• Title/Summary/Keyword: 초소형 장치

Search Result 142, Processing Time 0.031 seconds

Charging circuit for Micro-Power Generator (초소형 전원발생장치를 위한 축전 회로)

  • Park, Ju-Han;Kim, Ho-Seong;Kim, Hye-Joong
    • Proceedings of the KIEE Conference
    • /
    • 2006.07c
    • /
    • pp.1625-1626
    • /
    • 2006
  • 본 논문에서는 초소형 전원발생장치의 구현 방법에 따라 최대 출력을 얻을 수 있는 충전회로를 제안하였으며, 초소형 전원발생장치의 등가회로를 제시하였다. 이를 바탕으로 시뮬레이션을 하여 실제 실험과 비슷한 출력을 얻어 내었고, 초소형 전원 발생장치를 압전소자를 이용하여 구현하는 경우에는 누설전류가 작은 다이오드를 사용해야 하며, 유도기전력을 이용하여 구현하는 경우에는 전압강하가 작은 다이오드를 사용해야 한다는 것을 시뮬레이션과 실험을 통하여 확인하였다.

  • PDF

초소형 광픽업용 하이브리드 마이크로 렌즈의 광성능 평가

  • 윤찬영;조은형;손진승;박노철;박영필
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.05a
    • /
    • pp.122-122
    • /
    • 2004
  • 최근 휴대폰, 디지털 카메라, 캠코더, MP3 플레이어, 노트북 PC 등 휴대용 디지털 기기의 보급이 확산되면서 휴대용 저장장치의 수요가 급증하고 있다. 휴대용 저장장치의 요구사항으로 초소형화, 대용량화를 들 수 있는데, 이를 만족할 수 있는 기술로 사용될 수 있는 것이 Blu-Ray를 이용한 광 저장장치이다. 초소형 광저장장치에 사용되는 3cm 디스크에는 1.5Gbyte를 기록할 수 있으므로 기존의 휴대용 저장장치에 비해 가격이 저렴하며 대량배포가 가능하다.(중략)

  • PDF

초소형 열교환기 기술

  • 이기우
    • The Magazine for Energy Service Companies
    • /
    • s.13
    • /
    • pp.50-55
    • /
    • 2001
  • 최근의 계속된 칩(Chip)기술의 발전으로 전자부품의 고성능화가 가능해 졌지만, 그에 따라서 부수적으로 전자제품으로부터 발생되는 열로 인한 많은 열적인 문제도 야기되었다. 칩자체의 초소형화와 고성능화는 전자, 통신, 항공 우주, 각종 에너지 시스템들의 소형화가 더욱 가능해졌고, 또한 이러한 시스템들의 열적인 문제를 해결할 장치들도 초소형화하는 제품들이 필요하게 되었다. 따라서 본 기술에서는 초소형 전자기기시스템(Micro-Electro Mechanical System) 기술의 발전에 따라 가공이 가능하게 된 초소형 열교환기(Micro Heat Exhanger)에 관한 기술을 초소형 채널 열교환기(Micro Channel Heat Exchanger), 그리고 초소형 히트파이프 열교환기(Micro Heat Pipe Heat Exchanger)와 같이 세 가지로 분류하여 그 기술의 현재와 앞으로의 전망을 소개하고자 한다.

  • PDF

Fabrication of a Micro Heat Pipe using Copper substrates (구리 모재를 이용한 초소형 히트파이프의 제작)

  • Cho, Hyung-Chul;Choi, Jang-Hyun;Park, Jin-Sung;Yang, Sang-Sik;Yoo, Jae-Suk
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1918-1920
    • /
    • 2001
  • 초소형 히트파이프는 고집적 반도체 소자에서 발생되는 열을 효과적으로 소산하기 위한 열교환 장치이다. 초소형 히트파이프는 작동유체가 상 변화 잠열을 이용한 칩 레벨의 냉각 장치이다. 작동유체는 진공으로 밀봉된 공간내에서 외부 동력 없이 모세관력에 의하여 이동한다. 본 논문에서는 실리콘보다 열전도도가 우수하여 발생되는 열을 더욱 빠르게 소산시킬 수 있는 구리 모재의 초소형 히트파이프를 제작한다. 특히, 모세관력은 히트파이프의 성능을 좌우하는 요소이다. 모세관력 향상을 위해서 구리 전기도금으로 이용하여 홈(groove)부분을 제작한다. 윅(wick) 제작, 구리판 접합, 작동유체 충전등으로 초소형 히트파이프를 제작한 후, 성능 실험한 결과를 보여준다.

  • PDF

3극형 CNT 에미터가 장착된 초소형 X선 튜브의 제작 및 결함 분석

  • Gang, Jun-Tae;Kim, Jae-U;Jeong, Jin-U;Choe, Seong-Yeol;Choe, Jeong-Yong;An, Seung-Jun;Song, Yun-Ho
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.08a
    • /
    • pp.263.1-263.1
    • /
    • 2013
  • 탄소나노튜브(CNT)를 이용한 초소형 X선 튜브는 근접 암치료, 비파괴 X선 영상 장치, 휴대용 X선 분광계 등에서 X선 발생소스로 많이 연구되고 있다. 2극형 CNT 에미터의 경우 구조가 단순하여 초소형 X선 튜브에 쉽게 장착할 수 있지만 아노드의 전압과 전류가 연동되기 때문에 튜브의 조작성이 제한적이다. 3극형은 상대적으로 복잡한 구조이고, CNT에서 방출된 전자가 게이트 전극으로 흐르는 누설 전류 그리고 절연체와 충돌하여 차징을 발생시킬 수 있기 때문에 직경이 좁은 초소형 X선 튜브에 구현하기가 쉽지 않다. 하지만 초소형 X선 튜브를 다양한 X선 장치에 응용하기 위해서는 아노드 전압과 전류의 독립된 조작이 가능한 3극형 CNT 에미터가 반드시 구현되어야 한다. 본 발표에서는 전자빔의 아노드 집속을 강화하고 절연체에서의 차징을 줄이는 포커싱 기능의 게이트(FFG) 구조를 제안하였고. 이를 적용하여 초소형 X선 튜브들을 제작하고, 분석하였다. FFG 구조가 성공적으로 적용된 초소형 X선 튜브는 게이트 누설 전류 없이 뛰어난 전류 및 X선 방출 특성을 보였다. 이와는 달리, 몇몇 초소형 X선 튜브들에서는 게이트 누설 전류가 나타났고, 아노드 전압에 의한 게이트 전압 상승이 발생하여 불안정한 구동 특성을 보였다. 초소형 X선 튜브를 밀봉하지 않고 진공 챔버에서 실험한 결과, 유도된 게이트 전압은 상당한 시간이 흐르거나 진공챔버에 공기를 주입하고 다시 진공상태로 만들면 유도전압이 제거되는 것을 볼 수 있었다. 결론적으로 CNT에서 방출된 전자빔이 정상궤도를 벗어나 게이트 누설전류와 차징에 의한 게이트 유도전압을 발생시키면 초소형 X선 튜브가 불안정한 구동을 하고, 결국 튜브의 심각한 결함으로 나타나게 된다. 즉, 게이트 누설 전류와 유도된 게이트 전압은 3극형 CNT 에미터가 장착된 초소형 X선 튜브의 디자인과 제작에 있어서 성공 기준이 될 수 있다.

  • PDF

Feasibility study of insertable miniature x-ray source for dental imaging (치과 영상용 삽입형 초소형 X선 튜브의 가능성 연구)

  • Cho, Sung-Ho;Kim, So-Yeong;An, So-Hyun;Lim, Soo-Mee;Lee, Re-Na
    • Journal of the Korean Society of Radiology
    • /
    • v.6 no.1
    • /
    • pp.39-45
    • /
    • 2012
  • Conventional periphery radiography system has a various problem such as patient dose and the pain of X-ray examination. In this paper, to solve these problems, we suggested insertional miniature x-ray system and we verified the feasibility of this system. First, we performed the Geant4 x-ray simulation to design x-ray collimator and filter to use miniature x-ray tube and we decided optimized thickness of filter and collimator. Also, we measured x-ray spectrum using CdTe detector and PX4 module to verify simulation results. Also, we acquired teeth image of fabricated phantom using conventional dental x-ray and prosed miniature x-ray system. As a results, our system has good image quality as compared to those of conventional systems. Our evaluation of the proposed system indicates that it can be potentially very useful for dental imaging.

Combustion Characteristics in a Heat-recirculating Microemitter for a Micro Thermophotovoltaic System (초소형 열광전변환 장치용 열재순환 초소형 이미터 내 연소특성에 관한 연구)

  • Lee, Kyoung-Ho;Kwon, Oh-Chae
    • Proceedings of the KSME Conference
    • /
    • 2007.05b
    • /
    • pp.2360-2365
    • /
    • 2007
  • A new microemitter (microcombustor) configuration for a micro thermophotovoltaic system in which thermal energy is directly converted into electrical energy through thermal radiation was investigated experimentally and computationally. The microemitter as a thermal heat source was designed for a few watt power-generating micro thermophotovoltaic system. In order to satisfy the primary requirements for designing the microemitter, i.e., stable burning in the small confinement and maximum heat transfer through the emitting walls but uniform distribution of temperature along the walls, the present microemitter is cylindrical with an annular-type shield for heat recirculation to apply for the excessive enthalpy concept. Results show that the heat recirculation substantially improves the performance of the microemitter: the observed and predicted thermal radiation from the microemitter walls indicated that heat generated in the microemitter is uniformly emitted.

  • PDF

The Fabrication and Characteristics of Micro Heat Pipe for IC Chip Cooling (IC 칩 냉각용 초소형 히트 파이프의 제작 및 성능 평가)

  • Park, Jin-Sung;Choi, Jang-Hyun;Cho, Hyoung-Chul;Yang, Sang-Sik;Yoo, Jae-Suk
    • Proceedings of the KIEE Conference
    • /
    • 2000.11c
    • /
    • pp.586-588
    • /
    • 2000
  • 본 논문은 전자 패키징의 방열 성능을 개선하기 위하여 초소형 히트 파이프를 제작하고 열전달 성능을 시험한 결과를 보여준다. IC 칩이 점점 고성능화되고 고집적화되어 감에 따라 발열 문제가 대두되는데, 이 열은 전도만으로는 충분히 소산시킬 수 없고 패키징 표면에 별도의 장치를 장착하는 것은 시스템 소형화의 장애 요소가 된다. 따라서, 고성능 칩 개발을 위한 선결 과제로 고성능 초소형 냉각 장치가 요구되고 있다. 히트파이프는 밀봉된 파이프 내의 2상 유동과 상변화 잠열을 이용하여 열원으로부터 히트 싱크로 열을 효과적으로 전달하는 열교환 장치이다. 본 논문에서는 전자 패키징 내에 집적화할 수 있도록 초소형 히트 파이프 어레이를 제작하여 그 성능을 시험한 결과 증발부의 온도가 $12.1^{\circ}C$ 감소됨을 보인다.

  • PDF

Development and Performance Evaluation of an Ultra-Compact CT with Auto Calibration of Detector Center Axis (검출기 중심축을 자동 보정하는 초소형 CT 개발 및 성능평가)

  • Byeong-Woo Kwak;Keun-Ho Rew
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.5
    • /
    • pp.651-662
    • /
    • 2023
  • In this study, we designed and fabricated an ultra-compact CT that automatically calibrates the detector's center axis and verified its performance. The three-dimensional reconstruction performance was evaluated using 3D CAD data and X-ray data acquired by manually calibrating the center axis of the CT detector. The results showed that tilting the center axis by more than 0.25° causes circle break phenomenon, which rapidly degrades the quality of the 3D reconstructed image. By applying the automatic calibration device of a detector center axis, the 3D reconstruction performance was enhanced by calibrating the detector center axis to match the specimen rotation axis.

Fabrication of PMMA refractive microlens array using transparent acrylic resin (아크릴 레진을 이용한 초소형 PMMA 렌즈 배열의 제작)

  • 안시홍;김용권
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2000.02a
    • /
    • pp.190-191
    • /
    • 2000
  • 미세가공 기술을 이용한 초소형 렌즈의 제작 및 연구가 매우 활발히 진행되고 있다. 초소형렌즈의 응용 분야는 바코더 스캐너, 레이저 프린터, 프로젝터, 광 기록 장치, 광섬유를 이용한 광통신 등이 있으며 앞으로도 더 많은 응용 분야를 위한 광범위한 설계와 제작 공정들이 연구되어 갈 것이다. 본 논문에서는 아크릴 레진을 이용하여 초소형 렌즈를 제작하는 공정을 개발하여 새로운 재료와 공정에 대한 가능성을 확인한다. (중략)

  • PDF