• 제목/요약/키워드: 초음파기기

검색결과 211건 처리시간 0.022초

시각장애인의 보행보조를 위한 스마트폰 케이스 구현 (Development of Walking Assist Smartphone Case for Blind People)

  • 최진우;정구민
    • 한국정보전자통신기술학회논문지
    • /
    • 제8권3호
    • /
    • pp.239-242
    • /
    • 2015
  • 시각장애인들은 외출을 하기 위해 보행 보조기기를 사용하고 있다. 또한, 최근에는 보행 보조기기뿐만 아니라 음성인식 명령기능을 탑재한 스마트폰도 이용하고 있다. 이러한 추세에 따라, 본 논문에서는 시각장애인 보행 보조를 위한 스마트 폰 케이스를 설계하고 구현하였다. 조도 센서와 스마트폰 카메라 플래시를 이용하여 어두운 장소에서 자신의 위치를 알려주는 자기 위치 알림 시스템과 초음파 센서를 이용하여 장애물을 감지하고 시각장애인들에게 음성으로 경고를 해주는 음성 경고 시스템을 제공한다. 이를 이용하면 시각장애인은 어두운 곳에서 자신의 위치를 알리고, 전방의 장애물을 피해갈 수 있어서 보다 안전하게 보행하여 사고를 방지할 수 있다.

유도초음파를 이용한 3/4″ 배관 결함 검출 연구 (A Study for Flaw Detection of 3/4″ Pipe by Using Guided Wave)

  • 정우근;김진회;천근영
    • 한국압력기기공학회 논문집
    • /
    • 제15권1호
    • /
    • pp.40-45
    • /
    • 2019
  • Unlike the welded pipes in the primary system of light water nuclear power plants being periodically inspected with in-Service inspection program, relatively small pipes with the outer diameter less than 2 inch have not been regularly inspected to date. However, after several failure reports on the occurrence of critical crack-like defects in small pipes, inspection for the small pipes has been more demanded because it could cause the provisional outage of nuclear power plants. Nevertheless, there's no particular method to examine the small pipes having access limitations for inspection due to various reasons; inaccessible area, excessive radiation exposure, hazardous surrounding, and etc. This study is to develop a reliable inspection technique using torsional and flexural modes of guided wave to detect defects that could occur in inaccessible area. The attribute of guided wave that can travel a long distance enables to inspect even isolated range of the pipe from accessible location. This paper presents a case study of the evaluation test on 3/4" small-bore pipes with guide wave method. The test result demonstrates the crack signal behavior and assures possibility to detect the crack signal in a flexural mode, which is clearly distinguishable from the symmetric structure signal in a torsional mode.

소아과 의사에 의해 시행된 복부 초음파 검사 1,000예에 대한 분석 (Analysis of 1,000 Cases of Abdominal Ultrasonography Performed by a Pediatrician)

  • 배상인;박재홍
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • 제10권1호
    • /
    • pp.28-35
    • /
    • 2007
  • 목 적: 소아에서 초음파 검사는 복부 질환의 진단에 중요한 역할을 한다. 소아의 특성을 잘 알고 있는 소아과 의사에 의해 시행된 복부 초음파 검사의 경험을 분석하였다. 방 법: 2003년 1월부터 2005년 6월까지 부산대학교 병원 소아과에서 복부 질환의 증상으로 내원하여 복부 초음파 검사를 받았던 1,000명의 환자를 대상으로 병력지와 초음파 검사 소견을 후향적으로 분석하였다. 초음파 검사는 1명의 소아과 의사에 의해 시행되었으며 초음파 기기는 Sequoia System$^{(R)}$을 이용하고 3종류의 탐촉자를 사용하였다. 결 과: 남아가 584명(58.4%), 여아가 416명(41.6%)이었고, 평균 연령은 $4.7{\pm}4.0$세였다. 1세 미만이 274명 (27.4%), 1~5세가 310명(31.0%), 6~10세가 267명(26.7%), 11세 이상이 149명(14.9%)이었다. 내원 시 주증상은 복통이 439명(43.9%)으로 가장 많았고, 구토, 간 효소치의 증가, 황달, 설사, 복부팽만 등이 있었다. 검사 결과 정상 소견이 421명(42.1%), 비정상 소견이 579명(57.9%)이었다. 비정상 소견으로는 장간막 림프절염이 182명(31.5%)으로 가장 많았고, 그 외 지방간, 간염, 간비종대, 장중첩증 등이 있었다. 복통으로 검사한 경우는 장간막 림프절염이 32.6%로 가장 많았고, 그 외 장중첩증, 급성 충수돌기염, 요로결석, 급성 췌장염, 담석 등이 있었다. 구토로 검사한 경우는 장간막 림프절염이 12.7%명으로 가장 많았고, 그 외 특발성 유문협착증, 급성 충수돌기염, 장폐쇄증 등이 있었다. 간효소치 상승으로 검사한 경우는 지방간이 30명(25.4%)으로 가장 많았고, 그 외 간염, 총 담관낭, 간외 담도 폐쇄, 간경변증 등이 있었다. 비뇨생식계 질환과 관련된 55예의 초음파 검사 소견 중에서는 수신증이 25명 (45.4%)으로 가장 많았고 신결석, 낭종성 신질환, 종양 등이 있었다. 결 론: 소아에서 복부 초음파 검사는 복부 질환의 진단에 있어서 간편하고, 신속하며, 비침습적이며, 선별검사로 진단적 가치가 높다. 소아에서 복부 초음파 검사는 소아과 의사가 검사할 경우 보다 빨리 그리고 필요할 때 즉시 시행할 수 있으며, 환자의 경과 관찰을 위한 검사에도 효율적이다.

  • PDF

위암 조직의 자기공명영상과 초음파 소견에 대한 비교 연구 (In Vitro Imaging of MRI and Ultrasound for Gastric Carcinoma)

  • 길성원;지금난
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권2호
    • /
    • pp.178-187
    • /
    • 2008
  • 목적 : 위암 조직의 종양 침범 깊이와 주위 조직으로의 침윤 정도를 초음파와 자기공명영상을 시행하여 그 진단적 유용성을 알아보고 자기공명영상의 경우 종양을 가장 잘 보여주는 펄스 연쇄에 대해 알아보고자 하였다. 대상 및 방법 : 위의 부분 혹은 전절제술을 받아 병리적으로 위암으로 확진된 53예의 제거된 위암 조직을 대상으로 하였다. 모든 조직은 자기공명영상과 고주파수 탐촉자로 초음파 영상을 얻었다. 각 조직에 대하여 자기공명영상과 초음파 소견을 각각 독립적으로 종양의 탐지 및 종양의 침범 깊이에 대하여 두 명의 방사선과 전문의가 합의하에 평가하였고 각각의 영상 소견을 병리 조직 소견과 비교하여 두 영상 기기 간에 진단의 정확도를 비교하였다. 자기공명영상은 스핀에코 T1 강조 영상, 위상 및 탈위상 경사에코 T1 강조영상, 고속스핀에코 및 단발포고속스핀에코 T2 강조영상의 다섯 펄스 연쇄를 얻었고 이 중 종양의 탐지와 묘출에 우수하다고 평가된 영상 기법을 알아보았다. 결과 : 조기 위암의 경우, 초음파 진단의 정확도는 77%로 자기공명영상의 진단적 정확도 59% 보다 우수하였으나 통계적으로 유의한 차이는 없었다 (p=0.096). 진행성 위암의 경우 자기공명영상이나 초음파 각각 97%와 84%의 높은 진단적 정확도를 보여주었으며 자기공명영상이 초음파에 비하여 통계적으로 유의하게 종양병기를 정확하게 진단했다 (p<0.001). 자기공명영상의 다섯 가지 펄스연쇄 중에 종양 침윤 깊이를 선명하고 정확하게 보여준다고 평가된 영상은 조기 위암과 진행성 위암 모두 고속스핀에코 T2 강조영상(75%)이었고, 특히 진행성 위암의 경우 총 93.5%에서 고속스핀에코 T2 강조영상이 우수한 영상 소견을 보였다. 결론 : 자기공명영상과 초음파는 진행성 위암 조직의 종양 병기를 평가하는데 높은 진단적 정확성을 갖고 있으며 자기공명영상이 초음파보다 통계적으로 유의하게 종양병기를 정확하게 진단했다. 위암 조직의 종양 병기를 평가하는데 가장 우수한 자기공명영상 기법은 고속스핀에코 T2 강조영상이었다.

  • PDF

임피던스 위상각제어를 적용한 초음파모터의 구동을 위한 새로운 제어방식에 대한 연구 (A Study on the Novel Control Method to Drive the Traveling Wave Type Ultrasonic Motor adapting the Impedance Angle Control)

  • 이을재;김영석
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권6호
    • /
    • pp.450-456
    • /
    • 2000
  • In this paper, we proposed a novel control method which uses the internal impedance angles as a control parameter to drive traveling wave type ultrasonic motor. An impedance characteristic of the ultrasonic motor is obtained by analysis of the equivalent circuits including the external inductor used to generate the coupled resonance. The phase angle of internal impedance to achieve optimal control performance is derived. For the tracking of impedance angle, an information of phase difference is obtained from the applied voltage and current. The high speed phase difference detector is designed to monitor the phases of ultrasonic motor. The effectiveness of the proposed control scheme is clarified by experiments.

  • PDF

Time Scaling 방법을 이용한 초음파 보행 보조기기 (Ultrasonic Mobility Aids for the Blind using Time Scaling Method)

  • 양호;양태현;고한우;김원기
    • 대한의용생체공학회:의공학회지
    • /
    • 제8권1호
    • /
    • pp.7-12
    • /
    • 1987
  • In this paper, we proposed the time scaling method for the ultrasonic aids for the blind. This system is simplified by using the analog delay line(BBD) for the time scaling of echo signals and the experimental results show the propsed method is superior to the conventional frequency mapping method.

  • PDF

두 개의 정현 신호를 이용한 속도 측정용 고전력 쏘나 시스템 개발 (Development of a High Power SONAR System Measuring Velocity by Using Two Gated Sinusoidal Signals)

  • 장순석;안흥구;이제형
    • 소음진동
    • /
    • 제9권5호
    • /
    • pp.1036-1041
    • /
    • 1999
  • This paper aims for the development of the high power sonar system for measuring the velocity of a moving object. The high power sonar system transmits two gated 190 kHz sinusoidal signals with 1.6 [ms] time interval to the moving object. Then the sonar system detects and calculates the changed time delay of the reflected ultrasonic signals in order to derive the velocity of the moving object. The transmission part uses a high power amplifier so that 250 W gated sinusoidal signals can be transmitted to the transmitter. 1M RAM is utilized for transmitting and storing of the ultrasonic signals. The time delay is calculted by the cross-correlation technique between the transmitted signals and the received signals. The measured value from the high power sonar system is compared with directly measured values by photo diodes. The result confirms the adjacency to 0.3% error.

  • PDF

링형 초음파모터의 고정자 해석 및 설계 (The Stator Analysis and Design of Ring Type Ultrasonic Motor)

  • 윤신용;백수현;김용;김철진;김현일
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권10호
    • /
    • pp.484-490
    • /
    • 2003
  • This paper describes with the stator analysis and design of a ring type ultrasonic motor. The design for piezoelectric ceramic and elastic body of stator were calculated by using the finite element method (FEM) that consider the resonance frequency, vibration mode and coupling efficiency. Namely, such results were acquired the calculation result of the piezoelectric ceramic thickness 0.5[mm], elastic body thickness 2.0[mm], resonance frequency 51.8[kHz], vibration mode 7 order and coupling efficient 12.5[%], the outer and inner diameter of vibrator 50[mm], 38[m]. On the basis of such result, the ring type ultrasonic motor was manufactured. Also for driving characteristics of ring type ultrasonic motor, 2-phase inverter was constructed. Then the propriety of this paper was established from comparision of the simulation and an experiment results of the ring type ultrasonic motor.

첨단기술 기반기업(NTBF)의 지속적 성장을 저해하는 주요 요인 분석 -역동적 기업 역량(DFC)의 시각에서- (Impeding on NTBF′s Sustainable Growth: The Case of Medison)

  • 손찬;정재용
    • 기술혁신학회지
    • /
    • 제6권2호
    • /
    • pp.228-252
    • /
    • 2003
  • This research has been focused upon and analyzing Medison, once a leading New Technology-Based Finn (N1BF) in Korea with exceptionally advanced technology in 3D ultrasound diagnostic imaging devices (UDIDs) (armored with 23 subsidiaries at its peak expansion), from the perspective of Dynamic Finn Capability(DFC). The underlying hypothesis is that the various problems from its pointless pursuit of the business styles or precedents of the existing large firms might be traced to its specific characteristics as an NTBF, which should have more preferably been based upon the distinctive competences such as differentiated technologies, institutional linkages, organizational routines, and complementary assets, etc. In conclusion, for the NTBFs with different DFC domains from those of the large firms, the optimal external linkages and comprehensive integration efforts (Process) under their specific organizational characteristics and constraints (path) are highly recommended for the continuous accumulation of their core capabilities based upon the technological assets (Position).

  • PDF

PLL을 이용한 압전 초음파 모터의 구동회로에 관한 연구 (A Study on the Driving Circuit of Piezoelectric Ultrasonic Motor Using PLL Technique)

  • 김남현;강종윤;;강종윤;고태국
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권1호
    • /
    • pp.33-38
    • /
    • 2003
  • This paper describes control principles of the piezoelectric ultrasonic motor which is operated by the ultrasonic vibration generated by the piezoelectric element. The piezoelectric ultrasonic motor has excellent characteristics such as compact size, noiseless motion, low speed, high torque and controllability, and has been recently applied for the practical utilization in industrial, consumer, medical and automotive fields. In this paper, the design of two-phase push-pull inverter for driving the piezoelectric ultrasonic motor is described, and a new control method of automatic resonant frequency tracking using PLL(Phase-Locked Loop) technique is mainly presented. the experimental results by this inverter system for driving the piezoelectric ultrasonic motor are illustrated herein. The inverter system with PLL technique improved the speed stability of the piezoelectric ultrasonic motor.