• Journal of the Korean Society of Food Science and Nutrition
• /
• v.8 no.1
• /
• pp.43-50
• /
• 1979

This experiment was designed to investigate the changes of cadmium content of different foods during cooking. 1. By addition of standard cadmium to different foods, recovery percentage was 98.3% by Dithizone Method and 97.9% by APDC. 2. At various pH levels the highest cadmium was extracted at pH 1.0. 3. Cadmium was contaminated at first to six hours of immersion and did not increased after this period. 4. About 2/3 of added cadmium was extracted by different concentrations of acetic acid.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.2
• /
• pp.93-97
• /
• 1977

A pot experiment was conducted to find out suitable method in determining the rate of phosphorus application. Soybean was planted under optimum moisture condition. The soils used in this experiment were cultivated and non-cultivated mineral soils, and volcanic ash soils. The results were summarized as follows: 1. Phosphorus adsorption maximum(PAM) was the good parameters to determine phosphorus adsorption capacity of all tested soils. 2. Phosporus adsorption maximum was increased with the content of ammonium acetate extractable aluminum, and the organic matter effects on PAM was considerably high in volcanic ash soils. 3. Requirement of phosphorus for maximum yields were in the range of 30~35% of PAM for tested soils. 4. PAM was considered as a suitable criteria to determine the rate of the phosphorus application and it was also considered to be more attractive than phosphorus absorption coefficient.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.87-95
• /
• 2003

Although extensive studies were conduced on hydrogen fermentation of organic wastewaters, little is known about biohydrogen production from organic solid wastes. The leaching-bed reactor treating food waste by heat-shocked anaerobic sludge was, therefore, operated at D of 2.1, 3.6, 4.5 and $5.5d^{-1}$ to find optimal D for hydrogen production. Successful operation of a reactor can be accomplished when it is operated at proper dilution rate (D). Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. All the reactors showed that, on day 1-3, hydrogen production was dominant and VFA concentration was higher than ethanol. Butyrate and acetate were major components of VFAs over the whole operation, though lactate was very high on day 1-2. Compared with other D values, D of $4.5d^{-1}$, resulted in higher butyrate/acetae (B/A) ratios during the fermentation. The trend of B/A ratios was similar to the hydrogen production, suggesting that butyrate formation favored hydrogen production. Ethanol increased significantly from day 4 when hydrogen Production stopped. It indicated that heat-shocked sludge was able to induce a metabolic flow from hydrogen-and acid-producing pathway to solvent-producing pathway. Operation at D of $4.5d^{-1}$ led to higher fermentation efficiency (58%) than those (51.5, 55.3 and 53.7%) at 2.1, 3.6 and $5.5d^{-1}$. The COD removed was convened to hydrogen (10.1%), VFA (30.9%), and ethanol (17.0%).

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.438-444
• /
• 2010

Fermented skate has a unique ammonia-like flavor. The flavor is preferred by a few lovers of skate muscle, while women and young people may be sensitive to the odor. Organic acids were used to reduce the ammonia-like odor in fermented skate and to investigate the physicochemical properties. Fermented skate muscles were sprayed with 20 mL of acetic acid or citric acid (3, 5, and 7%) for 30 seconds and stored at $4^{\circ}C$ for 15 days. The physicochemical properties of organic acid-treated fermented skate were investigated during storage. The control, which was treated with distilled water, showed a higher pH value than the samples treated with organic acids. The $L^*$ value increased with increasing organic acid concentration, while the $a^*$ and $b^*$ values were not significantly different among the samples. The trimethylamine (TMA) decreased with increasing in the organic acid concentration, but it was not significantly different after 9 days of storage. Ammonia-type nitrogen and ammonia-like flavoring, decreased with increasing in the organic acid concentration, whereas ammonia-type nitrogen increased with a storage period more than 6 days. In conclusion, fermented skate treated with 7% citric acid was the best treatment to reduce the ammonia-like odor.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.105-113
• /
• 2003

Successful operation of a reactor can be accomplished when it is operated at proper D depending on the state of degradation. Operation at high D leads to the washout of biomass in the reactor while operation at low D leads to product inhibition due to the accumulation of excess VFA. These appear to limit the production of hydrogen to reach a higher level. Operation by D control was performed to improve the efficiency of hydrogen fermentation of food waste. Although simple organic matters were rapidly degraded in the early stage (day 1-2), proper VFA concentration and pH values were kept in the reactor at D of $4.5d^{-1}$, which was previously reported to be optimum initial D. High butyrate/acetate (B/A) ratios over 3.2 were obtained. Without D control, the reduction of simple organic matters after day 2 caused the decrease of VFA production and the increase of pH. Hydrogen production also decreased, as microbial proliferation was less than microbial loss by washout. However, the reactor performance was dramatically improved at D control from 4.5 to $2.3d^{-1}$. It showed the highest B/A ratios over 2.0 among the reactors on day 4-7. The second hydrogen peak appeared on day 4, resulting in the highest fermentation efficiency (70.8%) among the reactors. It was caused by the enhanced degradation of slowly degradable matters. The COD removed was converted to hydrogen (19.3%), VFA (36.5%), and ethanol (15.0%). Therefore, the strategy using D control, depending on the state of degradation, was effective in improving the efficiency of hydrogen fermentation.

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.63-71
• /
• 2009

Two experiments were conducted to investigate feed value of Yukmijihwangtang (herbal medicine) meal. In experiment 1, the chemical composition of Yukmijihwangtang ingredients was determined before and after extraction, and investigated the effects of partial substitution of dried Yukmijihwangtang meal on TMR for fattening cattle. In experiment 2, nine Korean native male goats were employed to investigate the palatability and ruminal parameters of Yukmijihwangtang meal silages. In experiment 1, the crude protein content after water extraction was higher in Alisma orientale Juzepczuk (Teaksa), and lower in Pachyma hoelen Rumph (Bokryeong). the crude fat content after water extraction was higher in Cornus officinalis Sieb. et Zucc (Sansuyu), and lower in other ingredients. ADF content after water extraction of Cornus officinalis Sieb. et Zucc (Sansuyu) was higher compared to those of Pachyma hoelen Rumph (Bokryeong) and Paeonia suffruticosa Andrews (Mokdanpi). Dioscorea japonica Thunberg (Sanyak) was the lowest in ADF content. Dry matter disappearance was increased by adding Yukmijihwangtang meal to TMR. In experiment 2, feed intakes of Yukmijihwangtang silage containing molasses (0.5 and 1%) for 30 min and 6 hr were significantly higher than that of control (0%) in Korean native goats. In various ruminl parameters, molasses addition to silage materials trended to increase total VFA, propionate and valerate contents, but trended to decrease iso-butylate, butylate and iso-valerate contents in Korean native goats. In conclusion, Yukmijihwangtang meal could be used as partial substitution of low level in TMR for fattening cattle. Molasses supplementation to silage materials contained with herbal medicine meal could improve its nutritional quality and palatability for Korean native goats. One percent level of molasses addition could give a useful effect in ensiling.