• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.37-38
• /
• 2018

본 논문에서 제안하는 시각장애인용 스마트장갑은 시각장애인들이 지팡이를 사용할 때 발생하는 불필요한 접촉을 방지하고, 초음파센서를 이용해 전방의 장애물을 탐지하여 서보모터를 이용해 손등을 두드려 장애물의 유무를 알려준다. 또한 손가락에 있는 정전식 근접 터치 모듈은 손가락끼리 접촉하였을 때 블루투스로 연결된 스마트폰의 특정 어플리케이션을 실행하여 길을 잃거나 긴급 상황이 발생 했을 때 시각장애인도 불편함 없이 문자나 전화를 이용할 수 있도록 고안하였다.

• ICROS
• /
• v.21 no.2
• /
• pp.25-30
• /
• 2015

본 논문에서는 간병인의 도움없이 자가 보행 재활에 효과적으로 사용될 수 있는 새로운 개념의 가슴 착용형 로봇을 개발하였다. 개발된 로봇의 특징은 크게 세 가지로 나뉜다. 첫째, 구조적 특징으로써, 하박에 착용하는 기존 지팡이 타입의 엘보 크러치와 달리 개발된 로봇은 가슴에 착용되어 착용자의 두 팔을 자유롭게 하는 동시에 팔의 부담을 제거하여 준다. 둘째는 구동 알고리즘의 특징으로써, 가슴부에 부착된 압력센서로부터 사용자의 보행의도를 자동적으로 인식하여 로봇의 다리를 이동시킨다. 또한 착용자의 안전을 위해 초음파 센서를 이용하여 착용자 전방에 장애물이 나타날 시 보행을 멈추고 경고음을 발생시킨다. 마지막으로, 스카치요크 메커니즘을 사용하여 지지다리의 상승과 하강 시 지면 반발력으로 인하여지지 발 상/하강 모터에 과도한 토크가 부과되지 않도록 하였다. 이러한 세 가지 특징으로부터 개발된 로봇이 자가 보행 재활에 효과적으로 사용될 수 있음을 실험적으로 보였으며, EMG (Electromyography) 센서를 이용하여 근력 보조 성능을 정량적으로 검증하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.1
• /
• pp.33-38
• /
• 2003

This paper describes control principles of the piezoelectric ultrasonic motor which is operated by the ultrasonic vibration generated by the piezoelectric element. The piezoelectric ultrasonic motor has excellent characteristics such as compact size, noiseless motion, low speed, high torque and controllability, and has been recently applied for the practical utilization in industrial, consumer, medical and automotive fields. In this paper, the design of two-phase push-pull inverter for driving the piezoelectric ultrasonic motor is described, and a new control method of automatic resonant frequency tracking using PLL(Phase-Locked Loop) technique is mainly presented. the experimental results by this inverter system for driving the piezoelectric ultrasonic motor are illustrated herein. The inverter system with PLL technique improved the speed stability of the piezoelectric ultrasonic motor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.976-981
• /
• 2009

This paper proposed optimal design and microcontroller driver for driving the thin-type ultrasonic motor. To find the optimal size of the stator, motions of the motor were simulated using ATILA by changing length, width and thickness of the ceramics. Two sinusoidal waves which have 90 degree phase difference were needed for driving the thin-type motor. The thin-type ultrasonic motor driver was composed of microcontroller(Atmega128), push-pull inverter, encoder and AD-converter. Microcontroller generates four square waves which have variable frequency and 25[%] duty ratio in $20{\sim}150$[kHz]. The output signals of microcontroller were converted to sine wave and cosine wave by push-pull inverter and were applied to the thin-type ultrasonic motor. The encoder and AD-converter were used for maintaining speed of the thin-type ultrasonic motor. The AD-converter controlled DC voltage of inverter in accordance with output signal of encoder. Using the driver, characteristics of the motor as speed and torque were measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.204-207
• /
• 2000

An ultrasonic linear motor was composed of a slider and a stator vibrator including piezoelectric material and elastic material. The ultrasonic linear motors mainly consist of an ultrasonic vibrator which generates elliptical oscillations. L$_1$-B$_4$ ultrasonic linear motor use longitudinal and bending multi-vibration. In order to low driving voltage and improve the life time of the ultrasonic oscillator, we used stacked piezoceramics. Stacked piezoceramics are adhered to aluminum elastic material. The finite element method was used to optimize dimension of ultrasonic vibrator and direction of vibratory displacement. As a result of estimating the characteristics of the ultrasonic linear motor, no-load velocity was 2.04[m/s] when applied voltage was 70[V$\sub$rms/] in resonance frequency.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.949-952
• /
• 1996

The ultrasonic motor(USM) has good characteristics such as compact size, silent motion, low speed, high torque and high speed response. The USM is driven by 2-phase AC electricity. The control parameters of USM are voltage, phase difference, frequency of input power, etc. In this paper, we propose voltage difference control. And we designed USM controller to adjust voltage and phase using pLSI(programmable Large Scale Integration). Voltage difference control has many advantages that are lower current, lower power than phase difference control. Especially there is nearly zero ampere at the zero point of speed and torque. we can apply this voltage difference control to the compliance control of DD manipulator.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.729-731
• /
• 2003

This Paper describes for vibration characteristic analysis by mode variation of ring type ultrasonic motor. Design for piezoelectric ceramic and elastic body of stator was calculated by Atila using the finite element method(FEM) that considers the resonance frequency, vibration mode and coupling efficiency etc. The propriety of this paper was established through simulation and experiment results of ring type ultrasonic motor.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.96-97
• /
• 2007

A stator of ultrasonic motor of high torque with a new configuration is proposed. The stator designed newly is two sided vibrator consisting of toothed metal disk with piezoelectric ceramic ring bonded on both face of disk. which generates a flexural traveling wave along the circumference of disk. it produces a large vibrating force and amplitude because the vibrator is sandwiched by two piezoelectric ring. The finite element method was used to compute the vibration mode of the stator with a outer diameter of 48mm. A 6th vibration mode was chosen as operation mode with resonance frequency about 72kHz. According to the design, the prototype stator was fabricated and its performance was measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.263-265
• /
• 2007

An ultrasonic linear motor using lambda shape vibrators has been designed and fabricated. The multiway ultrasonic motors mainly consist of an lambda shape ultrasonic vibrator which generates elliptical motions in beat. The lambda shape ultrasonic linear motor use longitudinal and bending vibration mode. In order to high precision motion control and multiway moving, piezoceramics were adhered to lambda shape brass elastic material. The finite element method was used to optimize dimension of ultrasonic vibrator and direction of vibratory displacement. As a result of estimating the characteristics of the ultrasonic linear motor, The results have shown that the lambda shape ultrasonic linear motor can be moved multiwav by using the phase control. Close agreement between the FEM results and experimental results obtained for the lambda shape ultrasonic linear motor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.318-319
• /
• 2007

In this study, novel structured thin ultrasonic rotary motor has been proposed. Ultrasonic motors are based on an elliptical motion on the surface of elastic body. ATILA ver. 5.2.4 was used for optimizing stator. The motor was fabricated by using designed stator. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, 935[rpm] speed was obtain by input voltage of 25[Vrms] at 93.5[khz].