• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.194-203
• /
• 2016

The purpose of this study was to investigate the properties of tteok prepared from white (Samkwang) and brown rice (Heugseol, Heugjinju). The moisture and crude protein contents of rice were 14.89~17.15% and 4.79~6.81%, respectively. The crude lipid and crude ash contents of rice were 0.48~2.66% and 0.39~1.60%, respectively. The water binding capacity of Heugjinju (141.97%) was higher than those of other rice flours. As the soaking time increased, water absorption ability was in the order of Samkwang > Heugseol > Heugjinju. Using a rapid visco analyser (RVA), the initial pasting temperature of Heugseol was the highest, and the peak viscosities of Heugseol were higher than those of other rice flours. The quality characteristics of Tteokbokki tteok were assessed after its preparation by adding different amounts of Heugseol and Heugjinju (0, 5, 10, and 20%, w/w) content. The textural properties (hardness), of Heugseol and Heugseol measured using a texture analyzer, were greater than those of the control. Sensory preference tests revealed that 10% Heugseol and, 10% Heugjinju had the highest scores in appearance, color, and overall acceptability. The sensory test results revealed that Tteokbokki tteok prepared by addition of 10% added brown rice was the best.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.200-209
• /
• 2018

This study proposed a method to select existing facilities as a landmark in order to reset accumulated errors of dead reckoning in a tunnel difficult to receive GNSS signals in automated driving. First, related standards and regulations were reviewed in order to survey 'variety' on shapes and installation locations as a feature of facilities. Second, 'recognition' on facilities was examined using image and Lidar sensors. Last, 'regularity' in terms of installation locations and intervals was surveyed through related references. The results of this study selected a fire fighting box / lamp (50m), an evacuation corridor lamp (300m), a lane control system (500m), a maximum / minimum speed limit sign and a jet fan as a candidate landmark to reset positioning errors. Based on those facilities, it was determined that error correction was possible. The results of this study are expected to be used in repositioning of automated driving vehicles in a tunnel.

• Journal of fish pathology
• /
• v.14 no.2
• /
• pp.97-102
• /
• 2001

Olive flounder, Paralichthys olivaceus known as an one of the major aquacultured species in Korea were exposed to cadmium(Cd) with different protocols and analyzed the effects of exposure on the immune response. Antibody levels in sera of the group exposed to Cd(20ppb) by immersion method from 2 weeks before immuniztion with formalinised Edwardsiella tarda(E. tarda) KFE entigen to the end of experiment reached to peak level faster than that of the non-exposed group. After this peaking time the levels decreased much at a faster rate compared to the non-exposed group. This tendency was also appeared in the numbers of specific antibody secreting cells(SASC) analyzed with the enzyme-linked immunospot (ELISPOT)-assay technique in the splenocytes of the experimental groups exposed to Cd with different ways. Interestingly, the group exposed to Cd for 2 weeks before immunization also showed increased numbers of SASC unlikely the antibody production and suggested a more critical influence of cadmium exposure in early stage of immune reaction. Artificial infection with live E. tarda KFE induces 100% mortality in the flounder exposed to cadmium throughout the experimental period from two weeks before the immunization. It may imply that some other factors related to specific immunity are involving in the defence system of flounder exposed to Cd. Taked together. Cd exposure may induce temporaily stimulatory or indhibitory effects on the immune reaction, but suppress the physiological systems for the resistant against the infective agents with other toxic effects.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.349-356
• /
• 2016

This report presents the results of an investigation on the early strength development of pastes high volume slag cement (HVSC) activated with different concentration of sodium carbonate ($Na_2CO_3$). The ordinary Portland cement (OPC) was replaced by ground granulated blast furnace slag (GGBFS) from 50% to 90% by mass, the dry powders were blended before the paste mixing. The $Na_2CO_3$ was added at 0, 2, 4, 6, 8 and 10% by total binder (OPC+GGBFS) weight. A constant water-to-binder ratio (w/b)=0.45 was used for all mixtures. The research carried out the compressive strength, ultrasonic pulse velocity (UPV), water absorption and X-ray diffraction (XRD) analysis at early ages(1 and 3 days). The incase of mixtures, V5 (50% OPC + 50% GGBFS), V6 (40% OPC + 60% GGBFS) and V7 (30% OPC + 70% GGBFS) specimens with 6% $Na_2CO_3$, V8 (20% OPC + 80% GGBFS) and V9 (10% OPC + 90% GGBFS) specimens with 10% $Na_2CO_3$ showed the maximum strength development. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of specimens indicated that the hydration products formed in samples were CSH and calcite phases.

• Composites Research
• /
• v.30 no.3
• /
• pp.181-187
• /
• 2017

The effect of nanoscopic and microscopic Fe, $Fe_3O_4$, and Ni particles and their shapes and substrate materials on the heating behavior of thermoplastic polyurethane (TPU) adhesive films was investigated via induction heating. The heat generation tendency of $Fe_3O_4$ particles was higher than that shown by Fe and Ni particles in the TPU adhesive films. When the Fe and Ni particle size was larger than the penetration skin depth, the initial heating rate and maximum temperature increased with an increase in the particle size. This is attributed to the eddy current heat loss. The heating behavior of the TPU films with Ni particles of different shapes was examined, and different hysteresis heat losses were observed depending on the particle shape. Consequently, the flake-shaped Ni particles showed the most favorable heat generation because of the largest hysteresis loss. The substrate materials also affected the heating behavior of the TPU adhesive films in an induction heating system, and the thermal conductivity of the substrate materials was determined to be the main factor affecting the heating behavior.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.91-97
• /
• 2014

With Pb-free solder joints containing Sn-Ag-Cu-based ternary alloys (Sn-1.0 wt.%Ag-0.5Cu and Sn-4.0Ag-0.5Cu) and Sn-Ag-Cu-In-based quaternary alloys (Sn-1.0Ag-0.5Cu-1.0In, Sn-1.2Ag-0.5Cu-0.4In, Sn-1.2Ag-0.5Cu-0.6In, and Sn-1.2Ag-0.7Cu-0.4In), fracture-mode change, shear strengths, and fracture energies were observed and measured under a high-speed shear test of 500 mm/s. The samples in each composition were prepared with as-reflowed ones or solid-aged ones at $125^{\circ}C$ to 500 h. As a result, it was observed that ductile or quasi-ductile fracture modes occurs in the most of Sn-Ag-Cu-In samples. The happening frequency of a quasi-ductile fracture mode showed that the Sn-Ag-Cu-In joints possessed ductile fracture properties more than that of Sn-3.0Ag-0.5Cu in the high-speed shear condition. Moreover, the Sn-Ag-Cu-In joints presented averagely fracture energies similar to those of Sn-Ag-Cu joints. While maximum values in the fracture energies were measured after the solid aging for 100 h, clear decreases in the fracture energies were observed after the solid aging for 500 h. This result indicated that reliability degradation of the Sn-Ag-Cu-In solder joints might accelerate from about that time.

• The Journal of the Petrological Society of Korea
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1993

We report on kyanite newly found in the Yongduri gneiss complex of the Chuncheon-Hongcheon area, central Gyeonggi massif. Major mineral assemblage of quartzofeldspathic gneisses in the study area consists of biotite+ garnet+ sillimanite + plagioclase+ quartz${\pm}$kyanite${\pm}$K-feldspar${\pm}$muscovite. Kyanite occurs in four samples, and coexists with sillimanite in three of these samples. In most cases, kyanite is anhedral to subhedral, ranges up to Imm in the maximum dimension, and occurs as metastable relict grains. These observations indicate that the Yongduri gneiss complex has experienced a medium-pressure type metamorphism, followed by low-pressure type one belonging to the sillimanite+K-feldspar zone. Average temperature and pressure of the peak metamorphism are $683{\pm}62^{\circ}C$ and 4.9-5.5 kbar, respectively, when the existing chemical data are re-interpreted. In conjunction with the finding of kyanite in the Cheongpyeong-Gapyeong area (Lee and Cho, 19921, this study demonstrates that kyanite may occur regionally in central Gyeonggi gneiss complex. Moreover, the persistence of kyanite even after the high-T metamorphism of the sillimanitetK-feldspar zone suggests that the central Gyeonggi massif has experienced a tectonometamorphic evolution characterized by a rapid uplift.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.97-103
• /
• 1986

In order to investigate the important morphological traits, and grain yield and its components on basis of regional variation of barley plant, Olbori was tested at 3 locations Suwon, Daejeon and Jinju for 3 years. It needed seven days around 15$^{\circ}C$ of daily average temperature for seed emergence. 104 to 144 days for Daejeon and 135 to 142 for Jinju after sowing are needed for productive tillers according to the different sowing dates, and % of productive tillers were ranged on 37-77%, showing higher value at the southern region. Young spike elongated slowly at early stage, and after floret differentiation it appeared rapid development with 1.05-1.95 mm elongating per day. Analysis of variance indicated that only number of kernels/spike showed significant differences among locations, but every traits related to grain yields revealed the significant differences among different sowing dates. Little differences between locations existed on grain yield but its large variation appeared between sowing dates, especially indicating more variation at northern regions.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.271-280
• /
• 2009

The best way to treat livestock manure is to recycle as much as possible. The composting of livestock manure is a safe and economical treatment process. This study was carried out to investigate decomposition effect of pig manure by adding fermented compost. The fermented compost was added in pig manure mixed with sawdust as an inoculator, and the mixture was fed to composting reactor. Supplemental levels of fermented compost on the pig manure mixed with sawdust were regulated at 5, 10, 15 and 20% (V/V) respectively. The results were as follows ; 1. In all cases, PH range was between 7.6~9.05 during composting period. 2. The highest temperature and the long duration of thermophilic stage were observed in control treatment. 3. The number of microorganism reached at maximum on day 4, which recorded the highest temperature 4. Compost pile mixed with 10% of inoculator (fermented compost) showed the highest C/N ratio reduction.

• Korean Journal of Poultry Science
• /
• v.19 no.4
• /
• pp.197-204
• /
• 1992

This study was divided into experiment 1(191 g egg-albumen plus 150g sucrose) and experiment 2(222g egg-albumen plus 150g sucrose)which were subdivided into groups treated with 0, 8.71, 17.43 and 26.149 egg yolk. These experiments were incubated in a shaking water bath($50^{\circ}C$ ) with a speed of 92(turnaround) per minute (or a period of times. The pH and specific gravity were measured after 2, 4, 6, 8, 10 and 12 hours incubation. The results obtained were as follows ： 1. The pH and specific gravity were steadily increased by shaking time, but decreased by the amount of egg yolk. 2. In the groups treated with egg-albumen, egg yolk, and sucrose of experiments 1 and 2, PH was increased by shaking time and reached highest value at 10 hours shaking time. However, after 12 hours shaking time pH slightly decreased though not significantly. 3. In the experiment 1 and 2, specific gravity had a higher correlation with pH and the regression equation between specific gravity and pH (X) were Y＝0.1081x+0.272(r＝0.899n) and Y＝0.083X＋0.476(r＝0.825$^{* *}$), respectively.y.