• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.637-646
• /
• 2010

A time-domain panel method based on the potential flow theory and the time-stepping method is developed to predict the steady/unsteady aerodynamic characteristics of FM07, which is the BWB (Blended-wing body) type MAV. In the aerodynamic analyses, we used two types of the initial model(Case I) and the improved model(Case II), which is moved the gravity center toward the rear and has larger aspect ratio. In the steady aerodynamic analyses, it is revealed that improved model has higher lift to drag ratio(L/D) and more stable pitch characteristic than those of the initial model. In the unsteady aerodynamic analyses for sudden acceleration motion similar to the launch phase of MAV, it seemed that there is a rapid increase of the lift coefficient after the launch and unsteady results are good agreed compare with steady results in just a few times. In the analysis for pitch oscillation motion, which is occurred at the cruise condition of the FM07, it shows that unsteady aerodynamic coefficients looped around steady results and the improved model has more sensitive aerodynamic characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.826-831
• /
• 2004

Recently, studies have been carried out to develop unmanned Micro Air Vehicles(MAVs) that can search and monitor inside buildings during urban warfare or rescue operations in hazardous environments. However, existing fixed-wing and rotary-wing MAVs cannot travel at extremely low or high speeds, hover in place, or change directions instantly. This has lead researches to search for other flight methods that could overcome those drawbacks. Insect flight principles and its applications to MAVs are being studied as an alternative flight method. To take flight, insects flap and rotate their wings. These wing motions allow for high maneuverability flight such as hovering, vertical take off and landing, and quick acceleration and deceleration. This paper proposes a method for designing a mechanism that reproduces hovering insect flight, the basis for all other forms of insect flight. The design of a mechanism that can reproduce the motion that causes maximum lift is proposed, the required specifications are calculated, and a method for reproducing hovering insect flight with a single motor is presented. Also, feasibility of the design was confirmed by simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.455-466
• /
• 2020

In this study, we built a thermal model for SNIPE 6U nano-satellite which has scientific mission for measuring science data in near Earth space environment and described thermal design based on the thermal model. And the validity of the thermal design was verified through the on-orbit thermal analysis. The thermal design was carried out mainly on the passive thermal control techniques such as surface finishes, insulators, and thermal conductors in consideration of the characteristics of the nano-satellite. However, the components with narrow operating temperature range and directly exposed to the orbital thermal environments, such as a battery and thrusters, are accomodated with heaters to satisfy the temperature requirements. On-orbit thermal analysis conditions are based on the basic orbital conditions of the satellite, and thermal analysis was performed for Normal mode, Launch & Early Orbit Phase (LEOP), Safehold mode, and Maneuver mode which are classified by the power consumption and the attitude of the satellite according to the mission scenario. The analysis results for each mode confirmed that every component satisfies the temperature requirement. In addition, the heater capacity and duty cycle of the battery and thruster were calculated through the analysis results of the Safehold mode.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.253-256
• /
• 2003

The engine core of a 65hp-turboshaft engine for UAV is developed and modified into a 55lbf-turbojet engine. Since the core engine is installed with a propelling nozzle, which has the same mass flow characteristics as the power generator of the turboshaft engine its mechanical and aerodynamic characteristics are basically the same as those of the complete engine. Engine output is not shaft power but thrust force that is easier to measure. The core engine is very useful for core test purpose. Besides, the core engine itself can be directly used for propulsion of small air vehicles.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.53-58
• /
• 2008

인공위성을 통해 취득된 데이터들은 지상국의 수신처리시스템을 거쳐 표준영상으로 생산되며, 생산된 영상으로부터 사용자에게 의미 있고, 가치 있는 정보를 이끌어 내는 판독의 단계를 수행하게 된다. 본 연구에서는 원격탐사의 전반적인 이해를 돕기 위한 교육적 모델로서 캔샛 프로그램을 도입하였다. 캔샛 프로그램은 스탠포드대 로버트 트윙 교수의 제안으로 학생들에게 한 학기의 짧은 시간에 실제 인공위성의 설계, 해석, 제작, 조립, 시험, 발사, 운용 등 전반적인 시스템의 이해를 도모하기 위한 1Kg 이하의 캔 크기의 초소형 위성을 개발하는 교육 프로그램이다. 본 연구는 한국과학영재학교 R&E 프로그램의 지원으로 시작하였으며, 실제 초소형 위성 캔샛('KSAsat'으로 명명)을 직접 설계, 제작, 조립하고 최종적으로 발사 운용 시험을 수행하였다. 주 탑재체로 일반 상용 디지털 카메라를 장착하였으며, GPS, 광센서, 3 축 가속도계, 온도센서, 압력센서를 탑재하였다. 비행시험을 통해 성공적으로 영상을 취득하고, 각종 센서로부터의 데이터를 지상국으로 전송 받았다. 지상국을 통해 처리 되어진 데이터로부터 의미 있는 정보를 추출하는 판단의 단계를 거쳐 원격탐사의 전반적인 교육을 성공적으로 수행할 수 있었다. 본 논문에서 캔샛 프로그램이 원격탐사 교육에도 충분히 활용될 수 있음을 보였다.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.45-46
• /
• 2008

There are various polluting emissions related to the air quality such as $NO_x$, $CO_2$, CO, VOCs, $O_3$, $SO_2$, $CH_4$, $H_2S$, $NH_3$, etc. We need the system that reduces emission of these environment gases and detects risk factors in modern society. Therefore, if we use the USN(Ubiquitous Sensor Network) technology and a MAV(Micro Air Vehicle) Quad Rotor which can be hovering and moving free for setting up the environment gas sensing system, the realtime measurement on environment gases is facilitated and by extension, in application of traffic watchdog, forest fire surveillance and counter-terrorism efforts, we anticipate making better use of a Quad Rotor.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.5
• /
• pp.605-611
• /
• 2011

In this study, based on previous studies, the thrust generated by using flapping tandem wings is examined. We studied on the relationship between the parameters for characterizing oscillatory tandem wings (namely, the Strouhal number and Reynolds number) for thrust generation in micro flow regime. At each Reynolds number, Strouhal number, heaving amplitude, distance between tandem wings, and phase difference are varied and the flapping motions of tandem mode are calculated to find the optimum conditions for generating thrust. As a result, comparing with a single flapping mode, we found that the minimum Strouhal number for generating thrust is shifted down up to approximately 25% when the tandem flapping mode is applied.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.53-58
• /
• 2002

A three-dimensional incompressible Navier-Stokes solver is developed for the flow analysis around Micro Air Vehicle(MAV) designed by MACDL(Micro Aerodynamic Control and Design Lab), Seoul National Univ., Validations of this solver are presented for two cases, first flow over the circular cylinder with infinite length, second flow over infinite wing with wing section, E387 airfoil. Simultaneously, Wind Tunnel test is performed with Flatform Wire type sir-component balance and model designed by MACDL. The numerical results are also examined through comparison with experimental data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.274-280
• /
• 2016

Hinge driving type holding and release mechanism based on the burn wire release for application of cubesat is main payload of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) to be launched at 2015. It has high constraint force, low shock level as well as surmounting drawbacks of conventional nichrome burn wire release method that has relatively low constraint force and system complexity for application of multi-deployable systems. In this paper, we have proposed a flight model of holding and release mechanism for the verification of the constraint force and deployment status signal acquisition. To validate the effectiveness of the flight model, launch and on-orbit environment verification test have been performed.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.47.4-47.4
• /
• 2009

초소형전기기계시스템(MEMS: Micro-Electro-Mechanical Systems) 기술로 제작된 마이크로미러 어레이를 장착한 MEMS 우주망원경은 특유의 광시야각 감시, 목표 확인, 확대 및 고속 추적 기능을 가지며 고층대기에서의 초대형 방전현상과 같이 넓은 영역에서 드물게 임의로 일어나는 섬광현상을 관측하기에 최적이다. 러시아 과학위성 Tatiana-2의 주 탑재체로 선정된 극소형 MEMS 우주망원경 MTEL(MEMS Telescope for Extreme Lightning)은 광시야각 감시와 목표 확인을 위한 트리거망원경, 목표 확대와 고속추적을 위한 확대망원경 및 섬광현상의 분광측정을 위한 분광계로 구성되어 있다. 1년간의 개발 및 성능 검증 후 MTEL은 위성탑재를 위한 모든 우주인증 시험을 성공적으로 마쳤다. 현재 MTEL은 Tatiana-2 위성에 탑재되어 있으며, 9월 18일에 우주로 발사되어 1-3년간 800km 궤도를 비행하며 지구 대기에서 발생하는 섬광현상을 관측할 예정이다. 이 발표에서는 MTEL 탑재체의 설계, 제작, 성능 측정 및 calibration 결과를 보고하고, 위성탑재를 위한 진동 및 충격, 열, 진공 및 전자기파 적합성 등의 우주인증 시험 결과 또한 보고한다. 또한 발사 후 과학위성 및 MTEL의 이 발표 때까지의 우주에서의 상황을 보고한다.