• Proceedings of the KWS Conference
• /
• 2004.05a
• /
• pp.60-62
• /
• 2004

TIG 용접에서 용입과 비드가 형성되어 가는 물리적 아크 현상을 이해함에 있어서 아크 압력은 매우 중요한 인자 중의 하나이다$^{1.2)}$ . 기존의 연구에서는 저전류나 중전류 영역의 TIG 용접에서 텅스텐 전극의 선단각과 용입 형태와의 관계를 플라즈마 기류 등에 고찰하였고, 최대 아크압력에 미치는 전극형상의 영향 등을 연구하였다. (중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.403-406
• /
• 2002

가정용 및 산업용으로 사용되고 있는 천연가스는 70kg/cm1의 압력으로 지하에 매설되어 있는 API 5L X65재질의 배관을 통하여 공급되고 있다 생산기지에서 공급되는 압력이 70kg1cmr이지만 가스소비량에 따라 계절별 및 월별 가스 내압이 변화되고 있다. 하루에도 최대 2회정도 주기적으로 변화를 보이고 있다. 본 연구에서는 API 5L X65등급의 가스배관 모재 및 용접부에 일정한 형태의 가우지 결함을 가공하여 현재 사용중인 내압 조건과 유사한 내압변화를 재현하여 피로수명을 평가하였다.(중략)

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.1-6
• /
• 2012

Using the Siwek 20 L spherical explosion vessel, the explosion properties have been examined to understand the influence of magnesium content in Mg-Al alloy dusts with different concentration. For this purpose, the Mg-Al alloy dusts (volume mean diameter : $151{\sim}160{\mu}m$) with magnesium content ratio were used. As the results, the increase of Mg content in Mg-Al alloy causes an decreased minimum explosion concentration and an increased maximum explosion pressure. Also the maximum explosion pressure and maximum rate of pressure rise in Mg-Al alloy dusts mainly depended on the dust concentrations. However, for the explosion index (Kst) of Mg-Al (40:60 wt%), Mg-Al (50:50 wt%) and Mg-Al (60:40 wt%), it was founded to increase the Kst with increasing of magnesium content ratio.

• Nuclear Engineering and Technology
• /
• v.19 no.1
• /
• pp.10-21
• /
• 1987

Uncertainty analysis of the FLB accident is performed for KNU-1 using the response surface methodology and Monte Carlo simulation. The FLB analyses using the RELAP4/Mod6 were performed a number of times to generate the data base for the uncertainty analysis, along with the EM calculation for comparison purpose. Two kinds of input sets are utilized for response surface method to investigate and compare the effects of the uncertainty of input variables on the RCS peak pressure following a FLB. The first set is composed of six major plant operational parameters and the second set is composed of five major modelling parameters. It is found through the analysis of results that the uncertainties of modelling parameters have more influence on the RCS peak pressure than the uncertainties of plant operational parameters and that the extra margin of 9% of peak pressure is gained. And one of the assumptions of EM calculation, which is usually accepted as conservative is found to be erroneous, that is, the initial core inlet temperature is found to act negatively on the RCS pressure following a FLB.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.355-361
• /
• 2014

Steam explosions can be caused by fuel-coolant interactions resulting from failure of the external vessel cooling system in a new nuclear power plant. This can threaten the integrity of structures, including the nuclear reactor and the containment building. In the present study, an improved technique for analyzing the steam explosion phenomenon was proposed on the basis of previous research and was verified by simulations involving alumina experiments. Also, the improved analysis technique was applied to determine the pressure history of the reactor cavity in accordance with postulated failure locations. The results of the analysis revealed that the effects of vessel side failure are more serious than those of vessel bottom failure, with approximately 70% higher maximum pressure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2017

The performance of a MEMS solid propellant thruster was predicted and analyzed through internal ballistics model and CFD analysis. The nozzle throat was $416{\mu}m$, and the area ratio of the nozzle was 1.85. As a result of the internal ballistics model, chamber pressure increased up to 197 bar and the maximum thrust was 3,836 mN. In CFD analysis, the chamber pressure of the internal ballistics model was applied as the operating pressure, and the CFD model was divided into an adiabatic and a heat loss model. As a result, the maximum thrust of the adiabatic model was 14.92% lower than that of the internal ballistics model, and the effect of heat loss was insignificant.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.678-681
• /
• 1995

가속수명시험은 매우 신뢰성이 높은 제품의 수명분포에 대한 정보를 빨리 얻기 위해 사용된다. 이때, 빠른 시간안에 정보를 얻기 위해 제품의 사용조건보다 높은 스트레스 즉 온도, 압력, 전압, 진동등을 사용하여 시험을 하게 되는데 최대 시험 스트레스는 미리 실험자에 의해 선택되게 된다. 그러나 주어진 최대 시험 스트레스가 스트레스의 한계범위를 벗어나는 경우에는 사용조건과 다른 고장구조가 발생할 수 있고, 이로 인하여 편의가 큰 신뢰수명의 추정치를 얻을 수 있다. 기존의 논문에서는 실험자의 경험 또는 사전시험을 통해 미리 설정된 최대 시험 스트레스하에서 제품수명의 표준편차를 최소화하기 위한 최적가속수명시험 설계방법을 제시하였다. 그러나 본 논문에서는 와이불 분포에서 1) 사용조건에서의 수명추정치의 분산 .leq. k, 2) 스트레스의 범위를 벗어나지 않는 최대 시험 스트레스의 최소값을 구하는 설계방법을 제시하고, 또한 구한 스트레스에서의 수명 및 최소 시험 스트레스에서 시험되어야 할 제품의 수를 추정한다. 이때, 사용전압에서의 수명을 계산하기 위하여 inverse power law 모형을 도입하였으며, type I censoring 방법을 사용하여 수명 데이타들은 모든 제품이 고장나기 전에 분석될 수 있도록 하였다.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.117-126
• /
• 2009

The purpose of this study was to investigate the effects of 12-week complex training program on foot pressure patterns of the elderly women. The training program consisted of aerobic exercise and muscular training for 12 weeks. Two stages of walking were given to the participants before and after treatment: (a) straight walking; and (b) turn at $45^{\circ}$ while walking. Data related to foot-pressure distribution(FPD) while walking were collected from each stage and analyzed. Results indicated that in both stage of walking, the mean of the foot pressure(FP) was significantly reduced after the participation in the program. Results also revealed that in all stages, the patterns of the FPD and the center of pressure(COP) were widely lower and more stable. Based on the results of this study, it was concluded that participating in a 12-week complex program bas impact on the gait patterns of the elderly women, reducing the foot pressure on their shoes.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.318-328
• /
• 2007

This study was carried out to evaluate the performance of the separate membrane (HF; hollow fiber membrane with polysulfone) process applied with the external membrane types, internal pressure membrane types and external-internal types according to the variations of pressure and membrane pore size in the purification treatment process of the lake water. The maximum permeate flux was average values of 282 LMH and 234 LMH with the pore size of 0.3 and 0.05 ${\mu}m$ respectively in the external pressure membrane process, and 443 LMH and 522 LMH with the pore size of 0.3 and $0.05{\mu}m$ respectively in the internal pressure membrane process. In addition, the maximum permeate flux of the process that was applied with external and internal membrane pressure simultaneously showed the average values of 674 LMH with the pore size of $0.3{\mu}m$, and 648 LMH with the pore size of $0.05{\mu}m$. Therefore, maximum yield per unit area is supposed when the separate membrane that was applied with external and internal pressure simultaneously are used to treat the lake water.