• 전기의세계
• /
• v.43 no.1
• /
• pp.13-19
• /
• 1994

전자식 안정기는 최근 에너지 절약 정책과 관련하여 조명기기분야의 관심의 대상이 되었고, 절전 효율이 높은 고품질의 전자식 안정기에 대한 연구 개발 및 보급이 점점 더 확대되고 있는 추세이다. 일반적으로 전자식 안정기는 수십 KHz의 고주파에서 형광등을 구동시킴으로써 빛의 깜박거림과 가청잡음이 없으며, 저주파(60Hz)에서 사용하는 재래식 안정기(choke coil 방식)에 비해 높은 절전 효과를 얻을 수 있다[1-4]. 특히, 빌딩 사무실의 경우 낮에도 창가의 형광등이 켜져 있어서 막대한 전력을 낭비하고 있는 실정이므로, 일조량에 따른 자동 전력 조절이 가능한 전자식 형광등의 출현이 기대되고 있다. 전자식 안정기의 보급 확대를 위해서는 절전 효과 뿐만 아니라, 품질 문제, 수명 문제등을 고려하여야 하는 바, 예를 들면 순간 점등으로 방전초기의 sputtering 현상에 의한 lamp의 수명 단축, 미소 입력전압 변동에 따른 급격한 광출력의 변화로 절전 효과의 상실과 이상동작에 의한 스위칭 소자의 파괴 현상, 고주파 스위칭시 발생되는 전력손실과 noise등에 대한 대책이 요구되고 있다. 이러한 점을 개선하기 위해 추가되는 회로는 전자식 안정기 시스템을 더욱 복잡하게 만들고, 경제적으로 원가 부담을 주기 때문ㅇ 고품질의 전자식 안정기를 보급하는데 어려운 점으로 부각되고 있다. 본 고에서는 이러한 문제를 해결하기 위하여 조광기능을 포함한 다양한 제어회로와 보호회로를 조광기능을 포함한 다양한 제어회로와 보호회로를 1 chip에 수용하는 고품질의 전자식 안정기 제어용 집적회로에 대해서 기술하고자 한다.되어 나아갈 기술의 조류에도 부합하는 형태라 하겠다. 그러나 이 방식은 기 언급한 바와 같이 분산처리를 관장하는 운영체계의 개발에 상당한 고전이 따르리라 보여지며, 또한 보다 상세한 연구가 선행되어야 하겠지만 개발된 상용의 통신 프로토콜로서는 병렬처리의 성능을 극대화 하기에는 여러가지 제약이 있을 것으로 예측된다.기기들이 어떻게 응용되고 있는지 살펴보기로 하자. real informations would be available. Results are compared with those of optimal power flows.기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.827-833
• /
• 2014

This study was conducted to investigate the effects of pretreatment and shipping temperature on leaf chlorosis in cut Lilium Oriental hybrid 'Siberia'. Cut lilies were shipped under various temperatures (5, 10, 15, $25^{\circ}C$) for 5 days. When cut lilies were shipped at $25^{\circ}C$, leaf chlorosis was accelerated. However, chlorosis was significantly decreased by shipping at 5 to $15^{\circ}C$. In addition, leaf chlorosis was significantly decreased when the cut lilies were pretreated with a solution containing Promalin (BA + $GA_{4+7}$) as compared to the control. Promalin completely prevented postharvest leaf chlorosis, whereas $GA_3$ and Chrysal SVB were ineffective. Leaf chlorosis decreased more with Promalin dip treatment than with spray treatment. This pretreatment solution also extended the vase life of cut lilies. When cut lilies were pretreated with Promalin, yield (Fv/Fm) of chlorophyll fluorescence was highly maintained. Especially chlorophyll content was significant increased by Promalin treatment. Thus, shipping between 5 and $15^{\circ}C$ and Promalin dip pretreatment significantly decreased leaf chlorosis in cut 'Siberia' lilies.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.402-415
• /
• 2001

Advantages of flash memories are their shock resistance and fast read speed, which is much faster than that of a HDD. Because of these characteristics, they are increasingly used in the traditional household electric appliance and portable handset and therefore, development of file systems which use them as storage medium is increasingly needed. But they have two problems as storage medium. First, data stored in them cannot be overwritten: it must be erased before new data can be stored. Unfortunately, this erase operation usually takes about one second. Consequently, updating data in flash memories takes long time. In this paper, their problem is solved by using a data update mechanism like LFS(Log-structured File System). Second, their erase operations are restricted. We propose novel cleaning policy in order to increase the life cycle. We implemented FAT file system, which is suitable to small storage medium and solved problems, which usually happen in implementing FAT. We evaluated the performance of sequential writes and random writes on our implemented flash file system.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.184-192
• /
• 2005

Intracanal separation of the rotary files is a serious concern in modern endodontic practice. The objective of this study was to compare the life span and fracture patterns of three NiTi rotary files in molar teeth Mesiobuccal roots of upper molar (n = 150) and mesial roots of lower molar (n = 150) were divided into three groups and each group was prepared with Profile, ProTaper, and K3 respectively. Every file was used until separation and/or deterioration of the cutting blade was happened, and then the number of canals to separation and/or unwinding were recorded. Radiographs and Scanning electon microscope (SEM) photographs were taken to evaluate the patterns of separation. The results were as follows: 1. There were no significant differences in numbers of canals to separation and/or unwinding among the groups. 2. Comparing between flaring files, K3 showed significant lower numbers of canals to separation and/or unwinding (p < 0.05), and there was no significant difference between shaping files 3. Separations of instruments were occurred at the midpoint of curvatures within the canals 4. In SEM observations, ductile fractures were seen in most of cases, characterized by shallow dimples. Additional researches is needed to provide a new guideline that informs the appropriate number of times to use NiTi files.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.691-699
• /
• 2014

In order to increase network lifetime, duty-cycle MAC protocols which can reduce energy consumption caused by idle listening is proposed for WSNs. In common duty-cycle MAC protocols, each sensor node calculates its duty-cycle interval based on the current amount of residual energy. However, in WSNs with the capability of energy harvesting, existing duty-cycle intervals based on the residual energy may cause the sensor nodes which have high energy harvesting rate to suffer unnecessary sleep latency. Therefore, a duty-cycle scheduling scheme which adjust the duty-cycle interval based on both of the residual energy and the energy harvesting rate was proposed in our previous work. However, since this duty-cycle MAC protocol overlooked the performance variation according to the change of duty-cycle interval and adjusted the duty-cycle interval only linearly, the optimal duty-cycle interval could not be obtained to meet application requirements. In this paper, we propose three methods which calculate the duty-cycle interval and analyse their results. Through simulation study, we verify that network lifetime, end-to-end delay and packet delivery ratio can be improved up to 23%, 44% and 31% as compared to the existing linear duty-cycle scheduling method, respectively.

• Journal of Aquaculture
• /
• v.8 no.1
• /
• pp.59-67
• /
• 1995

Growth rate, first reproductive age, life span and total offspring numbers were measured to study the effects of water temperature and salinity on the propagation of rotifer, Brachionus plicatilis. Three types of rotifer, Large (L), Small (S) and Thailand Small (TS)-types, were cultured in the $4\times4$ factorial culture conditions with four different salinities (5, 15, 25 and $35\%o$) at each of four different water temperatures (15, 20, 25 and $29^{\circ}C$). The results are as follows; Under the 4 different salinity gradients %$(5\%o,\;15\%o,\;25\%o,\;and\;35\%o)\;at\;29^{\circ}C$, the mean growth rates of L, Sand TS-type were 0.60, 0.84 and 0.96, respectively. The first reproductive age of three types rotifer appeared to be early at high water temperature. The total offspring numbers of the three types were higher at $25^{\circ}C\;and\;29^{\circ}C$, with the maximum value of 28.3 on the average at $29^{\circ}C$ for TS-type, and the minimum value at $15^{\circ}C$ for S-type. Life span decreased with high water temperature and increased with low water temperature. L-type and TS-type rotifer showed the longest life span of 13.5 days on the average at $15^{\circ}C$, and S-type showed shortest 6.2 days on the average at $29^{\circ}C$.

• Korean journal of applied entomology
• /
• v.27 no.2
• /
• pp.103-110
• /
• 1988

The behavior and circadian rhythm of emergence, copulation and oviposition in the Oriental tobacco budworm (Heliothis assulta Guenee) were studied to obtain the following results. More than three quarters of adults emerged within 3 hours after the light-off. It took about 33 min for an adult to expand and tan its wings after emergence. Adult male showed a sequential pattern of mating behavior, such as antennal movement, wing elevation and vibration, exten¬sion of hairpencils, and tapping of female ovipositor leading to a copulation. However, adult female revealed a rather simple behavior, such as protraction and retraction of her terminal abdomen and vibration of wings. All of the mating took place during the early part of the scotophase, with the peak from 1 hr to 2 hrs after the light-off. But the mating peak in virgin females tended to advance with age. Adult females showed the highest rate of mating among 24 hr-olds and the rate declined with age. The rate of first matings in males gave a very similar pattern to that of females. The duration of copulation was $77\pm$14min. Oviposition occurred throughout the entire scotophase, with the peak during the first 2 hrs. The most nu¬mber of eggs deposited daily was seen on the 3rd day after the mating. Mating rate, number of eggs laid and longevity we~e compared under different sex ratio. Unmated adults lived longer than mated adults.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.193-198
• /
• 1998

Experiments were conducted to investigate the population fluctuation, developmental periods, fecundity, hatching rate and demage of Citrus red mite (Panonychus citri M.) on Yuzu trees (citrus junos T.) from 1996 to 1997. Citrus red mite occurred from May to November and made two peaks. The first peak was in July to August and the secondary peak was in October. Density of the second peak was higher (9.5 miteslleaf) than that of the first peak. In the constitution rate of each developmental stage of citrus red mite on Yuzu leaves, egg stage occupied 85%. At the four constant temperature (15, 20, 25, 30 + 1$^{\circ}$C, RH 60 + lo%, 14L- IOD) conditions, the developmental period from egg to adult was 41 .l, 15.5, 11.0 and 9.4 days ; Mean longevity of adult was 23.3, 8.3, 6.3, and 6.1 days; Mean number of egg laid per female per day was 1.6, 3.2, 4.5, 4.0 eggs; Mean hatching rate was 66.6, 85.7, 90.7 and 94.7% at above temperature, respectively. When sprayed acaricide at different density of Citrus red mite, the growth of young Yuzu tree were better at low density. Defoliation rate during winter was 13.5, 20.6, 53.1, 72.6% at 4 control density 1 , 3, 6 mites per leaf and uncontrolled (10 ( ). When every time spray acaricide under 3 mites per leaf, defoliation rate during winter suppressed above 50% compare to uncontrol 72.6%.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.21-32
• /
• 2022

Steel pile foundations are widely used for offshore constructions due to their high bearing capacity and efficiency. Typically, offshore structures that have reached the end of their design life are required to be demolished. However, pile foundations are often left on site due to technical and economic limitations. The pile left on the site not only pollutes the environment, but can also cause obstacles for the construction of new structures. Therefore, research is required to completely eliminate these foundations at the site. In this study, a new type of double-wall pile foundation that can drastically reduce the pull-out load was conceptually proposed, and a series of model tests were performed to validate the performance of the double-wall pile foundation. The installation and extraction of the double-wall pile were simulated in dry sand in the model test, and the measured up-lift load was compared to that of the conventional pile. According to the result, the maximum up-lift load induced by the decommissioning of the double-wall pile was reduced by 45% when compared to the traditional pile in dense sand. This study verified the mechanism for reducing the up-lift load of the double-wall foundation and confirmed the possibility of completely decommissioning a pile that has reached the end of its nominal service life.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.185-185
• /
• 2012

중공 발광 나노 물질은 특유의 구조적 특성(낮은 밀도, 높은 비표면적, 다공성 물질, 낮은 열팽창계수 등)과 광학적 성질을 이용하여 디스플레이 패널, 광결정, 약물전달체, 바이오 이미징 라벨 등의 다양한 적용이 가능하다. 이러한 적용에 있어 균일한 크기와 형태의 중공 입자는 필수 조건으로 여겨진다. 지금까지 합성된 중공 발광 입자에는 BaMgAl10O17 : Eu2+-Nd3+, Gd2O3 : Eu3+, $EuPO_4{\cdot}H_2O$과 같은 것들이 있으나 크기 조절이 어렵고, 그 균일성이 확보되지 못하였다. 균일한 크기의 중공 발광 입자를 만들기 위해 SiO2나 emulsion을 템플릿으로 이용하여 황화카드뮴, 카드뮴 셀레나이드 중공 입자를 합성한 예가 있으나, 양자점의 독성으로 인하여 바이오분야 응용에는 적합하지 않다. YAG는 모체로써 형광체에서 가장 많이 이용되는 물질로, 화학적 안정성과 낮은 독성, 높은 양자 효율 등 많은 장점을 갖고 있다. 특히 세륨이 도핑된 YAG형광체의 경우 WLED, 신틸레이터, 바이오산업에 적용이 가능하다. 그러나 지금까지 중공 YAG:Ce3+형광체를 합성한 예가 없었다. 본 연구에서는 단분산 수화 알루미늄 (Al(OH)3) 입자 위에 세륨이 도핑 된 이트륨 베이직 카보네이트 ($Y(OH)CO_3$)를 균일하게 코팅한 후 열처리를 하여 균일한 크기의 Y3Al5O12:Ce3+(YAG) 중공 입자를 합성하였다. 열처리 온도에 따른 고분해능 투과 전자 현미경(HRTEM), X-선 회절(XRD), 고분해능 에너지 분광법(HREDX) 분석결과, 중공 YAG: Ce3+입자는 Kirkendall 효과에 의해 형성됨을 확인하였다. 전계방사형 주사 전자 현미경(FE-SEM) 측정을 통해, 열처리 후에도 입자의 크기와 형태가 균일함을 확인하였으며, 공초점 현미경 관찰을 통해 중공 형태를 명확히 확인 할 수 있었다. Photoluminescence (PL) 분광법과 형광 수명 이미징 현미경(FLIM)을 이용한 광 특성 분석결과, 합성된 입자는 400-500 nm에서 흡수 파장 (456 nm에서 최대 강도)과 500-700 nm 범위의 발광 파장(544 nm에서 최대 강도)을 나타냈고, 상용 YAG: Ce3+(70 ns)에 준하는 74 ns의 잔광 시간(decay time)이 측정되었다. 단분산 수화 알루미늄 입자의 크기를 조절하여 최종 합성된 YAG: Ce3+의 크기를 조절할 수 있었다. 지름 약 600 nm의 Al(OH)3를 사용한 경우, $1,300^{\circ}C$에서 열처리를 한 후 평균 지름 590 nm의 중공입자를 합성하였고, 약 170 nm의 Al(OH)3를 이용하여, 더 낮은 온도인 $1,100^{\circ}C$에서의 열처리를 통해 평균지름 140 nm의 중공 YAG: Ce3+입자를 합성하였다. 본 연구를 통하여 합성된 균일한 크기의 YAG 중공입자는 LED와 같은 광전변환 소자 및 다기능성 바이오 이미징 등의 나노바이오 소자 분야에 활용될 수 있음이 기대된다.