• Journal of the Korean Ceramic Society
• /
• v.28 no.1
• /
• pp.19-19
• /
• 1991

Fracture of Al2O3 tubes for different loading path under combined tension/torsion was investigated. Macroscopic directions of crack propagation agreed well with the maximum principal stress criterion, independent of the loading path. However, fracture strength from the proportional loading test(τ/σ= constant) showed either strengthening or weakening compared to that from uniaxial tension, depending on the ratio τ/σ. The Weibull theory was capable to predict the strengthening of fracture strength in pure torsion, but not the weakening in the proportional loading condition. The strengthening or weakening of fracture strength in the proportional loading condition was explained by the effect of shear stresses in the plane of randomly oriented microdefects. Finally, a new empirical fracture criterion was proposed. This criterion is based on a mixed mode fracture criterion and experimental data for fracture of Al2O3 tubes under combined tension/torsion. The proposed fracture criterion agreed well with experimental data for both macroscopic directions of crack propagation and fracture strengths.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.249-249
• /
• 2011

본 연구에서 AFDA(Approximate Full Distribution Approach)를 사용하여 하수관의 성능불능확률(Probability of capacity failure)을 정량적으로 산정할 수 있는 신뢰성 모형이 개발되었다. 전국 여러 도시의 연 최대강우강도(Yearly Maximum Rainfall Intensity)를 이용하여 그 확률분포함수를 규명하였고 우수관(Storm sewer)의 성능불능확률 산정을 위한 신뢰성모형에 적용하였다. 본 연구에서는 우수관의 성능불능확률을 산정하여 신뢰성 해석을 수행하였다. 먼저 적용도시의 강우자료를 면밀히 분석하고 연 최대강우강도의 통계적 특성을 분석하여 신뢰함수를 구축하였으며 우수관의 성능불능확률 산정을 위한 신뢰성 모형이 개발되었다. 그리고 우수관에 적체되는 토사의 깊이에 따라 우수관의 용량을 산정하였다. 재현기간별 강우강도를 사용하여 청주와 춘천의 원형우수관의 성능불능확률을 산정한 결과, 재현기간의 증가에 따란 성능불능확률을 급하게 상승하는 것을 알 수 있었다. 5년, 10년, 20년 재현기간에 따른 연 최대강우강도를 사용하여 청주와 춘천의 우수관의 성능불능확률을 산정하였다. 또한 토사의 적체에 따른 우수관 유효면적의 변화를 고려하여 두 도시의 우수관의 성능불능확률을 산정하였다. 원형 우수관의 성능불능확률을 산정한 결과, 토사의 적체에 따라 우수관의 용량은 감소하여 성능불능확률이 크게 증가하는 것을 확인 할 수 있었다. 따라서 우수관의 용량 감소를 막고 성능불능확률을 최소화하기 위해 우수관에 적체된 토사의 양을 예측할 수 있는 연구가 필요하며 적체된 토사와 콘크리트나 강관벽면이 복합된 우수관에 대한 조도계수를 보다 더 정확히 정량화 할 수 있는 연구가 수행되어야 할 것이다.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.79-89
• /
• 1995

Two-element plate concept is incorporated into the buckling problem in order to simplify the nonlinear distribution of stress through the thickness of plate. Finite element formulations and programs based upon the Reissner functional and the modified Reissner functional using two-element plate concept are developed for buckling analysis of plates under axial compression. The two programs have been applied to obtain the linear elastic buckling behavior of axially compressed flat plates. Excellent agreement of linear elastic-solution results with exact or approximate solutions of other authors for the same boundary conditions proves the validity of the finite element method using two-element plate theory.

• Composites Research
• /
• v.21 no.4
• /
• pp.22-28
• /
• 2008

The composite joint has become an important research area because the structural efficiency of a structure with a joint is determined by its joints rather than by its basic structure since the joints are often the weakest areas in composite structures. In this paper, the strengths of adhesive joints consisting of metal and composites were predicted and tested by the maximum strain theory and damage zone theory. Nonlinear finite element analyses of adhesive Joints considering the material nonlinearity of the adhesive layer were performed. From the tests and analyses, the strengths of the adhesive joints could be predicted to within 22.2% using the damage zone ratio.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.671-684
• /
• 2022

This study verified the stability of a high-strength combined buried pile retaining wall and its applicability in the field. A cast-in-place (C.I.P) retaining wall and the high-strength combined embedded pile retaining wall were compared and analyzed numerically. The numerical analysis assessed the ground behavior and stability (and thus field applicability) of a high-strength combined buried pile retaining wall using data measured in the field. The experimental results showed that the cross-sectional force and displacement of the high-strength bonded pile retaining wall were reduced by 13.6~19.7%, the shear force increased by 0.7~4.7%, and the bending moment increased by 4.5~8.8% relative to the values for the C.I.P retaining wall. Examination of the amount of subsidence in the ground around the excavation showed that the maximum settlement of the C.I.P retaining wall was 46.89 mm and that at the high-strength combined buried pile retaining wall was 39.37 mm. Overall, designing a high-strength combined embedded pile retaining wall by applying the maximum bending moment and shear force calculated using the elastic beam method to the site ground was shown to achieve the safety of all members, as member forces were generated within the elastic region.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.37-44
• /
• 2008

At low normal stress levels, tensile strength of sand characteristically varies with either saturation or suction of soil in an up-and-down manner with a peak tensile strength that can occur at any degree of saturation. A theory that accurately predicts tensile strength of wet sand was presented in the previous study. In this study, the results of uniaxial tensile, suction-saturation and direct shear tests obtained from three sands (Esperance sand from Seattle, Washington, clean sand from Perth, Australia, and Ottawa sand) are used to validate the proposed theory. The closed form expression of the proposed theory can predict well the experimental data obtained from these sands in terms of the variation patterns of tensile strength over the entire saturation regimes, the magnitude of the tensile strength, its peak value, and the corresponding degree of saturation when the peak strength occurs.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.981-984
• /
• 2008

The super tall building above 100 floors is required that each floor's height is more than 4 meters, and each core wall's thickness is more than 60cm. Therefore, for the successive accomplishment of super tall building, the full scale mock-up test was required. The test results are as follows; Real strength of core wall was satisfied with design strength at 28 days regardless of types of strength, and according to the consolidation effect, lower part's strength was a little higher than upper part's strength. Lateral force of HSC was evaluated with max. $4.5ton/m^2$, and hydration temperature of mock-up test was evaluated that maximun heat of central part revealed about $80^{\circ}C$ at 70MPa and $65^{\circ}C$ at 50MPa, and, the difference between inner and outter part revealed about $30^{\circ}C$ at 70MPa and $12^{\circ}C$ at 50MPa. Also, no crack by hydration temperature was not shown on the surface.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1156-1160
• /
• 2006

본 연구는 빈도별 수문조건하의 2차원 수리해석모형(FLUMEN) 결과를 제공받아 빈도별 침수범람 등을 분석하고, 이로부터 도출되는 침수면적, 최대침수심, 최대유속 등의 특성정보를 이용하여 침수심보다 상대적으로 홍수 위험에 대한 척도를 나타내어 줄 수 있는 홍수 강도(Flood Intensity) 개념을 도입하여 대상유역에 적합한 홍수 위험지표(Flood Hazard Value) 및 홍수 위험도(Flood Risk Map)를 작성하고자 하였다. 본 연구의 대상지역은 안성천 중류부의 평택시 6개동을 포함하는 약 $12.6km^2$의 대상지역으로 2차원 수리해석모형(FLUMEN)의 분석한 시간별 침수심(Flow Depth), 최대침수심과 최대 유속 등의 결과를 ASCII파일의 XYZ값 형태로 제공받아 ArcGis 등을 이용하여 Point Coverage를 만들고, 이로부터 TIN (Triangulated Irregular Network)작업을 수행한 후 대상지역의 최대 침수심도 및 최대 유속분포도 등을 작성하였다. 그리고, 침수예상도 등으로부터 얻어진 침수면적, 최대 침수심, 최대유속 등을 분석하여 침수심과 유속의 함수로 홍수강도를 정의하고 홍수강도와 홍수발생확률의 곱으로 위험지표를 산정하였고, 산정된 홍수 위험지표를 적용하여 홍수 위험도를 작성하였다. 본 연구로부터 도출되는 홍수 위험지표 및 홍수 위험도는 홍수범람에 의한 인명피해 및 재산손실과 이에 대한 복구 및 구호활동에 소요되는 노력 등의 여러 가지 사회..경제적 역기능을 방지하고자 홍수에 의한 침수특성을 이해하고 홍수에 대비한 적절한 홍수방어대책 수립시의 지원 정보로 제공되어 활용될 수 있다.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.359-367
• /
• 2008

TRMM TMI data were used to investigate a relationship between physical parameters from microwave sensor and typhoon intensities from June to September, 2004. Several data such as 85GHz brightness temperature (TB), polarization corrected temperature (PCT), precipitable water, ice content, rain rate, and latent heat release retrieved from the TMI observation were correlated to the maximum wind speeds in the best-track database by RSMC-Tokyo. Correlation coefficient between TB and typhoon intensity was -0.2 - -0.4 with a maximum value in the 2.5 degree radius circle from the center of tropical cyclone. The value of correlation between in precipitable water, rain, latent heat, and typhoon intensity is in the range of 0.2-0.4. Correlation analysis with respect to storm intensity showed that maximum correlation is observed at 1.0-1.5 degree radius circle from the center of tropical cyclone in the initial stage of tropical cyclone, while maximum correlation is shown in 0.5 degree radius in typhoon stage. Correlation coefficient was used to produce regressed intensities and adopted for typhoon Rusa (2002) and Maemi (2003). Multiple regression with 85GHz TB and precipitable water was found to provide an improved typhoon intensity when taking into account the storm size. The results indicate that it may be possible to use TB and precipitable water from satellite observation as a predictor to estimate the intensity of a tropical cyclone.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.846-851
• /
• 2006

본 논문은 최근 발생한 집중호우와 이상강우를 고려하여 인천지역에서 사용중인 확률강우강도식에 대한 새로운 확률강우강도식을 제안하였으며, 기상청 자료를 이용하여 지속시간 10분${\sim}$24시간까지의 임의시간 연최대강우량을 산정하였다. 강우지속기간별 확률강우량을 추정하기 위하여 11개의 확률분포형을 적용하였으며 Chi-square 검정방법, Kolmogorov -Smirnov 검정방법, Cramer Von Mises 검정방법으로 적합도 검정과 함께 최근 강우에 대한 경향을 분석하고 실제 발생한 강우 중에서 최대 발생 강우량을 고려하여 적정분포인 GEV 분포를 확률 분포형으로 선정하였다. 확률강우강도식은 최소자승법을 사용하여 Talbot형, Sherman형, Japanese형, 통합형 Ⅰ 및 Ⅱ 형태로 산정하였고, 지역내 하수도 및 하천의 지속시간을 감안하여 확률강우강도식을 결정하였다. 또한 정확성을 고려하여 통합형 Ⅰ을 선택하였고 지속시간에 따른 강우강도식의 확률강우와 관측치를 감안한 강도식을 인천지역의 강우강도식으로 제안하였다.