• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.758-762
• /
• 1997

52mol% Fe$_{2}$O$_{3}$, 26mol% MnO의 조성에서 calcium과 vanadium의 동시첨가에 의한 투자율의 변화원인을 살펴보았다. 초투자율은 첨가물의 농도가 커짐에 따라 감사하였으나 소결체의 밀도나 입자크기는 증가하였으므로 초투자율의 변화는 미세구조의 변화로는 설명되지 않았다. 전기비저항은 첨가물의 농도가 증가함에 따라 증가하였으며 이는 입계의 고저항층의 생성과 vanadium ion에 의한 Fe$^{2+}$이온의 산화로 설명되었다. 첨가물의 농도가 증가함에 따라, 초투자율의 제 2차 최대치가 나타나지 않는 것과 초투자율이 감소하는 것으로부터, 결정자기이방성 상수의 값은 음으로 커짐을 알 수 있었다. 투자육의 온도의존성과 비저항의 변화로부터, 첨가물의 농도에 따른 상온 초투자율의 감소는 Fe$^{2+}$ 이온 농도의 감소에 따른 결정자기이방성 상수의 증가에 의한 효과와 입계에 유리질이 생겨 자벽이 쉽게 이동하지 못하는 효과 때문인 것으로 판단되었다.

• Journal of the Korean Ceramic Society
• /
• v.36 no.3
• /
• pp.255-259
• /
• 1999

높은 투자율과 낮은 손실특성을 지닌(Mn, Zn)ferrite의 전자기적 특성은 소결공정과 소결분위기에 따라 상당히 다양하게 나타난다. 본 연구에서는(Mn, Zn)ferrite를 소결시킬 때의 승온속도와 냉각속도에 따른 초투자율 특성과 미세구조의 관계에 관하여 고찰하였다. 승온속도의 영향을 고찰하기 위하여 spinel ferrites 생성 및 결정입 성장 거동에 가장 중요한 온도인 800~120$0^{\circ}C$의 범위에서 속도를 변화시켰고, 냉각속도 영향을 살펴보기 위하여 1100~80$0^{\circ}C$ 온도범위를 택하였다. 열처리 온도범위 800~120$0^{\circ}C$에서 승온속도가 증가함에따라 초투자율이 7$^{\circ}C$/min까지는 증가했으나 그 이상의 승온속도에서는 오히려 초투자율이 감소하였다. 또한 1100~80$0^{\circ}C$ 온도범위에선 냉각속도가 증가될수록 초투자율이 감소하는 경향을 나타내었다. 치밀화 및 투자율을 높이기 위하여 첨가된 CaO, SiO2, V2O5의 분포상태를 분석한 결과, 이들 첨가물들은 입자와 입계를 따라 균일하게 분포하는 것으로 나타났다.

• Resources Recycling
• /
• v.7 no.4
• /
• pp.50-54
• /
• 1998

In order to obtain desired electromagnetic propertieι high initial permeability and good frequency dependance of initial p permeability, the adding effects of sevral seeds were experimented in Mn-Zn ferrite system. As adding seed grams, calcined at sintering temperature, abnormal grains were disappeared clearly but the density and the initial permcability of sintered Mn-Zn ferrite body were decreased. On the contrary, in case of adding seed rains which were calcined below the calcination temperatnre of matrix particle, abnormal grains remained but the initial permeability was increas$\xi$d with proper s$\xi$ed content. W With proper seed content, the initial permeability was increased by 10-20% but tbe $\alpha$ltoff frequency was not changed.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.43-47
• /
• 2008

[ $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ ] nano-glass has been prepared by sol-gel method. The mean particle size was 60.3 nm with narrow size distribution. The nano-galss has been used as a sintering aid for the densification of the NiZnCu ferrites. The ferrite was sintered with nano-glass sintering aids at $840{\sim}900^{\circ}C$, 2 h and the initial permeability, quality factor, density, and saturation magnetization were also measured. The initial permeability of 0.5 wt% nano-glass added toroidal sample for NiZnCu ferrites sintered at $900^{\circ}C$ was 193.3 at 1 MHz. The initial permeability and saturation magnetization were increased with increasing annealing temperature. As a result, $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ nano-glass systems were found to be useful as sintering aids for multilayer chip inductors.

• Electrical & Electronic Materials
• /
• v.3 no.3
• /
• pp.205-214
• /
• 1990

본 논문은 저손실 Mn-Zn-Fe 페라이트 제조에 관하여 연구한 것이다. Mn-Zn-Fe 페라이트는 16mol% Xno, 31mol% MnO 및 53mol% Fe$_{2}$O$_{3}$로 조성하였으며 0.1wt% $Na_{2}$SiO$_{3}$ 0.05wt% $Na_{2}$SiO$_{3}$ 0.1%wt% CaO 0.05% SiO$_{2}$ 및 0.05wt% SiO$_{2}$ 및 0.05wt% $Na_{2}$SiO$_{3}$ 0.1% CaO 0.05wt% $Al_{2}$O$_{3}$를 미량 첨가하였다. 그리고 하소와 분쇄과정을 거친 분말은 충진성을 높이기 위하여 과립화하였다. 소결 1250, 1300 및 1350.deg.C에서 이루어졌고, 평형 산소분압은 소오킹 시 PO$_{2}$는 6%부터 시작하여 점차 감소시켰으며 900.deg.C에서 순수한 질소 분위기로 냉각시켰다. 초투자율, 손실계수 및 고유저항 등의 자기적인 특성은 1300.deg.C에서 소결했을 경우의 것이 가장 우수하였다. 즉, 초투자율은 2*$10^{3}$~$10^{3}$의 높은 값을 얻을 수 있었으며 tan.delta./.mu.i값은 100KHz~ 400KHz의 고파수대에서 9*10$_{-6}$~21*10$_{-6}$이었으며 고유저항 값은 485~680 .OMEGA.-cm의 높은 값을 나타내어 중간주파수대의 자심재료에 적합한 페라이트임을 확인하였다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.6
• /
• pp.232-237
• /
• 2007

We have synthesized the low temperature sintered of Ni-Zn-Cu ferrite with nonstoichiometric composition a little deficient in $Fe_2O_3$ from $(Ni_{0.2}Cu_{0.2}Zn_{0.6})_{1+x}(Fe_2O_3)_{1-x}$. For low loss and acceleration of grain growth $TiO_2$ and $Li_2CO_3$ was added from 0.25 mol% to 1.0 mol%. The mixture of the law materials was calcinated and milled. The compacts of toroidal type were sintered at different temperature $(875^{\circ}C,\;900^{\circ}C,\;925^{\circ}C\;950^{\circ}C)$ for 2 hours in air followed by an air cooling. Then, effects of composition and sintering temperatures on the physical properties such as density, resistivity, magnetic induction, coercive force, initial permeability, and quality factor of the Ni-Zn-Cu ferrite were investigated. The density of the Ni-Zn-Cu ferrite was $4.85\sim5.32g/cm^3$, resistivity revealed $10^8\sim10^{12}\Omega-cm$. The magnetic properties obtained from the aforementioned Ni-Zn-Cu ferrite specimens were 1,300 gauss for the maximum induction, 4.5 oersted for the coercive force, 275 for the initial permeability, and 83 for the quality factor. The physical properties indicated that the specimens could be utilized as the core of high frequency range (involved microwave range) communication and deflection yoke of T.V.

• Journal of the Korean Magnetics Society
• /
• v.20 no.5
• /
• pp.182-186
• /
• 2010

Effect of cobalt substitution on the sintering behavior and magnetic properties of a NiZnCu ferrite was studied. $Ni_{0.36-x}Co_xZn_{0.44}Cu_{0.22}Fe_{1.98}O_4(0{\leq}x{\leq}0.04)$ ferrite was fabricated by a solid stat reaction method. It was proposed and experimentally verified that $Co^{2+}$ substituted NiZnCu ferrite was effective on improving the quality factor and magnetic properties of NiZnCu ferrites for multilayer chip inductors. The ferrite was sintered without sintering aids, at $880{\sim}920^{\circ}C$, for 2 h and the initial permeability, quality factor, density, shrinkage, saturation magnetization, and coercivity were also measured. The quality factor (Q) was increased linearly up to x = 0.01 and decreased rapidly over x = 0.01. As the cobalt content increased, the initial permeability and density of the ferrites decreases. The initial permeability of toroidal sample for $Ni_{0.35}Co_{0.01}Zn_{0.44}Cu_{0.22}Fe_{1.98}O_4$ ferrites sintered at $900^{\circ}C$ was 130 at 1 MHz and quality factor was 230.

• Korean Journal of Materials Research
• /
• v.3 no.5
• /
• pp.497-504
• /
• 1993

Effects of $Ta_2O_5,ZrO_2$ and $SiO_2$ addition on magnetic properties of 0.02wt%$Bi_2O_3$ and 0 . 0 5 wt%$CaCO_3$ doped Mn-Zn ferrites(58.5mol% $Fe_2O_3$, 25.5 mol% ZnO) were investigated. E:lectrlcal resistivity and magnetic properties such as the initial permeability($\mu_i$), loss factor(tan$\delta$), coercive force Hc(m0c) were measured. With lncreasing $Ta_2O_5$ and $ZrO_2$ addition, the following effects were observed: I ) Decreasing of the average grain size; 2) lncreasing of the electrical resistivity and initial permeability; 3) Ilecreasmg of loss factor values. (very low loss esprcially at high frequency region) ; 4 ) Fine and uniform microsrructures were obtamed at O.lwt% nddecl samples. In case of $SiO_2$ addition, anomalous grain growth and degradation of magnetic properties were observed. The obtained maximum initial permeability value was 6260 at IOkHz. $25^{\circ}C$ from 0.02wt%$Bi_2O_3$. 0.05wt%$CaCO_3$, 0.lwt%$Ta_2O_5$ added sample, the corresponded relative loss factor (tan$\delta /\mu_i$)for the sample was $4.2 \times 10^{-6}$.

• Electrical & Electronic Materials
• /
• v.4 no.3
• /
• pp.211-219
• /
• 1991

본 논문은 고주파에서의 Ni-Zn페라이트의 첨가물에 따른 소결특성에 관하여 연구한 것이다. 연구에서 사용한 시편은 20mol% NiO, 30mol% ZnO 및 50mol% Fe$_{2}$ $O_{3}$이 조성으로된 페라이트를 모재로 하고 첨가물로서 각각 0.0025mol%, 0.005mol% 및 0.001mol%의 비율로 Nb$_{2}$ $O_{5}$, Bi$_{2}$ $O_{3}$ 및 V$_{2}$ $O_{5}$를 첨가하였다. 그리고 소결을 1100.deg.C에서 이루어졌다. 초투자율은 V$_{2}$ $O_{2}$가 첨가된 시편의 100KHz-1000KHz주파수대에서 4*$10^{2}$~8*$10^{2}$의 높은 값을 얻었다. 손실계수는 100KHz~500KHz주파수대에서 1*10~3*$10^{-2}$이었다. 1/(.mu.*Q)값은 0.005mo;% Bi$_{2}$ $O_{3}$가 첨가된 시편에서 가장 높은 값을 나타내었다. 자기저항은 초유자율과 반비례의 관계를 나타내었다. 실험의 결과 첨가물에 의한 소결특성은 액상형성에 의하여 고른 입자성장을 확인할 수 있었다. 따라서 0.01mol% V$_{2}$ $O_{5}$를 첨가한 시편이 가장 우수한 자기특성을 나타내고 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.6
• /
• pp.848-853
• /
• 1993

The properties of ferrite bead, a low-pass filter, are determined by the frequency dispersion of the complex permeability. In this study, frequency dispersion of complex permeability of the Ni-Zn ferrites with different Ni/Zn ratio were investigated. Relationship between the behavior of filter and dispersion of complex permeability of a ferrite was studied. As a result, it was concluded that the compositions for Ni/Zn ratio of $0.41{\sim}0.47$, having high initial permeability and good sensitivity, were favorable as a ferrite bead filter.