (Sorghum genus) seed through near infrared spectroscopy (NIRS). The amount of samples for develop to the best discriminant equation was 360. Whole samples were applied different three spectra range (visible, NIR and full range) within 680-2500 nm wavelength and the spectrastar 2500 Near near infrared was used to measure spectra. The calibration equation for discriminant analysis was developed partial least square (PLS) regression and discrimination equation (DE) analysis. The PLS discriminant analysis model for three spectra range developed with mathematic pretreatment 1,8,8,1 successfully discriminated 12 different sorghum genus. External validation indicated that all samples were discriminated correctly. The whole discriminant accuracy shown 82 ~ 100 % in NIR full range spectra. The results demonstrated the usefulness of NIRS combined with chemometrics as a rapid method for discrimination of sorghum × sudangrass hybrid cultivar through seed.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.52-57
• /
• 2015

The focal spot of electron beam depending on the anode angle in the structure and major parts of the X-ray tube was investigated by the OPERA-3D/SCALAR simulation program. The simulation worked on four spaces with with two spaces, including anode and cathode of X-ray tube, by applying the finite element method analysis. The analytical model and dimension for the emission orbit of thermal electrons made from one filament of the focused X-ray cathode is affected to the penumbra of detector for the X-ray depending on any real focal spot size. The model shape of focusing cap and focusing tube with an anode target angle and a cathode filament is analyzed by the current density distribution of thermal electrons. The focusing width of thermal electrons for the X-ray tube depended on the anode angle (${\theta}$). The focusing value of electron beams at a region of anode angle having $10^{\circ}{\sim}17^{\circ}$ maintained to below value of $70{\mu}m$. The minimum focal size of the electron beam was $40{\mu}m$ at an anode angle of $15^{\circ}$. The focused X-ray tube of many variables depended on the thermionic emission of hot electrons from the target trajectory. The focusing tube will contribute to the real design of X-ray for the development of future diagnosis medical device.

• Journal of the Korean Magnetics Society
• /
• v.2 no.3
• /
• pp.228-232
• /
• 1992

Magnetic properties of grain aligned high $T_c\;Y_1Ba_2Cu_3O_{7-y}$ superconductor are inverstigated. Grain-aligned superconductors have magnetic anisotropy in the Cu-O layer like single crystals. The lower critical field $H_{c1},$ measured at the temperature range of 2 K up to 77 K, is found to be decreasing linearly as temperature goes up. Moreover, it decreaes more rapidly when the Cu-O layer is perpendicular to the external magnetic field. The temperature dependence of the magnetic susceptibility shows that the value of magnetic susceptibility, $4{\pi}\;X,$ is close to -1 at low temperature. The intra grain critical current density $J_c,$ obtained from the Bean's critical state model, is found to be comparable to that of single crystal superconductors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.347-352
• /
• 2012

In this paper, an 2D spatial-map construction for workers identification and avoidance of AGV using the detection scheme of the spatial coordinates based on stereo camera is proposed. In the proposed system, face area of a moving person is detected from a left image among the stereo image pairs by using the YCbCr color model and its center coordinates are computed by using the centroid method and then using these data, the stereo camera embedded on the mobile robot can be controlled for tracking the moving target in real-time. Moreover, using the disparity map obtained from the left and right images captured by the tracking-controlled stereo camera system and the perspective transformation between a 3-D scene and an image plane, depth map can be detected. From some experiments on AGV driving with 240 frames of the stereo images, it is analyzed that error ratio between the calculated and measured values of the worker's width is found to be very low value of 2.19% and 1.52% on average.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.210-218
• /
• 2011

Generally, GIS digital map has been represented and transmitted by ASCII and Binary data forms. Among these forms, Binary form has been widely used in many GIS application fields for the transmission of mass map data. In this paper, we present a hierarchical compression technique of polyline and polygon components for effective storage and transmission of vector map with various degree of decision. These components are core geometric components that represent main layers in vector map. The proposed technique performs firstly the energy compaction of all polyline and polygon components in spatial domain for the lossless compression of detailed vector map and compress independently integer parts and fraction parts of 64bit floating points. From experimental results, we confirmed that the proposed technique has superior compressive performance to the conventional data compression of 7z, zip, rar and gz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1384-1396
• /
• 1998

This paper ivestigates the performance of a relative rate (RR) switch algorithm for the rate-based available bit rate (ABR) flow control in asynchronous transfer mode (ATM) networks. A RR switch may notify the network congestion status to the source by suing the congestion indication (CI) bit or no increase (NI)bit in the backward RM (BRM) cells. A RR switch can be differently implemented according to the congestion detectio and notification methods. In this paper, we propose three implementation schemes for the RR switch with different congestion detection and notification methods, and analyze the allowed cell rate (ACR) of a source and the queue length of a switch in steady state. In addition, we derive the upper and lower bounds for the maximum and minimum queue lengths for each scheme respectively, and evaluate the effects of the ABR parameter values on the queue length. Furthermore, we suggest the range of the rage increase factor (RIF) and rate decrease factor (RDF) parameter values which can prevent buffer overflow and underflow at a switch.

• Journal of the Korea Convergence Society
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2014

The purpose of this paper was to evaluate the fatigue life to apply the vibration fatigue analysis considering the stiffness change of the spot welding due to fatigue damage accumulation. For this, the mechanical and fatigue properties of base and spot welded standard specimens were obtained through the tensile and constant amplitude fatigue test. The transfer function of the spot-welded structure was obtained from the frequency response analysis and fatigue analyisis was performed under the condition of PSD=0.11. A vibration fatigue analysis that considered changes in the frequency response due to the fatigue damage that is, failure of some wleding point was conducted on spot-welded structure. The fatigue life of the spot-welded structure was determined by combining the transfer function, the S-N curve of the tensile-shear spot-welded joint and the input PSD.