• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.302-313
• /
• 2008

The purposes of this study are to investigate the concentration levels of fine particles, so called PM$_{2.5}$, to identify the affecting sources, and to estimate quantitatively the source contributions of PM$_{2.5}$. Ambient air sampling was seasonally carried out at two sites in Pohang(a residential and an industrial area) during the period of March to December 2003. PM$_{2.5}$ samples were collected by high volume air samplers with a PM$_{10}$ Inlet and an impactor for particle size segregation, and then determined by gravimetric method. The chemical species associated with PM$_{2.5}$ were analyzed by inductively coupled plasma spectrophotometery(ICP) and ion chromatography(IC). The results showed that the most significant season for PM$_{2.5}$ mass concentrations appeared to be spring, followed by winter, fall, and summer. The annual mean concentrations of PM$_{2.5}$ were 36.6 $\mu$g/m$^3$ in the industrial and 30.6 $\mu$g/m$^3$ in the residential area, respectively. The major components associated with PM$_{2.5}$ were the secondary aerosols such as nitrates and sulfates, which were respectively 4.2 and 8.6 $\mu$g/m$^3$ in the industrial area and 3.7 and 6.9 $\mu$g/m$^3$ in the residential area. The concentrations of chemical component in relation to natural emission sources such as Al, Ca, Mg, K were generally higher at both sampling sites than other sources. However, the concentrations of Fe, Mn, Cr in the industrial area were higher than those in the residential area. Based on the principal component analysis and stepwise multiple linear regression analysis for both areas, it was found that soil/road dust and secondary aerosols are the most significant factors affecting the variations of PM$_{2.5}$ in the ambient air of Pohang. The source apportionments of PM$_{2.5}$ were conducted by chemical mass balance(CMB) modeling. The contributions of PM$_{2.5}$ emission sources were estimated using the CMB8.0 receptor model, resulting that soil/road dust was the major contributor to PM$_{2.5}$, followed by secondary aerosols, vehicle emissions, marine aerosols, metallurgy industry. Finally, the application and its limitations of chemical mass balance modeling for PM$_{2.5}$ was discussed.

• Journal of Life Science
• /
• v.30 no.2
• /
• pp.191-201
• /
• 2020

As society develops rapidly, environmental pollution is becoming a greater risk factor threatening human health. One of the major causes of air pollution that affects human health is particulate matter (PM), which contains a heterogeneous mixture of different particle sizes and chemical compositions. PM is classified by size into general PM (PM₁₀; diameter below 10 ㎛) and fine PM (PM_2.5; diameter below 2.5 ㎛). PM_2.5 can pass through the respiratory tract into the circulatory system and thence throughout the body. PM_2.5 is known to stimulate oxidative stress and inflammatory responses to cells, promoting diseases such as asthma, chronic respiratory disease, cardiovascular disease, diabetes mellitus, and immunological disorders. Although detailed molecular mechanisms for how PM stimulates disease progression still need to be elucidated, together with national efforts to reduce PM production, significant research has been conducted that demonstrates the harmfulness of PM in disease progression through in vitro and in vivo experiments. This review focuses on the harmfulness of PM in disease progression; we also introduce a biological verification method for determining the hazards of PM.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.6
• /
• pp.37-48
• /
• 2021

Roadside pollution has been identified as the main cause of PM_2.5 in urban areas. Green infrastructure has been understood to mitigate air pollution from roadside traffic effectively, but complication depend on environmental variables. This study aimed to investigate the characteristic of PM_2.5 by the type of space in an urban park located in Songsanghyeon Plaza, surrounded by a 12-lane road on all sides. Type of space was typically classified as roadside square (A), sunken square (B), a mix of trees and hedges/shrubs (C), trees only (D), and grass square (E) according to the land-use type and layers of trees. PM_2.5 was measured for nine days, three days for three different Air Quality Forecasts-Good level (0~15㎍/m³), Moderate level (16~35㎍/m³), and Unhealthy level (36~75㎍/m³). The analysis result was as follows. At good levels, there was statistical significance in the order of D, E < B, C < A. In the case of moderate levels and unhealthy levels, D and E were statistically lower than other land-use types. The characteristic of PM_2.5 in the urban park by type of space was affected by atmospheric flow into the road. The relatively high concentration of A and C was located near the roads. Although B was far away from the road, the reason for the high concentration of PM_2.5 was that no structures blocked the air pollution. Thanks to the type of space C, filtering the air pollution from the roads, the concentration of PM_2.5 in D and E was relatively low.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.7
• /
• pp.391-402
• /
• 2017

Particulate matter becomes an important issue in the environmental society recently so that it is necessary to evaluate that the commercial application of baghouse systems for effective control of fine particulates is viable. A laboratory-scale baghouse experimental apparatus with filter bags made of PTFE felt or PTFE felt coated with PTFE membrane is used to investigate the filtration performances of fine particulates. Experiments by changing filtration velocity, inlet dust concentration, and average dust particle size show that the dust collection efficiency becomes higher at lower filtration velocity, higher inlet dust concentration and larger average dust particle size. The total pressure drop through the filter media and dust layer becomes higher at higher filtration velocity and higher inlet dust concentration. The dust collection efficiency is higher and the pressure drop is lower at a baghouse with filter bags coated with PTFE membrane than that without membrane coating. From the result that the dust collection efficiency of $PM_{2.5}$ in a reasonable filtration velocity range during off-line pulsing at a baghouse with PTFE felt bag filters coated with PTFE membrane is as high as 99.99%, it is confirmed that the use of baghouse is an effective measure to control the fine particulates.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.4
• /
• pp.179-185
• /
• 2018

Particulate Matter (PM2.5) has various adverse effects on health. Climate and industry activity and traffic volume are the main causes, especially in urban area. In order to construct an effective forecasting system, many measurement systems are required, but it is impossible in reality. Therefore, in this study, we propose a method to infer PM2.5 condition by using rule induction technique. The experimental results showed a classification accuracy of 71%.

• Journal of Environmental Health Sciences
• /
• v.40 no.5
• /
• pp.346-354
• /
• 2014

Objectives: Although a number of epidemiologic studies have examined the association between air pollution and mortality, data limitations have resulted in fewer studies of particulate matter with an aerodynamic diameter of ${\leq}2.5{\mu}m$ ($PM_{2.5}$). We conducted a time-series study of the acute effects of particulate matter with an aerodynamic diameter of ${\leq}10{\mu}m$($PM_{10}$) and $PM_{2.5}$ on the increased risk of death for all causes and cardiovascular mortality in Seoul, Korea from 2006 to 2010. Methods: We applied the generalized additive model (GAM) with penalized splines, adjusting for time, day of week, holiday, temperature, and relative humidity in order to investigate the association between risk of mortality and particulate matter. Results: We found that $PM_{10}$ and $PM_{2.5}$ were associated with an increased risk of mortality for all causes and of cardiovascular mortality in Seoul. A $10{\mu}g/m^3$ increase in the concentration of $PM_{10}$ corresponded to 0.44% (95% Confidence Interval [CI]: 0.25-0.63%), and 0.95% (95% CI: 0.16-1.73%) increase of all causes and of cardiovascular mortality. A $10{\mu}g/m^3$ increase in the concentration of $PM_{2.5}$ corresponded to 0.76% (95% CI: 0.40-1.12%), and 1.63% (95% CI: 0.89-2.37%) increase of all causes and cardiovascular mortality. Conclusion: We conclude that $PM_{10}$ and $PM_{2.5}$ have an adverse effect on population health and that this strengthens the rationale for further limiting levels of $PM_{10}$ and $PM_{2.5}$ in Seoul.

• Journal of the Korean Society of Safety
• /
• v.32 no.1
• /
• pp.21-26
• /
• 2017

An IoT-based particulate matter (PM2.5) sensing device (PSD) is developed. The PSD consists of a PM2.5 sensor, signal processing circuit, and wi-fi enabled-microprocessor along with temperature and humidity sensors. The PSD estimates PM2.5 density by measuring light scattered by PM2.5. To gauge performance of the PSD, PM2.5 density of open air was measured with the PSD and compared with that of the collocated-government-certified measuring station. Measurements were taken at a sampling frequency of 100 Hz and moving-averaged to remove measurement noise. When compared to the result of the measuring station, average percentile error of PM2.5 density from the PSD is found to be 31%. A correlation coefficient is found to be 0.72 which indicates a strong correlation. Instantaneous variation, however, may far exceed average errors, leading to a conclusion that the PSD is more suitable for estimating average trend of PM2.5 density variations than estimating instantaneous PM2.5 density.

• Land and Housing Review
• /
• v.12 no.3
• /
• pp.39-50
• /
• 2021

This research aims to provide guidelines with the appropriate type of smart bus stop to reduce the concentration of fine dust. To this end, we divided smart bus stops into two types: closed and open bus stops. The estimated reduction effect was compared and analysed by measuring the estimated PM₁₀ and the estimated PM_2.5 at five locations inside and outside a smart bus stop located in Gangnam gu, Seoul. The effect of reducing the amount of the fine dust concentration in external space was insignificant for both types of bus stops. The different effect of reducing the concentration of the amount between in internal space was relatively significant: the fine dust concentration was 26.0 ㎍/m³ for PM₁₀ and 20.2 ㎍/m³ for PM_2.5 at open-type bus stops; whilst was 2.4 ㎍/m³ for PM₁₀ and 1.8 ㎍/m³ for PM_2.5 at closed type bus stops. Based on the findings, a closed type bus stop is recommended when considering the cost of reducing fine dust. In addition, due to the ineffectiveness of reducing the amount of fine dust from the outside of the bus stop, additional provision of smart bus stops is required particularly in locations where demand exceeds the capacity of the inside. A clear definition of smart bus stop and it's minimum standard should also be considered.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.358-363
• /
• 2018

The purpose of this study is to show the possibility of using Cu catalyst in removal of $NO_x$ from automobile exhaust which is regarded as the primary source of fine dust PM2.5. The energy and the bond lengths of the three possible structures of Cu-NO complex, which is formed by binding NO molecule to Cu, and the changes in IR and Raman spectra are calculated using MPW1PW91 method on the level of 6-311(+)G(d,p) of basis sets with Gaussian 09 program. As a result, the enthalpy of formation of the Cu-NO complexes are obtained as ${\Delta}H=104.89$, 91.98, -127.48 kJ/mol for the linear, bent, and bridging forms of them, respectively. And the bond lengths between N and O in NO complexes, which becomes longer than NO molecule, indicates that O is easily reduced from Cu-NO. In addition, the Cu-NO complexes using Cu catalyst can be easily measured by infrared or Raman spectroscopy because in the IR and Raman spectra of the NO and Cu-NO complexes the positon and the intensity of bands are definitely different in each vibration mode.

• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.465-474
• /
• 2021

This research investigated the characteristics of fine particle concentration and ionic elements of PM_2.5 during sea breeze occurrences during summertime in Busan. The PM₁₀ and PM_2.5 concentrations of summertime sea breeze occurrence days in Busan were 46.5 ㎍/m³ and 34.9 ㎍/m³, respectively. The PM₁₀ and PM_2.5 concentrations of summertime non-sea breeze occurrence days in Busan were 25.3 ㎍/m³ and 14.3 ㎍/m³, respectively. The PM_2.5/PM₁₀ ratios of sea breeze occurrence days and non-sea breeze occurrence days were 0.74 and 0.55, respectively. The SO₄^2-, NH₄⁺, and NO₃^- concentrations in PM_2.5 of sea breeze occurrence days were 9.20 ㎍/m³, 4.26 ㎍/m³, and 3.18 ㎍/m³ respectively. The sulfur oxidation ratio (SOR) and nitrogen oxidation ratio (NOR) of sea breeze occurrence days were 0.33 and 0.05, respectively. These results indicated that understanding the fine particle concentration and ionic elements of PM_2.5 during sea breeze summertime conditions can provide insights useful for establishing a control strategy of urban air quality.