• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.490-490
• /
• 2023

위상배열초음파검사(PAUT)는 기존 초음파검사에서 획득할 수 있었던 A-scan의 결과와 달리, 관로 내부로 진입하지 않고도 부식에 의한 강관 손상 정도를 정량적인 시각적 데이터로 파악할 수 있는 검사 기술이다. 관내부 직접조사가 가능한 상수도 강관을 대상으로 직접조사와 PAUT를 비교한 결과, PAUT는 높은 정확도와 신뢰성을 보여주었다. 또한, 강관 내부의 부식검사에서는 PAUT를 적용함으로써 관체의 부식 면적, 부식 최대 깊이, 부식 위치를 넓은 범위에서 신뢰성 높은 검사 및 결과 도출이 가능하였다. 이러한 결과는 PAUT 기술이 강재 구조물의 다양한 부식 문제를 신속하게 파악하고 해결하는 데 기여할 수 있음을 의미한다. 따라서, 본 검사 기법은 상수도 관로의 강재 진단 및 점검에 있어 높은 신뢰성 및 효율성을 보여 주는 진단기법으로써 다양한 강재 시설물의 평가에 활용성이 클 것으로 판단된다. 이에 따라 PAUT는 상수도 시설물뿐만 아니라 다양한 시설물에서도 높은 활용 가능성을 가질 것으로 예상된다.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.576-584
• /
• 2020

In order to obtain basic information for using polyvinyl alcohol (PVA) gel as a tissue mimicking phantom for temperature visualization, the temperature change characteristics due to the focused ultrasound were examined for different concentration of PVA. To obtain the basic acoustic characteristics, the speed of sound, the attenuation coefficient, and the density depending on the PVA concentration were measured, and the thermodynamic characteristics, such as thermal conductivity and heat capacity, were measured. The range of temperature rising in the vicinity of the focal point due to the focused ultrasound was observed using a thermochromic film that changes color at 30 degree or more, and the discolored area was obtained by image processing of the recorded image. As the concentration of PVA increases in the given range of 2 wt% ~ 16 wt%, the area that rises above 30 degree inside the gel increases linearly. It is confirmed that the discolored area increases as the power applied to the focused ultrasonic transducer increases. These results showed good agreement with the simulation results using the finite element method.

• Journal of the Korean Society of Radiology
• /
• v.7 no.3
• /
• pp.191-198
• /
• 2013

We verified reason of pain by rotator cuff disease using shoulder sonography and found a correlation between shoulder pain and stress. To find out the accuracy of sonographic prediction of rotator cuff disease among the patients with shoulder pain we surveyed 184 patients in S hospital in Seoul Korea between January to October 2012. These patients were previously diagnosed with the torn rotator cuff, adhesive capsulitis and impingement syndrom with shoulder pain. In most times, the rotator cuff disease was diagnosed among the physical workers who use shoulder excessively and also in the women in their 50~60 years of age(144 patients, 78.3%). There were significant correlation between rotator cuff disease and the stress of pain, between sonographic prediction and pain(p<.05). There were significance between shoulder pain and stress in daily life according to result for survey of BEPSI-K(p<.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.906-913
• /
• 2015

The red mud generated from the Bayer alumina production process seriously threatens the environment and human safety. Therefore, the reduction and recycling of red mud is an urgent topic in the aluminum industry. In this study, the effects of four parameters, ultrasound power, reaction temperature, time, and acid concentration, on the leaching of Fe, Al from red mud was investigated. The major parameters influencing the metal recovery efficiency from red mud were ultrasound power and reaction temperature. The use of ultrasonic irradiation resulted in 1.72 and 1.28 times higher recovery efficiency for Fe and Al, respectively. The proper conditions for the recovery of the metal components present in the red mud is the ultrasound intensity (150 W), sulfuric acid concentration (4-6N), reaction temperature ($70^{\circ}C$), and reaction time (2 hours), etc.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.90-95
• /
• 2008

Purpose: We wanted to assess the accuracy of ultrasound for detecting abnormality of the long head of the biceps tendon in patients with rotator cuff disorders. Materials and Methods: Between January 2006 and March 2007, we reviewed the arthroscopic findings of biceps tendons in 67 patients with rotator cuff disorder and who underwent ultrasonography pre-operatively. The patients' average age was 58 years and there were 41 males and 26 females. The statuses of the biceps tendons were described as 'normal', 'dislocation', 'subluxation', 'partial or complete tears', and 'tendinopathy'. We investigated the correspondence between the arthroscopic and ultrasonographic findings. Results: On ultrasonography, the biceps tendons were 'normal' in 37 patients and 'abnormal' in 30 patients. On arthroscopy, 5 biceps tendons turned out to have partial tears, which were 'normal' on ultrasonography. On the other hand, 8 biceps tendons were 'normal' which were 'abnormal' on ultrasonography. Three dislocations and 4 complete tears of biceps tendons were identified on arthroscopy, and all of them were detected by ultrasonography. Of the 20 cases of 'tendinopathy' seen on ultrasonography, 15 patients had partial tears and the remaining 5 patients were normal on arthroscopy. Conclusion: Ultrasonography is accurate for detecting some biceps pathologies, such as dislocation or complete tear, but it is not accurate for the detection of partial tear.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.322-328
• /
• 2009

Emulsion polymerization of octamethylcyclotetrasiloxane (OMCTS) was conducted under ultrasonic irradiation. Two sources of ultrasound with different intensities and frequencies of 20 KHz and 40 KHz were used for horn and bath type reactor, respectively. A combined process of horn and bath was also investigated. The effectiveness of the reaction systems was investigated by measuring conversion as well as intrinsic viscosity of the products. The influence of reaction temperature and sonication time on the progress of sonochemical polymerization was examined. It was found that conversion of greater than 80% and high viscosity were achieved within a few minutes of sonication in a horn type reactor, however, conversion and viscosity showed maximum values depending upon the sonication time. In a bath type reactor where a relatively weak intensity was maintained, longer duration time of more than one hour of sonication was required to reach a high level of conversion and viscosity. Compared with the horn type system, the conversion and viscosity in the bath type reactor were increased along with the sonication time. When the polymerization was carried out in a combined system of horn and bath, the evolution of conversion and molecular weight was quite different from the other cases. For the given geometry of reaction system, acoustic analysis using a commercial software was carried out and the results were correlated with experimental observation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.652-658
• /
• 2016

In this paper, the theoretical research and simulation using the Finite Element Method (FEM) to design and form a micro-pattern for an ultrasonic horn is described. The present method is based on an initial design estimate obtained by FEM analysis. The natural and resonant frequencies required for the ultrasonic tool horn used for forming the fine pattern were predicted by finite element analysis. FEM analysis using ANSYS S/W was used to predict the resonant frequency for the optimum technical design of the ultrasonic horn vibration mode shape. When electrical power is supplied to the ultrasonic transducer, it is converted into mechanical movement energy, leading to vibration. The RFID TAG becomes the pattern formed on the insulating sheet by using the longitudinal vibration energy of the ultrasonic tool horn. The FEM analysis result is then incorporated into the optimal design and manufacturing of the ultrasonic tool horn.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.7 no.1
• /
• pp.28-32
• /
• 2014

Purpose: We aim to determine sciatic nerve bifurcation location and depth at the level of the popliteal fossa in Korean female. Materials and Methods: Thirty three subjects were enrolled in Korean female. M-turbo ultrasound system (SonoSite, bothell, WA, USA)with 38 mm high frequency linear array transducer, 13-6 MHz probe was used for ultrasound measurements. With subject lying prone, the location of the sciatic nerve in relation to the popliteal crease and skin to nerve distance were assessed via ultrasound. Analyses were performed with SAS version 9.3 using multiple linear regression. Results: Thirty three subjects were enrolled. Distance from the popliteal crease to the sciatic nerve was 4.5-7.5 (mean 5.7 cm), and the depth of the sciatic nerve from the skin was 1.8-3.2 (mean 2.4 cm). Multiple linear regression for the usefulness of the model has a p value of 0.036, shows between weight and depth. Conclusion: We show that variability exists for sciatic nerve bifurcation location in Korean female, The success rate is creased if consider the relations between weight and depth when performs sciatic nerve block in Korean female. In our study, a sciatic nerve block is recommend that performed 7.5 cm proximal to the crease in the popliteal fossa.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.225-233
• /
• 2004

The purpose of this study is to provide the geo-technical information by assessment of the in-situ rock strength using the reflected wave energy and travel time data acquired by the borehole acoustic scanner. In order to compare and analyze the relationship between the uniaxial compressive strength and the reflected wave energy, the laboratory test and the borehole acoustic scanning were conducted for the set of specimens, such as mortar, concrete, and rock samples which have different rock type. Finally, we verified the applicability of the reflected wave energy acquired by the borehole acoustic scanner to quantitatively estimate the in-situ rock strength.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.91-98
• /
• 2004

This paper presented results of the laboratory tests conducted to investigate ultrasonically enhanced flow rate using specially designed and fabricated equipment. Influencing factor, ${\alpha}_i$ was verified to investigate the effect of ultrasound on soil matrix and flowing liquid. The test conditions involve soil types, temperature and ultrasonic energy. The test results indicate that ultrasound enhances the flow rate significantly. The degree of enhancement and the values of influencing factors, however, vary with test conditions.