• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.840-847
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene (m-LLDPE)/linear low density polyethylene (LLDPE) blends were investigated. The effect of blending on the induction time for crystallization, spherulites growth rate, and maximum size of spherulites was mainly considered in this study. The formation of separate crystal which is well known crystallization behavior in LLDPE/LDPE blend was not found in m-LLDPE/LLDPE blends. The blending m-LLDPE to LLDPE caused the dramatic decrease in the induction time of m-LLDPE/LLDPE blends but it seems that the blend composition shows less effect on the induction time. Lower branching number in m-LLDPE resulted in the increasing of spherulites growth rate and the maximum size of spherulites is depend upon both the induction time and spherulites growth rate of LLDPE component affected by m-LLDPE.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.257-266
• /
• 2007

The research on red tide is generally in progress through field work, such as the naked eye and sampling. It was difficult to forecast exactly the course, from appearance of red tide to disappearance. with the established ways of investigation and analysis. Accordingly it is need to analyze environmental factors in time and space, the appearance of red tide and the path of its migration by more objective and scientific methods. In this study, GIS is applied to analyse the space character of red tide and the interpolation of IDW(Inverse Distance Weight) is applied to assume the density distribution of red tide after gather data by using Arc/Info. After IDW interpolation, the sea area occurred over 1,000 cells/ml of red tide density is extracted with CON and SUM Function of Grid Module, and the density of the sea area is accumulated daily. As a result of this study, the distribution condition of red tide is found timely and spacially by applying GIS to the sea area of red tide, the results indicated that the spatial density and the cumulative frequency about the origin of red tide using GIS, the sea area demonstrated that the maximum density and the maximum frequency varied significantly over the Nammyun of Namhae-Is. with the maximum frequency being 49 times. accordingly if data about the areas of red tide will occur from the present are accumulated, the shifting route of red tide occurrence and extinction can be predicted.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.29-39
• /
• 2018

In this study, the applicabilities of flood risk indices using FVI from IPCC, PSR method from OECD, and DPSIR method from EEA, were analyzed. Normalized values of daily maximum rainfall, hourly maximum rainfall, ten minute maximum rainfall, annual precipitation, total days of heavy rainfall (more than 80mm/day), density of population, density of asset, DEM, road statistics, river maintenance ratio, reservoir capacity, supply ratio of water supply and sewerage, and pumping capacity were constructed from 2000 to 2015 for nationwide 113 watersheds, to estimate flood risk indices. The estimated indices were compared to 4 different types of flood damage such as the number of casualties, damage area, the amount of flood damage, and flood frequency. The relationships between flood indices and different flood damage types demonstrated that the flood index using the PSR method shows better results for the amount of flood damage, the number of casualties and damage area, and the flood index using the DPSIR method shows better results for flood frequency.

• Journal of Korea Water Resources Association
• /
• v.51 no.spc
• /
• pp.1149-1159
• /
• 2018

This study aims to predict the future flood damage cost of 113 middle range watersheds using 26 GCM outputs, hourly maximum rainfall, 10-min maximum rainfall, number of days of 80 mm/day, daily rainfall maximum, annual rainfall amount, DEM, urbanization ratio, population density, asset density, road improvement ratio, river improvement ratio, drainage system improvement ratio, pumping capacity, detention basin capacity and previous flood damage costs. A constrained multiple linear regression model was used to construct the relationships between the flood damage cost and other variables. Future flood damage costs were estimated for different RCP scenarios such as 4.5 and 8.5. Results demonstrated that rainfall related factors such as annual rainfall amount, rainfall extremes etc. widely increase. It causes nationwide future flood damage cost increase. Especially the flood damage cost for Eastern part watersheds of Kangwondo and Namgang dam area may mainly increase.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.41-43
• /
• 2005

$Cl_2$ 플라즈마에 있어서 Ar 가스의 첨가에 의한 효과를 보기 위해 Ar 첨가 비율 rf 전력, 반응로 압력을 변화시켜가며 그 에너지와 질량을 분석하였다. Ar 첨가 비율에 따른 각 입자들의 질량 분석을 통해서, Ar의 비율이 80% 일 때 물리적, 화학적 반응이 최대가 되는 것을 확인하였다. 또한 Ar 첨가 비율에 따른 각 이온들의 에너지 분석을 통해, Ar 가스의 첨가에 의해 $Cl^+$ 나 $Cl_2^+$ 이온들의 이온 선속은 증가하나 그 에너지가 감소하는 것을 확인하였다. 반응로 압력과 rf 전력의 제어를 통해 이온 전류밀도, 이온 에너지와 전자온도를 제어 할 수 있음을 확인하였고, Ar 첨가 비율을 변화시키면서 전자 밀도 분포 함수의 변화를 관찰하여 이를 통해 Ar 비율에 따른 이온화 비율과 전자 온도, 밀도 등의 관계를 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.399-400
• /
• 2010

본 논문에서는 고전력 밀도 및 저가형으로 구현이 가능한 새로운 구조의 계통 연계형 태양광 인버터 시스템을 제안한다. 제안된 시스템은 태양전지의 최대 전력점 추종기능과 배터리의 충 방전 기능을 통합하여 기존 3단 구성을 2단으로 줄임으로써 시스템 제작단가가 낮아지고 고전력 밀도 구성이 가능하다. 제안 시스템의 우수성과 신뢰성 검증을 위하여 1.5kW급 PV PCS 시작품을 제작하고 이를 이용한 실험결과를 바탕으로 제안 시스템의 타당성을 검증한다.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.833-839
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene was investigated by small angle light scattering and comparison was made with Ziegler-Natta linear low density polyethylene. The special efforts were made to find out the effects of branching number, length of branching and co-monomer content of m-LLDPE on the crystallization behavior of m-LLDPE. It was found that m-LLDPE has longer induction time to start crystallization from the amorphous state than that of conventional LLDPE with similar branching number, but the rate of crystallization seems not change much in both LLDPEs. Lowering of branching number in m-LLDPE resulted in both increasing of rate of crystallization and reducing induction time to crystallize. In general, the maximum size of spherulites of m-LLDPE is bigger than that of conventional LLDPE.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.231-231
• /
• 1999

PDP(Plasma Display Panel)는 21세기 디스플레이 시장을 대체할 차세대 디스플레이 장치로서 넓은 시야각, 얇고, 가볍고, 메모리기능이 있다는 여러 가지 장점들을 가지고 있지만 현재 고휘도, 고효율, 저소비전력 등의 문제점들을 해결하여야 한다. 이러한 문제점들의 해결을 위해서는 명확한 미세방전 PDP 플라즈마에 대한 정확한 진단 및 해석이 필요하다. 따라서 본 연구에서는 미세 면방전 AC-PDP 플라즈마의 기초 변수들 (플라즈마 밀도 & 온도, 플라즈마 뜬 전위, 플라즈마 전위 등의 측정을 통해 고휘도, 고효율 PDP를 위한 최적의 방전환경을 알아내는 데 있다. 일반적으로 전자의 밀도는 방전전류에 비례하는 관계를 보인다. 전류에 대해 방전전압이 일정하다면 전자밀도가 커짐에 따라서 휘도는 포화되며 상대적으로 휘도와 전류의 비로 표시되는 발광효율은 감소하게 된다. 반면 전자밀도가 상당히 작다면 휘도는 전자밀도에 비례하고 효율은 최대값을 보인다. 따라서 미세구조 PDP에서 휘도와 발광효율, 양쪽에 부합하는 최적의 방전환경을 플라즈마 전자밀도와 온도의 측정을 통해서 해석하는 것이 필요하다. 본 실험에서는 방전기체의 종류와 Ne+Xe 방전기체의 조성비에 따른 플라즈마 밀도, 온도의 공간적인 분포특성을 진단하기 위해서 초미세 랑뮈에 탐침(지름: 수 $mu extrm{m}$)을 제작하였다. 제작된 초미세 탐침을 컴퓨터로 제어되는 스텝핑모터를 장착한 정밀 X, Y, Z stage에 부착하여서 수 $\mu\textrm{m}$간격의 탐침 삽입위치에 따라서 미세면방전 AC-PDP의 플라즈마 밀도 및 온도분포 특성을 진단하였다. PDP 방전공간에 초미세 랑뮈에 탐침을 삽입해서 -200~+200V의 바이어스 전압을 가해준다. 음의 바이어스 전압구간에서 이온 포화전류를 얻어내어 여기서 플라즈마 이온 밀도를 측정하고 양의 바이어스 전압구간에서 플라즈마 전자온도를 측정하면 미세면방전 AC-PDP 플라즈마의 기초 진단이 가능하다.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.401-415
• /
• 1998

This paper reports the results obtained from the Langmuir probe (LP) and Electron Temperature Probe (ETP) experiments on the sounding rocket KSR-II (Korean Scientific Rocket - II) which was launched on Jun 11, 1998 at 10:00 KST from Tae-An peninsula (37$^{\circ}$ N, 126$^{\circ}$ E). The instruments successfully measured the electron density, electron temperature, and the floating potential at altitudes of 73km to 130km. While the electron temperature measurement is not easy in this region, since the temperature is very low and the contamination effect of the probe may give rise to a problem, we were able to obtain a reasonable electron temperature profile by employing two independent methods, the pulse modulated Langmuir Probe and Electron Temperature Probe. The preliminary results show that electron density increases sharply at about 90km, and forms a peak at 102km. The density profile is roughly consistent with IRI (International Reference Ionosphere)95-model or PIM (Parameterized Ionospheric Model) results except that the peak density appears at 110km in the model and model electron density is slightly lower than the observed one. Electron temperature obtained from ETP fluctuates between 200$^{\circ}$K and 700$^{\circ}$K, an effect presumably coming from the wakes developed by LP, and it tends to increase with the altitude, which is consistent with the LP results.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.187-196
• /
• 2005

From the line ratios of Si III] 1892 to C III] 1909 (Feibelman & Aller 1987), we estimated the BLR electron densities and their changes of Seyfert 1 galaxy NGC 7469 using IUE spectra observed from June 11 to July 29, 1996 (Wanders et al. 1997). We separated blended Si III] and C III] lines using the STARLINK/DIPSO and measured their fluxes within the error of $12.4\%\;and\;6.6\%,$ respectively. Electron density fluctuated from $10^{9.69}\;to\;10^{10.93}$ during about two month period, i.e. 17.3 times density variation within 50 days. We also derived time delays from UV emission line variations .elative to the continuum $(at\;1315{\AA}):$ 2 days for C IV, 4 days for C III], 8 days for Si III]. This suggests that their stratified UV line emission regions are at 0.002 pc, 0.004 pc and 0.006 pc, respectively, from the central region. Based on the BLR sizes and their rotation velocities deduced from the line profiles, we estimate the central black hole mass as about $10^6M_{\odot}$