• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.117-122
• /
• 2008

Quality control of the concrete pavement in the early stage of curing is very important because it has a conclusive effect on its life span. Therefore, examining and analyzing the initial behavior of concrete pavement must precede an alternative to control its initial behavior. There are largely two influential factors for the initial behavior of concrete pavement. One is the drying shrinkage, and the other is the heat generated by hydration and thermal change inside the pavement depending on the change in the atmospheric temperature. Thus, the coefficient of thermal expansion and drying shrinkage can be regarded as very important influential factors for the initial behavior of the concrete. It has been a general practice up until now to measure the coefficient of thermal expansion from completely cured concrete. This practice has an inherent limitation in that it does not give us the coefficient of thermal expansion at the initial stage of curing. Additionally, it has been difficult to obtain the measurement of drying shrinkage due to the time constraint. This research examined and analyzed the early drying shrinkage of the concrete and measurements of the thermal expansion coefficients to formulate a plan to control its initial behavior. Additionally, data values for the variables of influence were collected to develop a prediction model for the initial behavior of the concrete pavement and the verification of the proposed model. In this research, thermal expansion coefficients of the concrete in the initial stage of curing ranged between $8.9{\sim}10.8{\times}10^{-6}/^{\circ}C$ Furthermore, the effects of the size and depth of the concrete on the drying shrinkage were analyzed and confirmed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.3
• /
• pp.506-513
• /
• 1992

본 연구에서는 복합재 구조물에 대하여 유한요소해석법에 현상학적 모델인 전 단지연해석을 도입하여 강성저하와 모재파손을 예측하고 변형률을 매개변수로 한 Wei- bull 함수를 섬유파손해석에 도입하여 초기파손후의 거동을 묘사하고자 한다. 그리 고 면내전단하중이 작용하는 경우에 대해 전단지연해석을 수행할 수 있도록 모델링을 확장했다. 모재균열의 존재로 인한 단층의 강성변화는 실험으로 측정이 불가능하므 로 유한요소해석을 수행하여 비교하였다. 이 모델로부터 전단강성의 저하를 평가하 는 방법을 사용하였으며, 모재파손의 밀도 예측도 평균변형률 개념으로 전단효과를 고 려할 수 있도록 수정하였다. 그리고 초기파손후의 거동을 점진적으로 해석하기 위해 비선형 유한요소프그램을 작성하고, 상기의 모델을 도입하여 초기파손후의 거동을 보 다 정확히 묘사할 수 있는 방법을 제시하고 예로서 평시편에 대해 해석하고 실험치 및 타방법의 결과와 비교하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.741-744
• /
• 2008

Quality control of early age concrete significantly influences the long term performance. Primary factors for early age concrete quality control should include the relative humidity and temperature variation, and these are more important as structures become massive and huge. Temperature raise due to cement hydration causes stress, which can develop to cracking with internal and/or external restraints. Exposure conditions including ambient temperature, humidity and wind also significantly affect the cracking behavior of early age concrete. Among many of studies on the early age concrete behavior, investigation on the variation of temperature and relative humidity internal of concrete is not common. That is in part because the difficulties in measuring the relative humidity and temperature inside the concrete. This study used a digital sensor with an appropriate logger to measure internal temperature and relative humidity. This direct measuring method is expected to provide more reliable and comprehensive data acquisition on the early age behavior of concrete.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.379-387
• /
• 2002

This paper presents an analytical model on nonlinear hysteretic behavior of hybrid steel beam with reinforced concrete ends. The modeling method and appropriate coefficients with IDARC2D were proposed from the comparison with previous test results. Since the polygonal model of IDARC2D nay overestimate, new analytical model with the initial stiffness reduction coefficient was proposed. The hysteretic coefficients for the analysis of the hybrid steel beam with reinforced concrete ends were also presented. The analytical results were compared with previous experiments. The initial stiffness and the strength were predicted with less than 5% error and 10% error, respectively.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.340-343
• /
• 2007

The temperature variation of concrete pavement at early-age significantly affects the initiation and movement of joint cracks. For this analysis, we have built on IIA(Incheon International Airport) concrete pavement construction zone, and we measured the temperature and movement of the concrete slabs by using thermocouples, moisture sensors, V/W strain gages, and Demac discs. The analysis results showed that pavement's temperature significantly affected the joint movement. The widths of the joint cracks increased at evening and early in the morning when the temperature dropped but, those decreased in the day time when the temperature rose because of the effect of thermal expansion of the concrete slabs. The movements of the joints where the cracks never developed showed opposite trend to the cracked joints.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.49-49
• /
• 2018

라오스의 Houay Pano 유역은 상업적 조림으로 인해 2011년부터 2013년까지 급속한 토지이용 변화를 겪어왔다. 본 연구는 이러한 토지이용변화가 박테리아 거동에 어떠한 영향을 주는지 이해하기 위해 Soil and Water Assessment Tool (SWAT) 모형을 활용한 박테리아 거동 모델링을 수행하였다. SWAT 모형은 수치 표고 모델, 토양 특성, 토지 이용 등의 정보를 종합하여, 유역 내수량 및 수질의 변화를 모의할 수 있는 모형으로, 본 연구는 대표적인 분원성 지표 세균 (Fecal Indicator Bacteria)인 대장균 (Escheichia coli, E. coli)을 대상으로 모델링을 수행하였다. SWAT 모형은 지표면 위 박테리아를 1)식물 위, 2)토양 용액상, 3)토양 입자상으로 구분하여 모의한다. 각 상태로 분할된 박테리아는 소멸 (die-off), 씻김 (wash-off), 침투, 표면 유출을 통한 수계로의 이동 등의 단계를 통하여 유역 내에서 거동한다. 본 연구는 서로 다른 기후의 영향을 배제하기 위해 각 토지이용 시나리오를 (2011, 2012, 2013) 실제 기후 조건과 동일 기후(2011-2013 평균) 조건으로 분류하여 분석하였다. 실제 기후 조건에서 SWAT 모형은 표면 유출, 토사 유출, E. coli 거동에 대해 2011년부터 2012년까지 감소, 2012년부터 2013년까지 증가로 모두 동일한 양상을 모의하였다. 이는 강수량의 양상과 동일한 것으로, 강수량이 표면 유출의 양을 결정하고, 달라진 표면 유출에 따라 토사 유출과 E. coli 거동이 결정되기 때문이다. 하지만 동일 기후 조건에서는, E. coli 거동 동인인 표면 유출과 토사 유출이 비교적 일정해짐에 따라, 각 상태로 분할된 박테리아의 초기 부하량값이 E. coli 거동을 결정하는 주된 요인임을 확인 할 수 있었다. 따라서 초기 부하량 분할에 활용되는 엽면적 지수 (Leaf Area Index)와 분배계수 (BACTKDDB)의 정확도가 요구된다. 추가적으로 본 연구는 박테리아의 유입원인 비료 모델링과, LAI를 활용한 박테리아 초기 부하량 산정, 토양 특성 변수와 토지 이용 변수의 분리, 지하수를 통한 박테리아 거동 등을 중심으로 SWAT 모형의 한계점과 개선점을 제시하였으며, 본 연구 결과는 토지이용변화가 박테리아 거동에 주는 영향을 모형적으로 이해하고, 또한 추후 박테리아 모델링 개발에 도움을 줄 것으로 예상된다.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.47-59
• /
• 2004

The temperature variation of concrete pavement at early-age significantly affects the initiation and propagation of its early-age cracks. This implies that the measurement and analysis of early age temperature trend are necessary to examine the causes of early age cracks in the concrete pavement. In this study, it is investigated how the early age temperature trend in concrete pavement affects the random crack initiation and behaviors of saw-cut joints using the actual construction site which is located at the KHC test road. During 72 hours after placing the concrete pavement, the ambient air temperature and temperatures at the top, middle, and bottom in concrete pavement were measured and the random crack initiation in concrete slabs and early age behaviors in the joints were surveyed. The investigation results indicate that the first random crack was initiated at one of the slabs placed in the early morning which have higher temperature changes during early 72 hours. The movement of slab was influenced by the early-age crack in the joint. It suggested that the different occurrence time of the cracks in the joint had an influence on the behavior of the cracks. Besides, the slab constructed In the morning had higher possibility of crack initiation than that in the afternoon. The rarely occurred cracks had bigger gap than other cracks.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.3
• /
• pp.77-83
• /
• 2011

Laminated composite plates have shown their superiority over metals in applications requiring high specific strength, high specific modulus, and so on. Therefore, they have used in various industry. However, they have poor resistance to impact compared to typical metal materials. To resolve this problem by many researchers for a variety of studies have been attempted. This study investigates characteristic of impact behavior of laminated composite plates due to initial stress. Using finite element program which involved the indentation law, we investigate characteristic of impact behavior of laminated composite plates due to initial stress.

• Composites Research
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2009

In this paper low-velocity impact response and damage of composite laminates is analytically investigated. A modified displacement field of plate considering initially loaded in-plane strain is proposed. From the displacement field a finite element equation on structural behavior of composite laminate is newly induced and a computational program is coded. Numerical results using the FEM code is compared with the numerical ones from reference. Additional numerical analysis is performed on another impact condition and effect of initial in-plane load is reviewed. Potential delamination damage area in the first inter-ply surface from bottom of laminate is approximated and effect of initial in-plane load and impact condition is also reviewed.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.3
• /
• pp.31-36
• /
• 2006

In this study, stress relaxation behaviors of nonwoven geotextile and geomembrane which have protection, filtration and drainage, water barrier functions, respectively were examined. 'Theory of transition phenomen' was applied to interpretate the stress relaxation behaviors of two geosynthetics. The initial and later relaxation times for stress relaxation behaviors of geosynthetics were derived from the constitutive equations. The initial relaxation behaviors of these geosynthetics were dependent on the additional strains and were especially faster with temperature. Finally, both relaxation times of geosynthetics were shorter with additional strain and temperature and the reduction of relaxation times of nonwoven geotextile were larger than those of geomembrane.