• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.239-246
• /
• 2004

Accelerated degradation test (ADT) can be a useful tool for assessing the reliability when few or even no failure are expected in an accelerated life test. In this paper, MLCC (Multilayer Ceramic Capacitors), a sort of passive components which have large capacitance(X7R -55$^{\circ}C$~1$25^{\circ}C$) have been tested, and least-square analyses are used to illustrate our approach in which amount of degradation of a DUT following log-normal distribution. We assumed a simple and useful linear model to describe the amount of degradation over time subjected to different voltage levels applied. Tests for linearity of the performance-time relationship, and provide tests for how well the assumptions hold. Also, by using Eyring Model, MLCC's mean life time is assessed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1349-1355
• /
• 1990

By examining the fatigue deformation properties of 12% Cr rotor steel which has been proved to have high fatigue and creep rupture strength around 600deg. C, authors reviewed major fatigue life prediction models such as Manson, Langer and Morrow equations, and following results were obtained. (1) A simple life prediction model for 12% Cr rotor steel was obtained as follows : DELTA..epsilon.$_{t}$ =2.18+.sigma.$_{u}$ /E+ $N^{-0.065}$+ $e^{0.6}$ $N^{-0.025}$ This equation shows that fatigue life, N, can be easily determined when total strain range, DELTA..epsilon.$_{t}$ and ultimate tensile strength, .sigma.$_{u}$ are known by simple tension test on the given test conditions. (2) Life prediction equation with equivalent maximum stress, DELTA..sigma./2, corresponding maximum strain in one cycle at room temperature is as follows: DELTA..sigma./w=-7.01logN+96.69+96.69

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.160-163
• /
• 2005

Top emission OLED 소자의 안정성 위하여 Parylene을 보호층으로 적용하였다. 고분자화 방법을 이용하여 증착된 Parylene은 진공공정상온에서 증착가능하기 때문에 열에 의한 OLED 소자의 열화를 방지하며 높은 광투과율과 우수한 투습습성에 의하여 고효율 장수명을 OLED 소자에 적합하다. Parylene 5 ${\mu}m$ 의 광투과율은 90 %이상 측정 되었으며 투습율은 0.4849 $g/m^2day$로 측정되었다. Parylene의 보호층로서의 영향을 살펴보기 위하여, 보호층이 형성된 소자와 보호층이 형성되지 않은 소자를 제작하여 대기중에서 그 특성을 측정 비교하였다. 두 제작된 top emission OLED 소자는 최대 휘도가 1000 $cd/m^2$ 이상 측정되었으며, parylene 보호층 공정에 의한 소자의 구동 특성 변화는 나타나지 않았다. 대기중에서 초기휘도 200 $cd/m^2$로 측정된 parylene 보호층이 형성된 소자는 수명이 5 이었고, 보호층이 형성되지 않는 소자의 수명에 비하여 2배 이상 증가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.141.2-141.2
• /
• 2015

교류임피던스 측정기법을 이용하여 전기화학적으로 외부환경에서 소재 금속까지 물질 및 전하이동에 관한 임피던스 측정이 가능하며 도막의 부식 및 노화정도 및 내식성의 평가가 가능하여 산업체에서 널리 이용되고 있다. RPCS(Remote Plasma Cleaning Source)는 패널 및 반도체 제조공정에서 CVD 증착공정 후 챔버 내부에 입혀지는 Si(실리콘)을 화학적으로 세정하기 위한 F(불소) Radical을 공급하는 원격 고밀도 플라즈마를 발생시키는 제품이다. RPCS의 바디는 알루미늄을 사용하고 절연 및 플라즈마에 대한 내구성을 확보하기 위해 아노다이징 코팅을 한다. 반응기 내벽의 표면이 공정 플라즈마에 노출될 때 소재는 화학적으로 매우 활성이 높은 라디칼과의 반응뿐만 아니라 이온의 충격을 동시에 받게 되며 이 과정에서 다량의 불소 (Fluorine) 라디칼과 전계에 반응한 이온의 운동에 노출되면서 아노다이징 코팅이 손상되는데 이는 기기의 수명 단축 및 파티클을 발생시키며, Arc의 원인이 되기도 한다. 실제 사용 환경에서는 기기의 분해 없이 아노다이징의 상태를 주기적으로 모니터링 하기가 대단히 어려워, 정기적으로 교체하고 있는 실정이다. 본 연구에서는 RPCS내 발생된 플라즈마 현상을 컨덕터로 활용하여 고주파 리액턴스를 임피던스로 환산하여 아노다이징 코팅의 손상 정도를 진단 및 모니터링하였다. 아노다이징이 손상된 내부 블럭과 정상상태인 내부 블럭의 임피던스를 비교하였고, 아노다이징 두께별 임피던스를 측정하였다. 그 결과 아노다이징 절연막이 손상된 블록의 임피던스가 정상 블록에 비해 낮았으며 두께별 임피던스도 비례함을 알 수 있었다. 향후에는 장기간 현장에서 축척되어진 시험데이터를 바탕으로 아노다이징 코팅의 수명예측진단 시스템을 구축하고자 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.103-111
• /
• 2002

Steady-state creep analysis of power generation turbine blade is carried out considering thermal loads and centrifugal forces. Creep strains and stresses of the turbine blade are calculated for 3-D finite clement model of the turbine blade. From the numerical results, creep life of the turbine blade is predicted. The results of creep analysis during about 200 hours indicate that creep strains of the turbine blade do not reach the rupture strain of GTD111. Creep stresses of the turbine blade are relaxed as time increases. Maximum creep strain occurs at the tip section of the airfoil pressure surface. The maximum creep strain of the turbine blade is expected close to the rupture strain after 50,000 hours approximately. The turbine blade may not have creep damage for the starting procedure of the turbine.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.413-421
• /
• 2015

Since the first Cubesat was launched in 2003, there have been more than 230 Cubesats launched so far. Due to their small size and lightweight, Cubesats were launched by utilizing the empty space of regular launch vehicle. However, this launch method has a weakness that has been easily affecting by the schedule of major payloads. As a new solution to this problem, it has been proposed that a robot arm installed on ISS would be used to launch Cubesats. The orbits of Cubesat deployed from the ISS in various angles and directions are analyzed in this paper. We also analyze the possibility of collision between the Cubesat and ISS within the operational orbit of the CubeSat and eventually calculate the optimal angle of a robot arm, which maximizes the lifetime of Cubesat and minimizes the risk of collision between the Cubesat and ISS.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.561-565
• /
• 2010

Many methods have been researched to prolong sensor network lifetime using mobile technologies. In the mobile sink research, there are the track based methods and the anchor points based methods as representative operation methods for mobile sinks. However, the existing methods decrease Quality of Service (QoS) and lead the routing hotspot in the vicinity of the mobile sink. The reason is that they use static mobile paths that are not concerned about the network environments such as the query position and the data priority. In this paper, we propose the novel mobile sink operation method that solves the problems of the existing methods. In our method, the probing priority of the mobile sink is determined with the data priorities for increasing the QoS and the mobile features are used for reducing the routing hotspot. The experimental results show that the proposed method reduces query response time and improves network lifetime over the existing methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.911-917
• /
• 2008

In this paper. we introduce and investigate new architectures and comprehensive design methodologies of intelligent dimming converter and evaluate the proposed model and the system through a series of numeric experiments. The intelligent dimming converter is developed by using the regression polynomial fuzzy model. In this paper, we put emphasis on the design of electronic ballast based on intelligent dimming converter and the energy saving according to the day-light and the user setting by applying the intelligent model to a fluorescent lamp. We show the superiority of the proposed intelligent dimming converter through the evaluation of performance with conventional electronic ballast by applying the intelligent model to real systems.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.247-255
• /
• 2011

Most existing clustering protocols have been aimed to provide balancing the residual energy of each node and maximizing life-time of wireless sensor networks. In this paper, we present the adaptive clustering strategy related to sink position for clustering protocols in wireless sensor networks. This protocol allows networks topology to be adaptive to the change of the sink position by using symmetrical clustering strategy that restricts the growth of clusters based on depth of the tree. In addition, it also guarantees each cluster the equal life-time, which may be extended compared with the existing clustering protocols. We evaluated the performance of our clustering scheme comparing to LEACH and EEUC, and observe that our protocol is observed to outperform existing protocols in terms of energy consumption and longevity of the network.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.2 s.24
• /
• pp.111-119
• /
• 2005

Although the life-spans of most apartment buildings are over fifty years, they are often demolished and retrofitted only after twenty years, in spite of its remaining life expectancy, resulting in economical waste. The purpose of this paper is to estimate optimum remodeling period of apartment buildings using total cost. In this study it is seen that total sum of running cost of life-span on the buildings is about 4.69 times of initial cost till the fifty years of the life expectancy. The optimum remodeling period of the apartment building is thirty years applying the discount rate of $4.17\%$ and the discount rate should be $6.122\%$ to obtain the forty years of the optimum remodeling period. From the sensitivity analysis based on the change of the discount rates, it is seen that if discount rate decreases the optimum remodeling period can be extended, or vice versa. As a result, a time of the demolished and remodeling can be expected and the basic data can also be established for lengthening life-span of the apartment buildings.