• Journal of the Korean Society of Radiology
• /
• v.9 no.2
• /
• pp.109-115
• /
• 2015

In case of a CT examinations, there is a difference in the distribution of radiation dose from that of general X-ray equipments, and it has been known to cause a great radiation exposure during the examinations. However, owing to its high reliability on the accuracy of a examinations result, its use has increased continuously. In consideration of such a circumstance, the CT equipment, radiation dose during CT examinations, diagnostic reference level, and solutions to reduce radiation dose were mentioned on the basis of previously reported data.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.407-408
• /
• 2011

본 논문에서는 현재 생산하고 있는 흉부 촬영 장치의 위치제어 기능을 개선하는 제어모듈의 개발에 대해 논하였다. 현재 생산되고 있는 흉부 촬영 장치는 스위치를 수동으로 조작하여 촬영에 적당한 위치에 도달하였을 때 멈춘 후 촬영을 하고 있다. 그러나 이 방식은 원하는 위치에 정확히 위치시키기 위해서는 원하는 위치가 될 때까지 스위치 조작을 반복하여야 한다. 따라서 단 한 번의 스위치 버튼을 누르기만 하면 정확한 위치에 도달하도록 스위치 모듈과 제어장치 모듈의 기능을 개선시켜 위치 설정을 위한 조작 시간을 줄이고 사용의 편의성을 향상시켜 업무의 효율성을 기할 수 있도록 하였다.

• Journal of Korean Electronics
• /
• v.11 no.2
• /
• pp.92-96
• /
• 1991

• Journal of Welding and Joining
• /
• v.16 no.2
• /
• pp.1-6
• /
• 1998

• Journal of The Korean Radiological Technologist Association
• /
• v.24 no.2
• /
• pp.91-94
• /
• 1998

• ICROS
• /
• v.12 no.2
• /
• pp.22-28
• /
• 2006

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.153-159
• /
• 2024

In X-ray projection, Unskilled radiologists become skilled through fail exam. This causes the patient to be exposed to unnecessary radiation. In this study, pre-position unskilled radiologic technologist presented ways to improve clinical proficiency. presented a skull lateral x-ray projection practice method using visual, spatial, and assistive devices. In addition, the accuracy and usefulness of the use of assistive devices were evaluated. When X-ray images were taken based on learning, the rotational spacing, which indicates image distortion, was 7.85 ± 1.45 mm and the tiliting spacing was 4.84 ± 0.5 mm. When practicing using visual aids, the rotational spacing is 4.4 ± 0.76 mm and the inclination spacing is 3.01 ± 0.87 mm. using a spatial compensation device, the rotational spacing is 5.2 ± 0.69 mm and the tiliting spacing is 3.33 ± 0.61 mm. Skull lateral X-ray Image distortion caused by empirical photography practice decreased by 5.4%, but image distortion caused by tilting increased by 1.2%. When practicing using a visual assistive devices, the degree of rotational spacing by 40.1% and the tiliting spacing decreased by 30.7% compared to the empirical x-ray exposure practice. When using spatial assistive devices, the rotation interval was reduced by 41.7% and the tilting interval by 23.7% compared to conventional empirical x-ray exposure practice. Therefore, if an unskilled radiologist practices using visual and spatial aids,the accuracy will be improved in skull lateral x-ray projection.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.61-65
• /
• 2015

Mammography equipment is an essential detector for making an early diagnosis of female's breast lesion. Recently, in most hospitals, a digital mammography detector is used due to the wide and consistent supply of digital mammography equipment. However, the average effective radiation is increasing due to the indiscreet use of CR or DR mammography. The purpose of this study is to recognize the possible indirect radiation damage, which can be occurred due to an excessive effective exposure of radiation, by evaluating spacial radiation rate of the digital mammography detector used for female patient. Consequently, the high mount of spacial radiation showed digital mammography equipment on the horizontal direction. Considering the result, digital mammography equipment should be installed by avoiding along the horizontal direction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.645-653
• /
• 2020

Recently studies on how to use the UAV (Unmanned Aerial Vehicle) are actively being conducted, and the National Geographic Information Institute published the 『Work Guidelines for Public Surveying of Unmanned Aerial Vehicles』. However, the guidelines do not provide the optimum shooting conditions required for each application. In this study, we tried to find the suitable shooting conditions for the production of 3D (Three-dimensional) spatial information and orthophoto. To this end, 45 experiments were conducted by various altitudes, overlaps, and camera angles within an above ground level of 150m. For evaluating the 3D modeling by shooting conditions, point densities of 9 verification areas were analyzed, and to evaluate the orthophotos, 1/1,000 digital maps were compared. Considering the quality of the output and the processing time for precise 3D construction, an altitude of 50m, an overlap of 70~80%, and a camera angle of 80~90° are suitable as shooting conditions, and an altitude of 100m and camera angle of 80~90° are suitable for orthophoto generation.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2041-2042
• /
• 2011

본 논문에서는 회전 스캔 방식을 이용한 테라헤르츠 단층촬영 방법을 제안하였고, 이차원 스캔 방식과 비교하여 회전스캔 단층촬영의 효율성을 연구하였다.