• Title/Summary/Keyword: 최대전력부하

Search Result 329, Processing Time 0.038 seconds

Compensation Algorithm Rotor Parameter Variation for I.M Using Fuzzy Logic Controller (퍼지논리제어기를 이용한 유도전동기 회전자 상수변동 보상제어기법)

  • 류경윤;이홍희
    • Proceedings of the KIPE Conference
    • /
    • 1999.07a
    • /
    • pp.531-534
    • /
    • 1999
  • 벡터제어기법은 유도전동기의 무부하 시험 및 구속시험 등을 통하여 구한 고정자 및 회전자 상수를 이용한 전동기의 수학적 모델을 기초로 하여 이루어진다. 따라서 유도전동기의 수학적 모델을 구성하는 고정자 및 회전자 상수의 정확성은 곧 벡터제어의 성능과도 직결된다. 하지만, 온도 상승 등의 영향으로 회전자 저항값은 정상치보다 최대 80∼100%까지 상승 할 수 있으며, 이는 벡터제어의 특성을 저하시키는 요인이 된다. 따라서, 본 연구에서는 회전자 저항을 이용하는 자속 PI제어부를 회전자 저항을 사용하지 않는 자속 퍼지제어부로 대체하고 측정한 3상 전류를 이용하여 회전자 저항값의 변화를 실시간으로 추정·보상하는 퍼지추론기를 구성하므로써 회전자 저항의 변화에도 최적의 효율 및 성능을 가지는 보완된 벡터 제어 기법을 개발하였다.

  • PDF

KPX Operating Study Summer 2008 (2008년도 하절기 전력계통 구성방안)

  • Oh, Chang-Soo;Cho, Jong-Man;Song, Suk-Ha
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.282-283
    • /
    • 2008
  • This paper presents a overall study results for the Korea power system at yearly peak load time in 2008 summer period. The power system become more complex due to the gradual increase of power demand. We analyze the problems in power system operation, by the use of PSS/E(power flow, fault and transient stability study) and VSAT for voltage stability. The results of establishment of power system operating plan and countermeasure are described.

  • PDF

Fabrication and characterization of piezoelectric wide band energy harvesters using low frequency vibrations (저주파 진동을 이용한 압전 구동 방식의 광대역 에너지 수확 소자 연구)

  • Cho, Hyunok;Halim, Miah A.;Park, Jae Yeong
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.1227-1228
    • /
    • 2015
  • 본 연구에서는 기계적 충격 방식을 통한 주파수 상향방식을 이용하여 저주파 진동원으로부터 충분한 에너지를 수확할 수 있는 압전 구동 방식의 광대역 에너지 수확 소자를 제작하고 평가하였다. 유연한 외팔보의 진동으로 인한 기계적 충격은 압전 외팔보에 큰 두 번째 힘을 전달한다. 변형률이 커지고 주파수 상향방식을 사용한 결과로 출력 전력과 동작 주파수의 대역폭 또한 향상되었다. 제작된 에너지 수확소자의 질량체 비율은 ${\mu}=5.8$, 스토퍼의 거리는 d = 0.5 mm이며, 17 Hz의 주파수, $30k{\Omega}$의 최적 부하저항에서 $449{\mu}W$의 최대 피크 전력을 전달하였다. 또한 1 g로 가진하였을 때 11 Hz부터 28 Hz의 주파수 대역에서 동작이 가능하였고, 저주파수의 무작위 진동에서도 효율적으로 에너지 수확이 가능하다는 것을 입증하였다.

  • PDF

The Convergence of Electric Power Technology and USN Technology:A Trend Analysis of USN Based AMI Service and Technology (USN 기반 AMI 서비스 및 기술동향:전력 산업과 USN 산업의 융합기술)

  • Kim, S.J.;Seo, J.H.;Jun, J.A.;Pyo, C.S.
    • Electronics and Telecommunications Trends
    • /
    • v.23 no.5
    • /
    • pp.67-78
    • /
    • 2008
  • 환경 및 에너지 자원의 보호 일환으로 세계 각국에서 도입이 적극 검토되는 AMI는 에너지를 효율적으로 관리할 수 있는 서비스로, 소비자에게 실시간으로 에너지 사용량 정보가 제공되어 소비자 스스로 혹은 자동화된 기기 제어를 통해 에너지 사용을 제어함으로써 가정 및 기업의 에너지 비용을 절감할 수 있다. 또한 유틸리티 회사들 역시 검침 및 유지관리 비용의 절감뿐만 아니라 요구 응답과 에너지 부하 제어를 통해 피크 때의 최대 출력을 줄임으로써 에너지 생산 비용 혹은 추가적인 인프라 확장을 방지하는 효과를 기대할 수 있다. AMI 시스템 구축에 유용한 것으로 평가되는 USN 기술과 전력 기술을 융합한 USN 기반 AMI 서비스는 국내 에너지 효율 향상과 세계 AMI 시장 선점을 위해 연구개발이 필요하다. 본 고에서는 AMI 서비스 시장전망과 기술동향, 국내외 시범사업과 적용사례를 살펴본다. 마지막으로 AMI 제공을 위한 주요 기술들을 비교 분석하고, USN 기반 AMI의 국내적용에 대한 기회 및 위험을 살펴보기로 한다.

Analysis and Experiment of VS(Vertical Stabilization) Converter Controller for International Thermonuclear Experimental Reactor (국제 핵융합실험로용 VS(Vertical Stabilization) 컨버터 제어기 해석 및 실험)

  • Jo, Hyunsik;Oh, Jong-Seok;Cha, Hanju
    • Proceedings of the KIPE Conference
    • /
    • 2014.07a
    • /
    • pp.239-240
    • /
    • 2014
  • 본 논문에서는 국제 핵융합실험로용 VS 컨버터 제어기 해석 및 실험에 대하여 서술하였다. VS 컨버터는 플라즈마의 수직 안정성을 제어하기 위해서 ${\pm}1000V$의 정격전압과 최대 ${\pm}25kA$의 전류를 공급해야 하며, 영 전류구간이 없이 4상한 운전을 수행할 수 있어야 한다. 이를 위해서 부하전류의 크기에 따른 동작모드 구분과 순환전류제어기, 차전류 제어기가 요구되며 싸이리스터의 소자 특성에 의하여 발생하는 중복각 보상과 싸이리스터의 전류실패를 방지하는 감마제어가 포함이 된 점호각이 보장 되어야 한다. 본 논문에서는 국제 열핵융합실험로용 VS 컨버터 제어기를 해석하고, 실제 제어기와 RTDS를 연동하여 9ms의 순환전류 제어기 응답성과 계통에 50% 새그가 발생하였을 때 전류실패를 방지하는 감마제어의 타당성을 실험으로 확인하였다.

  • PDF

KPX Operating Study Summer 2007 (2007년도 하절기 전력계통 운영방안)

  • Hwang, Bong-Hwan;Shin, Yong-Son;Cho, Jong-Man;Song, Seok-Ha
    • Proceedings of the KIEE Conference
    • /
    • 2007.07a
    • /
    • pp.427-428
    • /
    • 2007
  • This paper presents a study for the Korea power system at yearly peak load time in 2007 summer period. The power system become more complex due to the gradual increment of power demand. We analyze various problems in power system operation, by the use of PSS/E(power flow, fault and transient stability study) and VSAT for voltage stability. The results of power system operating plans and countermeasures are described.

  • PDF

The controller design of parallel grid connected inverters for seamless mode transfer (병렬형 계통연계 인버터의 seamless 모드 절환을 위한 제어기 설계)

  • Song, Injong;Choi, Junsoo;Choi, Jaeho
    • Proceedings of the KIPE Conference
    • /
    • 2018.11a
    • /
    • pp.151-152
    • /
    • 2018
  • 본 논문에서는 병렬연결 인버터의 seamless mode transfer를 위한 제어기 설계를 수행하였다. 인버터의 경우 계통연계 모드에서는 전류원으로 동작하기 때문에 간접전류를 기반으로 제어를 실행하였고, 단독 운전에서는 인버터가 전압원으로 간주되기에 전압 제어가 필요하다. 또한 여러 대의 분산 발전원에 대해 동일 부하 분담을 위해 드룹제어를 이용하였다. 이러한 제어기들은 PR제어를 기반으로 하여 특정 주파수에 높은 이득을 가지게 하여 제어효율을 향상시켰다. 모드 변환 과정에 있어 전압의 변동을 최대한 줄이기 위한 제어 계획을 수립하였고, 이를 Psim 시뮬레이션으로 증명하였다.

  • PDF

Development of Electric Power Management System for Electric Furnace (전기로 전력관리 시스템 개발)

  • Min, Byeong-Yong;Kim, Ho-Jin;Kwon, Yong-Hoon
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2013.05a
    • /
    • pp.904-907
    • /
    • 2013
  • Demand Controller is a control device that if current electric power consumption seems to exceed the targeted amount of electric power, block the connected load devices. When this ON/OFF way is applied to electric power management of electric furnace, start and stop operation of inverter and an electric heater which supplying electric power is being performed repeatedly. This has a problem of life-shortening of inverter and an electric heater by electrical damage. In addition, when electric power supplying is blocked, attemperation is not allowed until return to normal operation condition. In this paper, we develop power management system for electric furnace using the electric furnace remote controller. This system provides the automatic control for approved electric power to electric furnace organically and prevent electric damage of inverter and an electric heater through continuous electric power supply within the targeted amount of electric power.

  • PDF

Effects of HTS Cable Applied to the Voltage Stability Limited Power System (전압 안정도 제약계통에 대한 고온초전도 케이블 적용효과)

  • Lee, Geun-Joon;Hwang, Si-Dol
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.18 no.5
    • /
    • pp.169-173
    • /
    • 2004
  • This paper presents the basic application idea of superconductor cable for voltage stability limited power system. In bulk power system, the transfer capability of transmission line is often limited by the voltage stability, and superconductor cable could be one of the countermeasure to enhance heat transfer limit as well as voltage stability limit. Steady state voltage stability approach by P-V curve is used to calculate the maximum transfer capability of initial system and superconductor applied system. IEEE-14 bus system is used to demonstrate its applicability.

A Study on the Assessment of a Reasonable Transformer Capacity by the Improvement of Diversity Factor (부등률 적용 개선을 통한 변압기의 적정용량 산정에 관한 연구)

  • Seo, Seung-Kwan;Oh, Yong-Taek;Kim, Se-Dong;Shin, Wha-Young;Yoo, Sang-Bong;Lee, Jin
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.8
    • /
    • pp.15-20
    • /
    • 2010
  • This paper shows a reasonable diversity factor, that was made by the systematic and statistical way considering actual conditions, such as investigated contract power and peak power for the last 5 years of each customer for 20 Lease Apartment. In this paper, it is necessary to analyze the key features and general trend from the investigated data. It made an analysis of the feature parameters, such as average, standard deviation, median, maximum, minimun and thus it was carried out by the linear and nonlinear regression analysis. The standards of demand, diversity, and load density are necessary to create the design of a transformer capacity that is seldom presented in terms for academic study.