• Journal of Veterinary Clinics
• /
• v.10 no.2
• /
• pp.199-202
• /
• 1993

The purpose of this study was to make fundamental ultrasonographic observations of kidney and urinary bladder in Korean native goat. The position, dimensions, and structure of the kidneys and bladders In 7 male Korean native goats were determinded by use of ultrasonography. A 3.5%.MHz linear transducer was used. All examinations were performed on goats in lateral recumbency under sedation. The left kidney was 4.2 to 5.9 cm long, 2.5 to 3.6 cm wide, and 2.4 to 3.2 cm deep. Diameter of the parenchyma and renal sinus of the left kidney ranged between 0.7 and 1.3 cm and 0.7 and 1.4 cm, respectively. Circumferences of the medullary Pyramids varied between 1.3 and 1.9 cm. Similar ultrasonic measurements were obtained for the right kidney. The diameter of the urinary bladder varied between 2.1 and 5.4 cm in the goats. It was concluded that the ultrasonographic findings described in this study can be used as references for diagnosis of morphologic changes in the kidney and urinary bladder of Korean native goat.

• Korean Journal of Head & Neck Oncology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 2002

Objectives: This study was done to determine the diagnostic efficacy of fine needle aspiration cytology (FNA), frozen section biopsy (FSx) and ultrasonography in a palpable thyroid mass. Materials and Methods: During the period from July 1999 to March 2002, the medical records of 98 patients who underwent a thyroidectomy for thyroid mass, at the Department of Surgery, Chonbuk National University Hospital, were reviewed retrospectively. Ninety eight cases were classified according to whether the FNA cytological diagnosis inadequate, benign, suspicious, or malignant and the FSx diagnosis benign or malignant and the ultrasonographic examination was benign, suspicious, or malignant. The diagnostic correlations of ultrasonography, FNA cytology, frozen section, and both FNA cytology and frozen section with definite histologic diagnosis were evaluated. Results: According to the FNA cytological interpretation, 76 cases were diagnosed as benign, 6 cases suspicious, 13 cases malignant, and 3 cases inadequate. The sensitivity and specificity for FNA were 86.3% and 95.9% and for FSx 95.5% and 100% respectively. The diagnostic accuracy of FNA and FSx were 93.5% and 98.9% respectively. Based on a definite histologic diagnosis, the ultrasonographic examination had a sensitivity and a specificity of 77.2% and 78.9%. Conclusion: The results confirm that FNA cytology is a reliable and useful tool in the initial evaluation of a palpable thyroid mass compared to the ultrasonographic examination. Intraoperative FSx is a valuable diagnostic procedure to confirm the cytological diagnosis with undetermined or unsatisfactory cytological diagnosis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.120-127
• /
• 2016

Several problems including respiratory and skin disorders due to the problems for sick house syndrome have occurred, there appears echo friendly materials to solve the problems. The research is lacking in quality management techniques ocher concrete using nondestructive tests. In this research, the experimental works were conducted to study the initial quality control for the compressive strength of Ocher concrete(21 MPa). The purpose of this study is the implementation platform for quality management of ocher concrete using nondestructive tests. It uses the relationship between the compressive strength and ultrasonic pulse velocity of the ocher concrete to estimate the compressive strength of the ocher concrete. And using the impact echo method to estimate the thickness of the ocher concrete. The platform is based on a Java script, so that the user can obtain the data through the platform.

• Journal of Veterinary Clinics
• /
• v.11 no.2
• /
• pp.593-598
• /
• 1994

본 연구의 목적은 초음파검사에 의하여 한국재래산양의 간장 및 담낭의 정상적인 구조와 크기를 알아보는데 있다. 30두의 한국재래산양에서 간장, 문맥, 후대정맥 및 담낭의 크기, 위치 및 구조를 측정하였다. 30마리의 산양을 체중에 따라서 5-15Kg, 15-25Kg 및 25-35Kg군으로 분류하였다. 우측복벽의 제9늑간극으로부터 12늑간극까지에서 측정을 실시하였다. 각 늑간극에서의 간장의 크기, 후대정맥 및 문맥의 위치 및 직경을 관찰하였다. 본 연구에 있어서의 간장 크기 및 위치의 초음파 측정자료는 한국재래산양의 간장의 변화에 대한 진단에 있어서 기초자료로서 사용될 수 있다는 결론을 얻었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.1
• /
• pp.29-39
• /
• 1993

초음파탐상검사는 그 검사결과가 여타 비파괴검사법에 비해 검사자, 검사장비, 절차서 등 검사 시스템에의 의존도가 높으며, 이중에서도 특히 검사자의 능력과 숙련도에 크게 좌우된다. 따라서 검사결과의 신뢰도를 높이기 위해서는 무엇보다도 검사자에 대해 엄격한 자격인정(Qualification)이 필요하다. 초음파탐상검사는 원자력 발전소 기기의 가동전중검사시 가장 많이 적용하는 체적검사법으로써, 결함검출 및 평가의 신뢰도를 확보하기 위하여 최근 관련 기술기준에서는 검사자에 대해 보다 엄격한 자격인정을 요구함과 아울러 초음파탐상검사 시스템(검사자, 장비, 절차서)에 대한 기량검증(Performance Demonstration)까지를 요구하고 있다. 위의 두 가지 요건을 성공적으로 충족시킬 수 있다면, 초음파탐상기술의 신뢰도는 크게 향상될 것이다. 본고에서는 최근 보다 강화된 원전 가동전중검사 초음파탐상검사 요원의 자격인정요건에 대해 자세히 알아봄으로써 관련 국내 기술기준의 제정과 앞으로 국내 원전 초음파탐상 검사요원에 대한 본 자격인정요건의 적용에 대비코자 하였다. 한편, "초음파탐상검사 시스템에 대한 기량검증 요건"은 초음파탐상 검사요원의 자격인정 요건과 밀접한 관계가 있으므로 다음에 별도로 기술코자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.185-191
• /
• 2001

The aluminum die-casting technique has been widely used to manufacture a rotor in motor industry because of its highly productivity, even though it sometime causes the various type of defects in the rotor, such as shrinkage, cavity, blow holes etc. which results in the decrease of the efficiency of system. Therefore the development of reliable technique to detect the flaws in the rotor is strongly needed not only to control quality assurance but to improve its efficiency. In this study, the wide variety of ultrasonic techniques have been applied to detect the flaws in the rotor and then to discuss the detectibility of the flaw and the applicability for NDE tool in the aluminum die-casting rotor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.294-303
• /
• 2005

This paper describes the analysis results of a series f Round-Robin test that was performed to intercompare inspection and diagnosis techniques for characterization of pressure tube f a pressurized heavy water reactor under the Coordinated Research Project(CRP) of IAEA's nuclear Power Programme. For this test, six nations, Korea, Canada, India, Argentina, Rumania, and China that currently have pressurized heavy water reactors under operation involved, and the "KOR-1" pressure tube sample prepared by Korea was used. Two kinds of NDE technique, ultrasonic and eddy current test, were applied for these tests. The "KOR-1" pressure tube sample contains total 12 artificial flaws such as crack-like EDM notches, wear that is similar to the real flaws and can be produced on the pressure tubes during plant operation. Test results showed that seven laboratories from six nations detected all twelve flaws in "KOR-1" specimen by using ultrasonic and eddy current test methods, and ultrasonic test method was more accurate than eddy current test method in flaw detectin and sizing. ID flaws in pressure tube sample were more easily detected and accurately sized than OD flaws.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.197-205
• /
• 2018

Recently, remodeling is increasing due to aging of buildings. Therefore, the importance of quality control of structures has been raised, and interest in safety diagnosis and evaluation of structures has been increasing. In order to accurately diagnose old buildings, a diagnostic evaluation technique is needed to evaluate the defects of structures in advance. In addition, as the safety diagnostic criteria for reconstruction are improved and the weight of structural safety is increased, researches on safety diagnosis techniques of structures that are faster and more reliable are needed. In this study, we tried to estimate the compressive strength by examining the correlation between ultrasonic pulse velocity and compressive strength of a 1 story structure consisting of vertical and horizontal members of reinforced concrete using ultrasonic pulse velocity method, which is one of the nondestructive testing methods. The purpose of this study is to examine the applicability in the field. As a result, the estimated average error rate of the compressive strength of the structure using the ultrasonic pulse velocity method was 28.7%, which confirmed the applicability in the field. However, in order to increase the accuracy of the estimation, the necessity of the reliable diagnostic method using the composite nondestructive testing method was confirmed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.32-38
• /
• 2024

In the case of apartment building, it is difficult to conduct non-destructive testing due to the actual presence of people and the dust and noise generated during the core test, so inspections are performed each time in the common area and underground parking lot, and the tests are conducted on the finishing material rather than on the concrete surface due to low-cost orders. As the process progresses, poor inspection is inevitable. In addition, the proposed formulas for strength estimation have large fluctuations depending on the differences in test conditions and environments, and even if they show the same measured value, the deviation between each proposed formula is large, making it difficult to accurately estimate strength, making it difficult to use. Accordingly, we would like to select finishing materials mainly used in apartment complexes and compare and evaluate the compressive strength of concrete according to the type of finishing material by using non-destructive testing methods directly on the finishing materials without removing the finishing materials. The reliability evaluation results of the estimated compressive strength of concrete using the ultrasonic velocity method according to the type of finishing material are as follows. The error rate between the estimated compressive strength and compressive strength derived through the ultrasonic velocity method shows a wide range of variation, ranging from 21.83% to 58.89%. The effect of the presence or absence of finishing materials on the estimated compressive strength was found to be insignificant. Accordingly, it is necessary to select more types of finishing materials and study ultrasonic velocity methods according to the presence or absence of finishing materials, and to study estimation techniques that can increase reliability.