• Korean Journal of Environment and Ecology
• /
• v.4 no.1
• /
• pp.63-68
• /
• 1990

User's impacts on trail deteriorations and edge vegetation were studied in Sokri Mountain National Park in 1990. The entire width, bare width and maximum depth of trail as the trail condition were significantly greater on the more heavily used trail. Deteriorations of trail which were surveyed at the total of 52 were significantly different from those of non-deteriorated points. The dominant trees in the crown layer of trail edge are as follows. According as the altitude rises, the changes happen from Quercus serrata to Quercus variabilis, Pinus densiflora, and to Quercus mongolica at Joongsajaam course, and from Pinus densiflora, Quercus variabilis to Quercus mongolica at Birosanjang course. And Stephanandra incisa, Symplocos chinesis for. pilosa show high relative dominant value at Joongsajaam course, Lindera obtusiloba, Fraxinus sieboldiana show one at Birosanjang course.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1805-1810
• /
• 2015

Increasing of depth data accessibility, depth data is used in many researches. Motion recognition of computer vision also widely use depth image. More accuracy motion recognition system needs more stable depth data. But depth sensor has a noise. This noise affect accuracy of the motion recognition system, we should noise suppression. In this paper, we propose using spatial domain and temporal domain stabilization for depth image and makes it hardware IP. We adapted our hardware to floor removing algorithm and verification its effect. we did realtime verification using FPGA and APU. Designed hardware has maximum frequency 202.184MHz.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.51-58
• /
• 2012

Recently, 3D technology based on depth image is widely used in various fields including 3D space recognition, image acquisition, interaction, and games. Depth camera is used in order to produce depth image, various types of effort are made to improve quality of the depth image. In this paper, we suggests using area-based Canny edge detector to improve depth image in applying 3D technology based on depth camera. The suggested method provides improved depth image with pre-processing and post-processing by fixing image quality deterioration, which may take place in acquiring depth image in a limited environment. For objective image quality evaluation, we have confirmed that the image is improved by 0.42dB at maximum, by applying and comparing improved depth image to virtual view reference software. In addition, with DSCQS(Double Stimulus Continuous Quality Scale) evaluation method, we are reassured of the effectiveness of improved depth image through objective evaluation of subjective quality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2023

Purpose: The purpose of this study is to analyze the prognostic factors related to tooth loss after 5 years of periodontal surgery in periodontal disease patients. Materials and Methods: From January to December 2017, 22 patients and 124 teeth who underwent periodontal treatment through periodontal surgery were targeted. At the time of treatment, the measured values were evaluated after recording the maximum probing depth, average periodontal probing depth, number of root, furcation involvement, pulp vitality, and prosthesis state on the day of periodontal surgery. Based on the initial records at the time of visit, patient-related factors were gender, age, smoking, tooth loss due to periodontal disease at the time of first visit, diabetes, and maintenance period. The influence of each factor on tooth loss was evaluated. Results: As a result of examining the influence of tooth-related factors on tooth loss, the maximum probing depth depth (P: 0.000), bone loss (P: 0.021) was found to have a significant effect on tooth loss. Conclusion: As a result of examining the influence of patient-related factors on tooth loss, any variables had no significant effect. Bone loss, maximum probing depth acted as statistically significant prognostic factors for tooth loss in patients who underwent periodontal surgery.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.179-187
• /
• 2017

The design provisions for the maximum steel ratio in reinforced concrete flexural members is normally provided to ensure sufficient ductility and economy by steel yielding at member failure. In the Concrete Structural Design Code (2012), the maximum steel ratio is expressed in terms of a net strain in tensile steel, and leading to very high steel ratio in the case of using high strength materials. Thereby, this may result in difficulty to satisfy a required workability at concrete placing. On the contrary, in the Korean Highway Bridge Design Code (Limit State Design) the maximum steel ratio is given in terms of the maximum neutral axis depth ratio that is 0.4. From these results, a rational model for the maximum steel ratio is suggested so as to satisfy a ductility as well as a workability.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.63-66
• /
• 2006

양안시차를 이용한 입체 디스플레이는 입체감과 편안함이 상충하는 특징이 있다. 본 논문에서는 이를 해결하기 위해 영상 특성에 따른 길이 조절을 통해 인지되는 입체감을 최대한 떨어뜨리지 않으면서 불편함을 최소화하는 방법을 연구하였다. 인간이 입체를 인지하는 기저는 상당히 복잡하며 영상의 여러 형태에 따라 동일한 깊이(양안시차, disparity)를 주는데도 입체감과 편안함이 다르게 인지된다. 따라서 영상 형태에 따라 다르게 인지되는 영향 인자를 선정하고 이에 대한 깊이감과 편안함의 관계를 실험을 통해 분석하여 적합한 값을 얻었다. 이를 표시되는 입체 디스플레이에 적용하여 들어오는 영상을 처리하여 영향 인자의 정도를 구하고 이에 따라 깊이가 조절(Depth Scaling)되도록 하여 편안한 입체 영상을 구현하였다.

• Korean Journal of Agricultural Science
• /
• v.23 no.1
• /
• pp.13-24
• /
• 1996

The following results were obtained by analyzing the displacement, strain and stability of ground at the soft ground excavation using sheet pile. 1. Before setting the strut, the horizontal displacement was large on the upper part of excavated side, but after setting the strut, it showed concentrated phenomenon while being moved to go down to the excavated side. 2. After setting the strut, the displacement of sheet pile was rapidly decreased about a half compared with before setting the strut. The limitation of excavation depth was shown approximately GL-8m after setting double stair strut. 3. Maximum shear strain was gradually increased with depth of excavation, and local failure possibility due to shear deformation at the bottom of excavation was decreased by reinforcement of strut. 4. Maximum horizontal displacement of sheet pile at GL-7.5m was shown 0.2% of excavation depth in elasto-plastic method, and 0.6% in finite-element methods, and the maximum displacement was occurred around the bottom of excavation. 5. To secure the safety factor about penetration depth in the ground of modeling, D/H should be more than 0.89 in the case of one stair strut, and more than 0.77 in the case of double stair strut. 6. The relation of safety factor and D/H about the penetration depth was appeared, Fs=0.736(D/H) + 0.54 in the case of one stair strut, and Fs=0.750(D/H) + 0.62 in the case of double stair strut.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.175-177
• /
• 2010

본 논문에서는 MPEG 의 3차원 비디오 시스템의 표준 깊이정보 맵에 대한 효율적인 부호화를 위하여 전처리 방법을 제안한다. 현재 3차원 비디오 부호화(3DVC)에 대한 표준화가 진행 중에 있지만 아직 깊이정보 맵의 부호화 방법에 대한 표준이 확정되지 않은 상태이다. 제안하는 기법에서는 우선, 입력된 깊이정보 맵에 대하여 원래의 히스토그램 분포를 가우시안 혼합모델(GMM)기반의 EM 군집화 기법에 의한 방법으로 분리 후, 분리된 히스토그램을 기반으로 깊이정보 맵을 여러 개의 영상으로 분리한다. 그 후 분리된 각각의 영상을 배경과 객체에 따라 다른 조건의 mean shift filter로 필터링한다. 결과적으로 영상내의 각 영역 경계는 최대한 살리면서 영역내의 화소 값에 대해서는 평균 연산을 취하여 부호화시 효율을 극대화 하고자 하였다. 실험조건은 $1024{\times}768$ 영상에 대해서 50 프레임으로 H.264/AVC base 프로파일로 부호화를 진행하였다. 최종 실험결과 bit rate는 대략 23% ~ 26% 정도 감소하고 부호화 시간도 다소 줄어드는 것을 확인 할 수 있었다.

• The Korean Journal of Rheology
• /
• v.10 no.2
• /
• pp.65-73
• /
• 1998

본연구에서는poystyrene-block-poly (ethlene-co-butylene)-block-polystyrene(SEBS) 삼중블록 공중합체와 저분자량 단일중합체인 Hercotac 1149 (H1149)의 70/30 (w/w) 혼합물 의 미세상분리와 그동력학을 유변물성 측정법과 SAXS 실험을 통하여 연구해 보았다. 먼저 혼합물의 미세상분리 온도를 유변물성 측정법과 SAXS 실험을 통해 각각구한 다음 샘플을 미세상분리 온도보다 높은 온도에서 그이하의 온도로 급냉시킨 후 유변물성과 산란강도의 사간에 따른 변화로부터 미세상분리 동력학에 대한 정보를 구하였다. 이렇게 얻어진 데이터 를 Avrami 형태의 핵생성 성장(NG) 메커니즘으로 해석해 보았는데 최대산란강도 Imax 뿐만 아니라 저장 점탄성계수 G＇과 손실 점탄성계수 G＂의 시간에 따른 변화를 잘 예측할수 있 었다. 한편 서로다른 두 time-resolved 실험으로부터 Avrami 플롯을 그려서 구해진 Avrami 변수들은 같은 급냉 깊이에서는 서로 잘 일치함을 확인하였다. 반감기는 급냉 깊이가 증가 함에 따라 점차 감소하는 경향을 보였는데 이는 급냉 깊이가 클수록 미세상분리가 더 빨리 진행되고 있음을 보여주는 것이다. 또한 Avrami 지수는 급냉 깊이가 증가함에 따라 3에서 4로 급격히 변했는데 이로부터 급냉 깊이가 작을 때에는 70/30 (w/w) SEBS/H1149 혼합물 의 미세상분리가 불균일 핵생성 성장 메커니즘에 따라 진행되고 급냉 깊이가 더 커지면 미 세상분리가 스피노달 상분리 메커니즘으로 변하고 있음을 예측할수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.639-646
• /
• 2022

Landing site searching algorithms are developed for a quadrotor using a depth map in unknown environment. Guidance and control system of Unmanned Aerial Vehicle (UAV) consists of a trajectory planner, a position and an attitude controller. Landing site is selected based on the information of the depth map which is acquired by a stereo vision sensor attached on the gimbal system pointing downwards. Flatness information is obtained by the maximum depth difference of a predefined depth map region, and the distance from the UAV is also considered. This study proposes three landing methods and compares their performance using various indices such as UAV travel distance, map accuracy, obstacle response time etc.