• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.25-28
• /
• 1993

This study is designed for analyzing the properties of super-workable concrete with the parmeter of water contens, S/A , superplasticizer kinds, superplasticizer dosage and cement replacement method of pozzolanic admixture. And this study is aimed for presenting the reference data in practical use of super-workable and high-performance concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.402-407
• /
• 1996

In this paper, we described the basic elements(flowability, fillingability, elapsed time, pumpability, no-vibrating effects, and etc.) required for the application and quality control of the super flowing concrete (SFC) in construction site. Also, after investigating characteristics of SFC through various experiments, SFC were placed in the reaction wall of large scale structural laboratory in Deawoo Insititute of Construction Technology. As the result of this project, the developed SFC showed high flowability and self-filingability good enough for the requirement. Furthermore, quality control and assurance of the no-vibrating concrete in actual site was verified by various testing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.649-656
• /
• 1997

The properties of super-flowing concrete with low heat cement were experimentally investigated and compared with ordinary 25-240-15 concrete with type Vcement. The cement content of super-flowing concrete with the low heat cement was 400 kg/$\textrm{m}^3$. However the hydration heat of super-flowing concrete is relatively lower than that ordinary concrete with type V cement. Also the ability to resist chloride ion penetration of super-flowing concrete with low heat cement is 5 times better than that of the ordinary concrete.

• 콘크리트학회지
• /
• 제22권1호
• /
• pp.65-70
• /
• 2010

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.95-100
• /
• 1996

This paper presents the experimental study on hardening process of high-strength and high-flowable concrete. The experiments were performed to investigate any unfavorable construction situations since the actual concrete placement has been scheduled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out. The tests were conducted using 600nm and 1000nm height of steel tube to simulate the practical concrete filled steel tube columns according to the following variables as: the categories of chemical admixtures, curing temperatures and curing schemes. The test results were analyzed in terms of hardening speed, internal heat of hydration and history of strength gain. This paper emphasizes the importance of curing schemes on durability and the use of hardening accelerators on strength gain.

• 콘크리트학회논문집
• /
• 제17권5호
• /
• pp.785-792
• /
• 2005

본 연구는 굵은골재의 입형불량과 잔골재의 조립률 저하가 초유동콘크리트의 특성에 미치는 영향을 검토한 것이다. 이론 위해 잔골재 조립률을 2.0, 2.5, 3.0, 3.5로 변화시키고 굵은골재는 입형개선전$\cdot$후 골재를 사용하여 초유동콘크리트의 유동검 및 충전성능을 검토하였다. 또한 골재입자의 분산거리를 상대비교 함으로써 잔골재의 조립률 및 굵은골재의 입형이 골재입자의 분산거리에 미치는 영향을 검토하였다. 실험 결과 굵은골재와 잔골재 혼합시의 최소공극률은 골재 입형개선 유무에 관계없이 잔골재 조립률 3.0, 2.5, 2.0, 3.5 순으로 나타나 조립률 KS 규정 값 $2.3\~3.1$보다 작거나 클 경우 공극률을 증가시키는 것으로 나타났으며, 굵은골재의 입형은 구형율 0.69의 원반상에서 구형율 0.78의 구상으로 개선할 경우 최소공극률을 나타내는 잔골재율을 $47\%$에서 $41\%$로 $6\%$ 감소시키는 것으로 나타났다. 잔골재 조립률에 따른 28일 압축강도 특성은 조립률 2.0에서 2.5, 3.0으로 증가할수록 약 3MPa씩 증가하였으나, 조립률 3.5에서는 3.0에 비해 약 9MPa 정도 감소하였다. 또한 굵은골재의 입형개선과 잔골재 조립률의 증가는 유동성, 충전성 및 V로드 상대유하시간을 향상시키는 것으로 나타났으며, 잔골재 조립률은 KS 규정 값 $2.3\~3.1$을 만족하는 범위내에서 높은 값을 사용하는 것이 페이스트 용적비를 증가시키는 것으로 나타났다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.202-204
• /
• 2002

The supurfluid shock tube facility has been developed as a versatile tool for experimental research of low-temperature thermo-fluid dynamic phenomena The shock tube is designed to operate with the He II filled test section which is immersed in superfluid helium. The thermo-dynamic phenomena occurred in this facility are measured using pressure transducers, superconductive temperature sensor and visualization method. In this paper, the design and performance of the superfluid shock tube facility and the superconductive temperature sensor is presented.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.27-30
• /
• 2002

The particle velocity in superfluid helium (He II) induced by a gas dynamic shock wave impingement onto He II free surface were studied experimentally by using Schlieren visualization method with an ultra-high speed video camera. It is found form visualization results that a dark zone in the immediate vicinity of the vapor-He II interface region is formed because of the high compressibility of He II and is developed toward bulk He II with the flowing-down speed of the vapor-He II interface. The mass velocity behind a transmitted compression shock wave that is equal to the contraction speed of He II amounts to 10 m/sec, the Reynolds number of which reaches $10^{7}$. This fact suggests that the superfluid shock tube facility can be applied to an experimental facility for high Reynols number flow as an alternative to the superfluid wind tunnel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.115-120
• /
• 1994

Recently super-flowing concrete has been developed and used in many construction sites in Japan. It is believed that super-flowing concrete will change the construction method and contribute to the durability of concrete structures. In this study the effect of mix proportion on the flowing characteristics of super-flowing concrete was investigated to establish the mix design method. From the result we have found that self-compactability of super-flowing concrete was greatly affected by the unit gravel volume and paste/gravel volume ratio. Therefore the two parameters can be used in mix design of super flowing concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1994년도 가을 학술발표회 논문집
• /
• pp.121-126
• /
• 1994

In this study, several rheological properties of binder pastes and concrete are investigated for the development of commercially available fly ash super-flowing concrete. Fly ash contents with 5 leves(0, 10, 20, 30, 40%), slag contents with 6 levels(0, 5, 15, 25, 35, 45%), and water-binder ratios with 4 levels(30, 33, 36, 39%) are selected for test variables to evaluate the super-flowing characteristics of binder pastes. For the estimation of the workability of super-flowing concrete, slump flow, funnel time, box height, and L-flow are measured and compared. As the results, the flow is decreased and the viscosity is increased with increasing fly ash content. Super-flowing concrete is succesfully produced with 30% fly ash replacement.