• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.285-293
• /
• 1999

본 논문에서는 인버터를 사용하여 진행파형 초음파 모터를 구동할 때에 구동 주파수, 위상차 및 상간의 전압을 제어하기 위해 새로운 방식의 초음파 모터 구동용 디지털 제어기를 제안하였다. 제안된 디지털 제어기는 주파수 발생과 위상차 제어를 하기 위하여 기존의 제어기에서 사용한 디지털-아날로그 혼합 방식이 아닌 디지털 논리에 의하여 출력이 발생되며 이로 인하여 제어기의 구성이 대폭 단순해진 특징을 갖는다. 제안된 디지털 제어기는 두 가지 형태로 주파수와 위상만을 제어하기 위한 경우와 상간의 전압까지 제어하기 위한 경우로 분리하였다. 실험에서는 상용 LSI와 EPLD를 사용하여 구현된 단순화된 디지털 제어기의 성능을 평가하였다.

• NEWSLETTER 전기공업
• /
• 97-10호통권179호
• /
• pp.15-29
• /
• 1997

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.3-12
• /
• 1999

• E2M - 전기 전자와 첨단 소재
• /
• 제11권2호
• /
• pp.153-157
• /
• 1998

• 기계와재료
• /
• 제18권4호통권70호
• /
• pp.49-63
• /
• 2006

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2723-2731
• /
• 2000

Ultrasonic motors(USM) has been emerging as one type actuators, which possess many advantages such as high torque, low weight, compact size and no magnetic field generation. In spite of these features, there are several problems to be solved, which are temperature rise in case of long term operation, non -linearity, and hysteresis. Among these, hysteresis cause the most serious problem in force/torque control applications. To cope with this paper we propose a new PWM driving method which can be applied to force/torque control applications. To cope with this problem, in this paper we propose a new PWM driving method which can applied to force/torque control of USM. To verify the proposed method, an experimental setup was built and several experiments were performed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.607-608
• /
• 2006

This article deals the development of Agile and Intelligent Manufacturing System(AIM) for the assembly automation of a tiny ultrasonic actuator used in camera phones and PDAs. The system consists of multi-vision modules, end-effectors, a standard base frame, dispensers, jigs and modular manipulators. Subsystems are a vision system, a force control system and a virtual reality system. Experimental results show that the assembly process for the small components in the various IT applications can be realized by the AIM system.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권10호
• /
• pp.433-437
• /
• 2005

This paper studied Rotary type ultrasonic motor which has cross type stator. The stator consists of hollowed cross type metal which has four piezoelectric ceramics on the ends of cross bars. When two harmonic voltages which have 90$^{\circ}$ phase difference given to ceramics, the elliptical motion was generated in the inside tips. Inside tips are contact with rotor and these elliptical motions are rotate the rotor The finite element analysis was used to optimize the dimension and displacement of the stator. And the analyzed results were compared with the experimental results of the motor. As results, the speed and the torque of motor was increased by increasing width of the cross bar. And the speed and torque o( motor was not influenced to length of cross bar. The speed and torque was linearly increased by increasing voltage. The maximum torque was generated when the motor fabricated length of cross bar and width of ceramics in the ratio of 1:2.

• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.280-285
• /
• 2000

The conventional ultrasonic linear motors developed so far utilize a standing wave and are of a pi-type or a hybrid transducer type structure. Traveling wave type bi-direction linear motors have not been developed yet. This paper describes design of a new bi-directional ultrasonic linear motor working by means of a traveling wave. With the finite element method we design and verify validity of the new structure. And we determine its optimal structure size of design variables material and boundary conditions for proper generation of the traveling wave.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.305-308
• /
• 2002

This paper presents design and analysis of stator which is vibration source of ring-type ultrasonic motor. The stator were designed for 9th flexural vibration mode. Designed stator was simulated by FEA for changing its materials. As results, the resonance frequencies of stators were changed by Poisson's ratio and density. And higher displacement were obtained by using the materials of low Young's modulus. Using the results, can easily design and manufacture the stator of ring type ultrasonic motor. And we suppose that it can save the time and finances.