• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.45-53
• /
• 2001

레진 수복에서 초기에 저광도로 중합하여 레진의 유동성을 허용함으로써 중합시 내부응력을 상쇄하며, 다시 고광도로 중합하여 레진의 물성도 유지할 수 있는 방법이 시도되고 있어 초기 저광도 중합이 상아질과의 결합 강도와 레진의 미세경도에 미치는 영향을 알아보고자 하였다. 소의 건전한 하악 전치 20개를 3개의 절편으로 절단하여 각 군에 배분하고 상아질면에 레진을 충전한 후, I군은 $450mW/cm^2$의 광도도 40초간, II군은 $300mW/cm^2$와 $600mW/cm^2$의 광도로 각각 20초씩 III군은 $250mW/cm^2$와 $450mW/cm^2$에서 각각 20초씩 광중합하여 전단 결합 강도를 측정하였고, 직경 5.0mm깊이 2.0mm레진 시편을 제작하여 상, 하면 중앙에서 Vickers 미세 경도를 측정하였다. 전단결합 강도는 초기 저광도 중합군의 평균이 다소 높았으나 각 군간 통계학적 유의한 차이는 없었으며, 미세 경도는 상하면 모두에서 각 군간 통계학적으로 유의한 차이는 보이지 않았다.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.85-90
• /
• 2000

For more esthetic treatments the use of composite in molar areas are increasing. But polymerzation shrinkage that cause marginal leakage and cuspal deflection has been the problems of composites. The purpose of this study is to compare the effect of low intensity curing and polishing period on marginal leakage. Cavities were prepared on the buccal or lingual surface of forty five sound extracted human teeth and etching, application of bonding agent and filling of composite was done. Group 1 was light cured at intensity of 600$mW/cm^2$ for 41 seconds and polished. Group 2 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and polished and after polishing it was light cured for 40 seconds at 600$mW/cm^2$. Group 3 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and waited for 5 minutes and after curing at 600$mW/cm^2$ for 40 seconds polishing was done. The specimens were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles and immersed in 2% methylene blue solution for 24 hours. Composite-tooth interface was examined under stereobinocular microscope for dye penetration. The results were as follows : 1. Group which were cured at low intensity and polished after curing at high intensity showed less marginal leakage than group which were cured at high intensity for 41 seconds(p<0.05). 2. Marginal leakage between group which were cured at low intensity and polished immediately and group which were cured at high intensity for 41 second were not significantly different. Light curing at low intensity can reduce marginal leakage but polishing immediately after curing at low intensity for short time can affect marginal leakage.