• Journal of Energy Engineering
• /
• v.9 no.4
• /
• pp.319-327
• /
• 2000

산업분야의 여러공정에서 배출되는 휘발성 유기화합물은 1차적인 작업자에 대한 유해성뿐만이 아니라 대기중에 배출시의 제 2차 오염물질의 생성 때문에 최근 들어 이러한 물질의 처리에 큰 관심이 집중되고 있다. 본 연구에서는 휘발성 유기화합물로서 프로판을 사용하여 이러한 초 희박 혼합기의 제거를 위해 재생열산화법이 제안되었다. 실험장치에는 중앙에 연소실과 전기적 열량공급장치를 장착하였다. 초 희박 혼합기의 연소실에서의 산화과정과 열사화 장치의 폐열회수 특성을 연구하기 위하여 혼합기의 농도, 유속 및 연소실 최대온도와 같은 다양한 작동조건을 고려하였다. 그 결과. 재생열산화장치가 초 희박 혼합기의 산화에 적절하게 사용될 수 있음을 알았으며 최대 96%의 제거효율 얻을 수 있었다. 산화과정중에 발생하여 배출되는 CO는 운전조건을 변화시킴으로써 그 농도를 낮출 수 있었으며 열적 NOx는 배출되지 않았다. 페열회수효율은 전 운전영역에서 높게 나타났으며 그 값이 최대 98%에 이르렀다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1113-1120
• /
• 1988

This paper presents the results of an experimental investigation on one dimensional excess enthalpy flame formed in a porous block. The investigation is undertaken in order to further the physical understanding of internal heat recirculation from reaction zone to unburned mixture. Two porous blocks are placed at both sides of combustion block to control the temperature distribution in the combustion block by means of radiation heat transfer. Mean temperature measurement reveals the general nature of the reaction zone in the porous material. It is conformed that the temperature of reaction zone exceeds the adiabatic flame temperature and the flame is stabilized at the out range of flammibility limit derived by conventional burner.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.137-143
• /
• 2012

Currently, in order to meet the reinforced emissions regulations for harmful exhaust gas including carbon dioxide ($CO_2$) as a greenhouse gas, technologies for reducing $CO_2$ emission and fuel consumption are being developed. Gasoline direct injection (GDI) systems have the advantage of improved fuel economy and higher power output than port fuel injection gasoline engine systems. The aim of this study is to examine the performance and emission characteristics of a lean burn GDI engine equipped with spray-guided-type combustion system. Stable lean combustion was achieved with a late fuel injection strategy under a constant operating condition. Further improvement in specific fuel consumption is possible with the introduction of multiple fuel injection strategies, which also increases hydrocarbon (HC) and nitrogen oxide ($NO_x$) emissions and decreases carbon monoxide (CO) emission.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.22-28
• /
• 2015

In order to keep the competitiveness of LPG fuel for transportation fuel, the difference in fuel consumption with gasoline and cost for an aftertreatment system should be reduced with continuous development of technology for LPG engine. In the present study, spray-guided type direct injection combustion system, whose configuration is composed of direct injector in the vicinity of spark plug, was employed to realize stable lean combustion. A certain level of nitrogen oxides($NO_x$) emits due to a locally rich mixture regions in the stratified mixture. With the application of EGR system for the reduction of $NO_x$, 15% of $NO_x$ reduction was achieved whereas fuel consumption and hydrocarbon emission increased. By the application of EGR, the combustion speed reduced especially appeared at initial flame development period and peak heat release rates and increasing rates for heat release rate decreased as EGR rate increased due to the dilution effect of intake air.