• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1008-1013
• /
• 2003

This paper concerns the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system consisted of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.896-903
• /
• 2004

This paper proposes the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high-precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system composed of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.

• 한국정밀공학회지
• /
• 제33권11호
• /
• pp.893-898
• /
• 2016

Plastic array lens are cheap to manufacture; however, plastic is not resistant to high temperatures and moisture. Optical glass represents a better solution but is a more-expensive alternative. Glass array lens can be produced using lithography or precision-molding techniques. The lithography process is commonly used, for instance, in the semiconductor industry; however, the manufacturing costs are high, the processing time is quite long, and spherical aberration is a problem. To obtain high-order aspherical shapes, mold-core manufacturing is conducted through ultra-precision grinding machining. In this paper, a $4{\times}1$ mold core was manufactured using an ultra-precision machine with a jig for the injection molding of an aspherical array lens. The machined mold core was measured using the Form TalySurf PGI 2+ contact-stylus profilometer. The measurement data of the mold core are suitable for the design criterion of below 0.5 um.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.58-63
• /
• 2009

Silicon carbide (SiC) has been used for many engineering applications because of their high strength at high temperatures and high resistances to chemical degradation. SiC is very useful especially for a glass lens mold whose components demanded to the machining with good surface finish and low surface damage. The performance and reliability of optical components are strongly influenced by the surface damage of SiC during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified SiC glass lens mold. Usually the major form of damage in grinding of SiC is a crack occurs at surface and subsurface. The energy introduced in the layers close to the surface leads to the formation of these cracks. The experimental studies have been carried out to get optimum conditions for grinding of silicon carbide. To get the required qualified surface finish in grinding of SiC, the selection of type of the wheel is also important. Grinding processes of sintered SiC work-pieces is carried out with varying wheel type, depth of cut and feed using diamond wheel. The machining result of the surface roughness and the number of flaws, have been analyzed by use of surface profilers and SEM.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1486-1496
• /
• 1993

본 연구에서는 새로운 연속 전해드레싱 시스템을 구축하고 현재 전자재료로 널리 사용되고 있는 훼라이트에 대하여, 경면연삭을 실현하기 위한 제반 연삭조건 즉, 전해액의 영향, 파크전류와 펄스폭의 영향, 전해드레싱과 취성파괴와의 관계 등을 규명하였다.

• 한국공작기계학회논문집
• /
• 제12권2호
• /
• pp.31-36
• /
• 2003

Electronic or measuring instruments equipped with aspherical lens have recently been used since aspherical lens is more effective than spherical one. for the mass production of aspherical lenses, specific molds with precisely machined cores should be prepared. Some researches on the aspherical lens machining have been carried out to date. However, ultra-precise finding of aspherical or mold core has not been fully studied. In this study, the ultra-precise grinding and evaluating system were established to investigate the finding characteristics of aspherical lenses. Unlike conventional grinding process, since a highly-precise lathe were operated in a clean room without vibration the experimental results can be very useful for further studies on ultra-precise grinding process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 춘계학술대회 논문집
• /
• pp.103-110
• /
• 1991

본 연구에서는 최근들어 첨단 가공기술로서 중요시되고있는 초정밀 경면가공기술의 기본원리를 이해하고 관련지식을 습득하여 향후 보다 나은 상태의 경면가공을 위한 기초를 확립하는데에그 목적을 두었다. 실험을 위한 공작기계는 초정밀 만능 연삭반( high precision universal grinder)에 플라이컷(fly-cut)방식에 의한 절삭가공이 가능 하도록 여러가지장치들을 부착하였으며, 절삭공구는 천연 다이아몬드를 사용하고, 피삭재는 A1-Cu-Ni-Mg 합금을 사용하였다. 본 실험에서는 주어진 조건내에서 어느정도의 표면 조도를 달성할수 있는지를 알아보고 그 과정을 통하여 공작기계, 공구, 피삭재등의 영향과 절삭력, 칩, 표면상태등을 고찰하여 여러가지 현상을 규명하여 향후의 발전을 위한 대책에 활용하고자 한다.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.76-82
• /
• 2009

To obtain the surface roughness with nano order, we need a ultra-precision machine, cutting condition, and materials. In this paper, the cutting condition for getting nano order smooth surface of core have been examined experimentally by the ultra-precision machine and diamond wheels. The effects of the cutting velocity, the feed rate and depth of cut on the surface roughness were studied. And also, the surface roughness was measured by the Form Talysurf series PGI 840. The champion data of developed core was surface roughness Rmax 24.6nm, figure accuracy Rmax 68.9nm.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.6-9
• /
• 2005

In this study, the ultra precision centerless grinder for ferrule grinding was designed. As the good-qualified ferrule is required a precise and fine grinding, grinding machine for ferrule must have a high accuracy and a sufficient stiffness. The centerless grinder is composed of the high damping concrete bed, grinding wheel spindle unit, regulating wheel spindle unit, feeding table and dressing unit. For a newly developed centerless grinder, hydrostatic system with high precision feeding and high stiffness was proposed. The grinding and regulating wheel spindle units were composed of hydrostatic spindle and feeding table was hydrostatic table. The prototype of hydrostatic table was manufactured and tested.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.13-19
• /
• 2003

산업의 발달과 더불어 초소형, 고정밀 제품에 대한 수요가 증가함에 따라 이를 가공할 수 있는 마이크로 가공기술 및 초정밀 공작기계를 구현할 수 있는 설계기술이 국가 경쟁력을 결정하는 핵심 기술로 인식되기에 이르렀다. 공작기계의 성능은 주축계 설계 및 제작기술, 이송계 설계 및 제작기술, 오차 보상기술, 베드 구조물 설계 및 방진기술, 시스템 종합기술 등에 의해 결정되며, 이중에서도 주축계의 설계 및 제작 기술은 가공정밀도 및 생산기술을 주도하는 핵심기술이라 할 수 있다.(중략)