• Journal of the Korean GEO-environmental Society
• /
• v.11 no.8
• /
• pp.41-47
• /
• 2010

This study was conducted to assess the applicability of pilot scale system and to evaluate the treatment efficiency on operational parameters such as humic acid concentration, initial pH and air flow rate on the ozone/peroxyl radical reaction system. The decolorization of ozone/peroxyl radical system was higher than that of only process. Removal efficiency of ozone/peroxyl radical system was generally increased with the increase of intial concentration of humic acid but decreased over the range of 30mg/L. Treatment efficiency of HA at acid pH was smaller compared to that of neutral or basic pH and increased with increasing the air flow rate from 1L/min to 3L/min. In pilot-scale test, average removal of TOC and $COD_{Cr}$ was about 70% and 60%, respectively and ozone/peroxyl radical reaction system was indicated a potential in water treatment application.

• Tunnel and Underground Space
• /
• v.17 no.1 s.66
• /
• pp.26-31
• /
• 2007

The 11 nuclear power plants have been taking charge of more than 40% of the total electrical power development in Korea. In addition to the existing nuclear power plants at Gori, Wolsung, Youngkwang, etc., the 12 nuclear power plants are expected to be newly established until 2006. So, the 23 nuclear power plants will produce the electric power as much as more than 50% of the national gross production. However the nuclear power plants are inevitably generating the detrimental atomic wastes. Therefore the disposal techniques for the nuclear wastes should be ensured considering a very high safety factor. According to the basic researches in KAERI, the underground disposal repositories are reported to be most favorable for Korea. The KBS-3 disposal system has been strongly suggested by KAERI and this system has a deep tunnel with several disposal boreholes in tunnel floor. The nuclear wastes, which are sealed tightly in a canister, will be disposed in these boreholes. Considering the disposal tunnel in a great depth, the in-situ stress regimes will affect severely the tunnel stability. Consequently the effect of the in-situ stresses on the disposal tunnel and the role of the in-situ stresses in tunnel stability analysis are examined by the numerical studies.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.51-51
• /
• 2010

본 연구에서는 태풍 초기화된 수치모델과 AWS (Automatic Weather System) data를 이용하여 제주도를 통과하는 태풍들의 바람 강도 특성을 분석하였다. 태풍이 내습했을 때 제주도 전 지역에서 동시 관측을 하기에는 불가능하다. 따라서 중규모 수치 모델인 Advanced Research WRF v3.0.1을 사용하여 분석하였으며 더욱 정확한 태풍 모의를 위해 Kwon and Cheong (2009)에 의해 개발된 정교한 태풍 초기화 기법을 적용하였다. 태풍 초기화된 자료에 의해 모의된 결과는 The Regional Specialized Meteorological Center (RSMC) Tokyo의 예보 오차와 비교했을 때 더 향상된 결과를 보였으므로 태풍 초기화 기법의 사용은 본 연구에서 하고자하는 태풍들의 바람 강도 분석에 타당하다고 판단하였다. 그리고 모의된 결과는 그에 상응하는 AWS data와의 joint distribution (Moskaitis, 2008) 분석을 통해 비교되었다. 태풍 경로에 따른 제주도 지역의강 풍을 고려하기 위해 각각 제주도의 오른쪽과 왼쪽을 지나가는 2003년 6호 태풍 'SOUDELOR'와 2004년 7호 태풍 'MINDULLE'를 선정하였다. 또한, 모의 결과로부터 제주도 지역에 태풍이 내습했을 때 강풍의 상대적인 크기의 비교를 위해 모의된 태풍의 최대 풍속을 수치 모의로 얻은 10m 바람장의 모든 격자점에 나누어 정규화 하였다. 이를 시간에 대해 평균하여 태풍이 제주도 지역을 통과하는 전체시간에 대한 상대적인 강도 특성을 분석하였다. 수치 모의 결과와 관측 자료와의 joint distribution 분석 결과, 바람의 크기와 경향이 비교적 잘 일치하였다. 강한 풍속과 약한 풍속이 나타나는 지역은 제주도 지역의 주풍향과 지형의 영향에 크게 좌우되었다. 정규화된 바람은 산악의 정상에서 강풍이 관측되고 주 풍향에 대해 풍상측과 풍하측에서 비교적 낮은 풍속이 관측되는 결과를 보였다. 이는 Hoinka (1985)의 산악 위에서의 바람의 특성에 관한 연구에서 얻어진 결과와 유사하다. 서로 다른 경로로 통과하는 두 태풍의 모의 결과에서 제주도의 북서쪽 지역과 남동쪽 지역에서 상대적으로 약한 풍속이 관측되었다. 따라서 해당지역에서는 태풍에 동반되는 강풍의 피해를 적게 입을 것이라는 것을 알 수 있었다.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.101-110
• /
• 2007

Joint Spacing of Jointed Concrete Pavement has been uniformly designed and constructed as six-meter in Korea. However, engineering backgrounds to show the appropriateness of six-meter Joint Spacing has not been provided. In the on-going reseach of the development of Korea Pavement Reseach Program(KPRP), the optimum Joint Spacing is suggested as 6 to 8 meters according to the regional climatic conditions based on the mechanical-empirical analysis of short-term and long-term pavement distress. This study is a part of the investigation on the adequateness of Joint Spacing design specification suggested in KPRP. Joint Spacing was design and constructed as seven-meter Joint Spacing suggested as design specification in Korea Reseach Program(KPRP) and monitored the Load Transfer Efficiency(LTE), Random crack and compared with those of adjacent $6{\sim}7$ meter Joint Spacing concrete section.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.377-385
• /
• 2015

The span-lengthening of PSC I girder has increased the risk of lateral instability of the girder with the increases in the aspect ratio and self-weight of the girder. Recently, collapses of PSC I girder during construction raise the necessity of evaluating the lateral instability of the girder. Thus, the present study evaluated the lateral behavior and instability of PSC I girders under wind load, regarded as one of the main causes of the roll-over collapse during construction. Lateral instability of the girder is mainly dependent on the length of the girder and the stiffness of the support. The analysis results of this study showed the decrease in the critical wind load and the increase in the critical deformation and angle of the girder, leading to the lateral instability of the girder. Finally, this study proposed analytical equations that can predict the critical amount of wind load and lateral deformation of the girder, which would provide quantitative management values to maintain lateral stability of PSC I girder during construction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.3
• /
• pp.31-39
• /
• 1999

In this paper, numerical experiment is attempted to analyze and compare the combustion efficiency of the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Preconditioned Wavier-Stokes equation system with low Reynolds number $\kappa$-$\varepsilon$ model for turbulence closure, is LU-SGS time-integrated. Spray processes are modeled by DSF analysis with experimentally determined injection characteristics. n-heptane/air global reaction model approximates the combustion for simplicity, and the influence of turbulence on the chemical reaction is included using eddy dissipation model. The results showed the FOF triplet injector of highest combustion efficiency, whereas the OFO type of poet performance. It was also observed that the droplet mean diameter and the average gas temperature due to the mixing efficiency, are the representative parameters for the performance design of combustion.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.535-541
• /
• 2006

This paper proposes a robust method to find corresponding points for un-calibrated stereo images by using a classical method based on the epipolar constraints and motion flows. If we detect matching for the only epipolar geometry, the problem is very high. Therefore, in order to nod an initial set of matches, we use the correlation technique and then exploit motion vectors to remove mismatches among matching candidates. Then, the epipolar geometry can be accurately estimated using a veil adapted criterion and computed the fundamental matrix. The proposed algorithm has been widely tested and works remarkably well in various scenes, evenly, with many repetitive patterns. The results show that the proposed algorithm is better than the conventional.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.876-888
• /
• 1986

The Study is concerned with the analysis of unconstrained axisymmetric piercing as a nonsteady forging process by the rigid-plastic finite element method. In the numerical analysis of axisymmetric piercing, the initial velocity field is generated by assuming the material as a linear viscous material to begin with in order to facilitate the input handling and to ensure better convergencey. The strain-hardening effect for nonsteady deformation and the friction of the die-material interial interface are considered in the formulation. Rigid body treatment is also incorporated in the developed program. The experiments are carried out for aluminum alloy specimens (A1204) with different specimen heights. It is shown that the experimental results are in excellent agreement with the finite element simulations is deformed configuration. For load prediction the theoretical prediction shows excellent agreement with th eexperimental laod in the initial stage of loading before fracture of the specimen is not initiated. Distribution of stresses, strains and strain rates has been found for the given cases in computation. On this basis several fracture criteria are introduced in order to check the fracture initiation. It is found that maximum shear criterion is capable of good fracture prediciton.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.229-232
• /
• 2003

A waste container, one of the key compartments in a multi-barrier system for a potential high level radioactive waste (HLW) repository in Korea ensures the mechanical stability against the lithostatic pressure of a deep geologic strata and the swelling pressure of the bentonite buffer. Also, it prohibits potential release of radionuclides for a certain period of time. before it is corroded by impurities. Even though the materials of a waste container is carefully chosen and all manufacturing processes are under heavy quality assurance, there might be a slight chance of intial defects in a waste container. Also, during the deposition of a waste container in a repository, there might be a chance of an incident affecting the integrity of a waste container. In this study, the FEP's and the scenarios over radiological impact of a potential initial waste container defect was developed. Then the total system performance assessment on this initial waste container failure (ICF) scenario was carried out by the MASCOT-K, one of the probabilistic safety assessment tools KAERI has developed. Results show that for the data set studied in this paper, the annual individual dose by the ICF scenario well meets the KINS regulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.181-189
• /
• 2015

As a study on entrepreneurship and venture companies to support, this research is to find how to inflow the fund which is provided by private companies. This is to propose a shared platform for Information for connecting producers and consumers, corporate investors to help fund inflows to private companies and utilization of the enterprise information collected by government. Entrepreneurship support policies, as one of economy activation have a limit in the size of the support of the government therefore support continued growth through aggressive inflow of private funds is needed. It is significant to provide the environment that private funds could spill into the environment to provide for excellent start-up companies.