• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.195-198
• /
• 2008

Ultrasonic method is applied for measuring burning rates of the solid propellants, since it can measure burning rates as a function of pressure in a single test performed. However, to replace the stand burner method by the ultrasonic method, it is necessary to verify of its accuracy and reliability. In this study, we investigated the performance of the ultrasonic method for burning rate measurements by comparison to the strand burner results. Furthermore, we investigated the relation between the attenuations of solid propellants and data scattering in the measured burning rates.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.684-691
• /
• 2004

Various researches have been undertaken to develope a method of enhancing consolidation. This study investigated the effect of ultrasound on consolidation through a series of laboratory experiments. The tests were conducted using a specially designed and fabricated equipments which can apply ultrasonic energy on a soil sample at consolidation test. Specimens were prepared using a centrifuge facility, and test conditions included ultrasonic power and treatment time. The results of the study show that the effect of ultrasonic energy on consolidation is significant. The degree of significance varies with the test conditions. It could be concluded that the study showed potential application of ultrasound to enhance consolidation.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.171-176
• /
• 1998

The objective of this study was to re-evaluate ultrasound attenuation as an indicator of bone properties. Ultrasound attenuation(BUA), were measured in the three orthogonal directions of trabecular bone cubes, Measurements of bone mineral density(BMD) were made using quantitative computed tomography and apparent density by weighing bone specimens and measuring their volume. Ultrasonic modulus was calculated from the standard equation with apparent density and ultrasound velocity. Ultrasound attenuation at a frequency of 0.5 MHz and BUA were correlated with BMD and ultrasonic modulus in the anterior/posterior, medial/lateral, and superior/inferior directions. Analysis of correlations demonstrated that attenuation at 0.5 MHz was superior to BUA in describing both BMD and elastic modulus of trabecular bone. This result may be used to improve current ultrasound diagnostic techniques for assessing bone status.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.4
• /
• pp.567-576
• /
• 2017

In a performance-based design, the structural safety is estimated from pre- defined damage states and corresponding damage indices. Both damage states and damage indices are well defined for above-ground structures, but very limited studies have been performed on underground structures. In this study, we define the damage states and damage indices of a cut-and-cover box tunnel which is one of typical structures used in metro systems, under a seismic excitation from a series of inelastic frame analyses. Three damage states are defined in terms of the number of plastic hinges that develop within the structure. The damage index is defined as the ratio of the elastic moment to the yield moment. Through use of the proposed index, the inelastic behavior and failure mechanism of box tunnels can be simulated and predicted through elastic analysis. In addition, the damage indices are linked to free-field shear strains. Because the free-field shear strain can be easily calculated from a 1D site response analysis, the proposed method can be readily used in practice. Further studies are needed to determine the range of shear strains and associated uncertainties for various types of tunnels and site profiles. However, the inter-linked platform of damage state - damage index - shear wave velocity - shear strain provides a novel approach for estimating the inelastic response of tunnels, and can be widely used in practice for seismic designs.

• Journal of radiological science and technology
• /
• v.27 no.3
• /
• pp.51-58
• /
• 2004

The gel, which is stained on probe after ultrasonography, is a good circumstances for proliferation of microbe. This study is to investigate into the actual state of sanitary management, recognition degree and infection level of ultrasonographic probes. We had performed a question with telephone to 42 hospitals in Seoul area from December in 2003. We also cultured to obtained a sample from three ultrasonographic units to investigate infection level of the probes. Sanitary management of the probes was performed in 21 hospitals with alcohol cotton. Sanitary management was performed daily in 14 hospitals. Most hospitals used cotton towel for clearing of gel stained on probes. Preventive management against infection was performed in 32 hospitals with vinyl cover, surgical glove, or alcohol sterilization etc. In the recognition degree on infection, the response that using method of ultrasonographic probes is insanitary were in 78.6%(33 hospitals), and 54.8%(23 hospitals) responded that bacteria can be infected through the probes. In the results of germiculture, bacteria and fungi were detected too number of to count, but escherichia coli was not detected. In conclusion, The gel stained on probe after ultrasonography must be cleared completely, and it is necessary that change of recognition on sanitary management.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.243-246
• /
• 1998

집속음장의 고조파성분을 이용한 초음파영상의 특성을 해석하기 위해 집속된 가우스 음원에 직선 edge를 초점면 및 초점면의 전, 후방에 삽입하여 edge의 후방에서 생성되는 음장을 조사하였다. 계산에서는 그린함수의 간단화를 위해 Fresnel근사를 이용하였고, 실험에서는 성형전극을 형성시킨 1.9MHz 요면진동자에 의한 가우스분포의 음장을 갖는 초음파빔에 수직하게 edge를 삽입시켰다. 음장의 이론해석 및 실험결과, 초점면의 제2고조파의 빔형상을 제외하고는 계산치와 실험치가 잘 일치하고 있으며, 제2고조파의 공간 분해능이 기본파에 비해 높음을 알았다.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.311-318
• /
• 1988

초음파센서(수신기)에 응용가능한 압전세라믹스를 제조하기 위하여 Ba변조된 Pb(ZR, Ti)O$_{3}$계 세라믹스에 MnO$_{2}$를 첨가하여 첨가량과 소성온도에 따른 영향을 조사하였다. 또한 제조된 압전세라믹스를 이용하여 초음파 수신기를 제작하여 수신특성을 확인하여 보았다. 그 겨로가 MnO$_{2}$가 0.4(wt%)첨가되었을 때 압전 g정수가 가장 크고 수신감도가 우수한 것으로 밝혀졌다.

• Clinical and Experimental Pediatrics
• /
• v.46 no.2
• /
• pp.137-142
• /
• 2003

Purpose : This study was performed to determine the sensitivity of neonatal electroencephalography (EEG) in detecting underlying brain disease, to compare the sensitivity and specificity of EEG with those of brain ultrasonography and to determine the prognostic value of EEG for neonatal neurologic diseases. Methods : Eighty-seven newborn babies were subjected to a electroencephalographic examination for the evaluation of underlying neurological diseases and EEGs were recorded at least before three days of life. The findings of early ultrasonography performed within three days after birth were compared with those of magnetic resonance imaging(MRI) or ultrasonography after seven days of life. Results : The EEG results were more sensitive and specific than ultrasonography for the detection of neonatal brain damage. The EEG results showed 91.7% sensitivity for mild grade neurological sequelae and 100.0% sensitivity for moderate and severe-grade neurological sequelae in predicting the neurological outcome. However, early ultrasonography results showed 20.8% and 18.8% of sensitivity and specificity, respectively. Conclusion : EEG is a highly sensitive diagnostic tool for detecting neonatal brain disease and is valuable for predicting the long-term outcome of neurologic sequelae.

• Journal of the Korean Society of Radiology
• /
• v.7 no.6
• /
• pp.433-439
• /
• 2013

In this study, human head-mimicking phantom was developed for brain disease treatment study using focused ultrasound. Acoustic parameters of skin, skull and brain were investigated through literature investigation and adequate substitutes according to each tissue were suggested. In the case of skin phantom, construction ratio of glycerol-based TMM phantom was controlled to mimic real skin. The suitability of skull substitutes was evaluated through measurement of acoustic parameters. In the case of brain phantom, transparent egg white phantom was used to observe thermal properties of focused ultrasound. Combined human-head-mimicking phantom using each substitutes was fabricated for development of brain disease treatment protocol. Denaturation of brain phantom according to ultrasonic condition was observed for validation.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.886-892
• /
• 1997

There are many methods to synthesize polystyrene latex. Emulsion polymerization technique is commonly used commercially, but it requires a new technology to replace a traditional polymerization method because of the disadvantage of chemical initiator for environmental pollution. Since free radicals can be produced by ultrasound energy effect, polystyrene latex was synthesized using ultrasound energy instead of chemical initiator. As the ultrasonic irradiation time was increased, average molecular weight was increased and polydispersity was decreased. The degree of polymerization was increased with the concentration of SDS and maximum degree of polymerization was shown at 2wt.% SDS concentration and the reaction temperature of $40^{\circ}C$. During the course of polymerization, molecular weight was repeatedly fluctuated because of occurrence of depolymerization. Narrow molecular weight distribution polystyrene latex having controlled molecular weight was synthesized by controlling ultrasonic irradiation time and the concentration of SDS.