• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.43-53
• /
• 2015

This study analyzes economic feasibility of the LED lighting system compare to the halogen. To evaluate economic feasibility of the LED devices, we analyzed the size of theater, current value of the lighting devices in kinds, annual cost and annual cost according to the surface in case of designing stage lighting system with LED using WEELS 2011. Also, to compare energy consumption, we analyzed consumption and amount of electric energy by the surface and the amount of CO2 emission. Data showed that annual cost of the LED devices are highly inexpensive than halogen and now the value is of great. However initial cost of the equipment 200% higher than halogen. Though LED devices are expensive in startup setting, the value of utilization factor is large and depreciation years of LED(30years) are longer than halogen(2years). Therefore, annual cost of LED can make up the minus. Consider the tendency of reducing price of LED devices, we can assume that annual cost of the LED will be lower than halogen devices. Further, in 3years the expense of LED and halogen is reversed.

• School Mathematics
• /
• v.5 no.4
• /
• pp.507-520
• /
• 2003

본 연구는 실질적인 의미에서 학생들로 하여금 수학을 더 잘 이해할 수 있도록 돕기 위해 테크놀로지를 학교 교실에서 직접 활용하는 방안에 대한 연구이다. 특히 여기서는 수학을 가르치고 배우는 과정에서 가상학습체계가 주요한 도구로서 적용되었다. 내용은 무게중심을 택했고 12명의 중학생을 대상으로 현직교사가 직접 지도하였다. 학생들은 수업초기에 교사에 의해 소개되는 학생중심 학습활동에 강한 관심과 호기심을 보였고 집중력이 아주 강했다. 전통적인 수업방식과는 달리 학생들이 참여하였고 테크놀로지를 이용하여 전통적인 방식의 교실에서 할 수 없었던 수업의 시작은 학생들의 호기심을 자극하는데 충분하였다. 전반적으로 테크놀로지 환경에서의 수업을 선호하였지만 아직 전통적인 방식인 칠판과 분필을 이용한 수업을 선호한 학생들도 있었다. 새로운 변화도 좋지만 새로운 환경에 친화적이지 않거나 테크놀로지를 이용한 수업의 빠른 진행이 학생을 오히려 혼란하게 만들기도 하였다. 마지막으로 교사는 가상학습체계를 교실에서 활용함에 있어서 현 교육과정과 교과서를 크게 개혁하지 않아도 잘 준비되고 계획된 테크놀로지의 활용에 대한 잠재력을 확인할 수 있었다. 우리는 현재 테크놀로지의 보급에 비해 그 활용도가 낮다는 것을 잘 알고 있고 기타 입학시험이라는 현실이 교육과정과 학습방법의 개혁을 현실적으로 추진하는 것이 어려운 일임을 잘 알고 있다. 그래서 현 상황에서 테크놀로지의 사용을 가능하게 할 수 있는 방법을 모색하였다. 이미 보급된 테크놀로지와 교사와 학생의 테크놀로지에 대한 이해가 앞으로 그 잠재력을 갖고 있다고 확인하였다.보다 낮은 일반세균수 값을 보여주었다. 봄철 시료에 있어서 소규모 도계장은 본 냉각 후 도계과정을 제외하곤 모든 도계공정 단계에서 대규모 도계장보다 높은 일반 세균수의 측정값을 보여주었다. 봄철 시료의 냉각말기의 냉각수 일반세균수는 소규모 도계장이 대규모 도계장보다 높은 측정값을 보여주었다.주었다.다.㏖/s/$m^2$에서는 이앙후 각각 18일로 두 품종 모두 늦어, 약광은 유묘기에 분화되었던 분얼아를 휴면으로 유도할 수 있음을 시사하였다. 4. 유효경비율은 1220~220 $\mu$㏖/s/$m^2$에서 다산벼는 47~55%, 화성벼는 100~72%로 다산벼가 화성벼보다 낮았다. 이것은 다산벼는 무효분얼이 많다는 것을 시사하는 것으로 품종 육성시 유효경비율을 높여야 할 것이다.타났고, \circled2 회복상태에서, 10 lu$\chi$인 경우 서간에 1.26 $\mu\textrm{V}$, 야간에 1.59 $\mu\textrm{V}$였고, 100 lu$\chi$인 경우 서간에 2.63 $\mu\textrm{V}$ 야간에 3.65 $\mu\textrm{V}$였으며, 400 lu$\chi$인 경우 서간에 2.52 $\mu\textrm{V}$, 야간에 3.67 $\mu\textrm{V}$로 나타났다.히, 흉선, F냥, 비장 등의 림프구에 초기 세포용해성 감염을 일으키는데, B

• Food Science and Preservation
• /
• v.18 no.5
• /
• pp.706-713
• /
• 2011

This study was conducted to investigate the chemical characteristics of Gochujang with different amounts of sweet persimmon powder added during fermentation at $20^{\circ}C$ for 90 days, in an effort to improve its taste and organoleptic quality. The moisture content was shown to be inclined to increase in all the treatments throughout the fermentation. There was no significant difference between the paste with sweet persimmon powder and the control. The pH showed a tendency to decrease with increased fermentation time in all the samples during fermentation, keeping a pH range of 4.64-4.67 after 60 days of fermentation. On the contrary, the titratable acidity increased during fermentation, showing a level of 0.147-0.156 mg% in the paste with sweet persimmon powder on the 90th day of fermentation. The sugar content was shown to be $33.67-39.67^{\circ}Brix$ in the early stage of fermentation, revealing a tendency to in crease with an increase in the amount of sweet persimmon powder added. The amino-type nitrogen content was at the 241.27-245.47 mg% level in the early stage of fermentation, and appeared to be significantly high (p<0.05) in the treatments with 3 and 4% sweet persimmon powder added, respectively, after 60 days of fermentation. The content was within the range of 357.47-371.53 mg% on the 90 th day of fermentation in the final stage, showing an increase trend throughout the fermentation. The alcohol content gradually increased with an increase in fermentation time, showing a range of 0.94-0.10% on the 90th day of the final stage of fermentation. Moreover, the content was highest (0.96-0.108%) on the 70th day of fermentation, demonstrating a trend to slightly decline in all the treatments thereafter.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.131-138
• /
• 1997

Campanulaceae having the most growing areas among medicinal crops cultivated in Korea occasionally failed to establish a reasonable standing in practice. The experiment was carried out to examine the effect of prechilling (0 : 4 : 8 days), light quality (red : white : dark) and daily irradiation hours (8 : 12 : 16) after sowing on seed germination and radicle elongation of Campanulaceae (Platycodon grandiflorum : Codonopsis lanceolata : C. pjlosula) to give an information on their earlier standing establishment. Mean germination rate of P. grandiflorum was the highest but that of C. pilosula was the lowest regardless of all the treatments. 12 hours irradiation or prechilling increased to 8 days enhanced their earlier or later germination, respectively. White light increased the rate of P. grandiflorum but alleviated that of C. lanceolata regardless of the daily irradiation hours. Although prechilling eliminated such effect of white light, light quality treatment effect on their mean germination rates was influenced by period after sowing, daily irradiation hours or prechilling. On the 9th day after sowing, C. lanceolata showed the greatest radicle length, and both daily 8 hours irradiation and 8 days prechilling enforced to elongate their radicles, while P. grandjflorum and C. lanceolata more lengthened their radicles in all prechilling treatments than in no chilling but C. pilosula showed the similar result only in the 8 days prechilling.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.41-48
• /
• 2010

In this study, grain size distribution of dredged soil and suspended solid distribution of supernatant in containment area were measured and compared with design prediction for suitability evaluation on prediction of suspended solid concentration of supernatant in conventional design of containment area. In addition to that, relationship were also analyzed between current velocity and suspended solid concentration of supernatant. Evaluation results show a relatively good agreement between field measurement and design prediction. On contrast, field measurement and design prediction show a quite different value each other in the early stage of dredging or at a point that current velocity increases. It is believed that this is due to that conventional design method of containment area does not account for ponding depth and current velocity which change sensitively with dredging period. Since current velocity and distribution of suspended solid concentration measured simultaneously show a similar trend, it is observed that there exists a close relationship between current velocity and distribution of suspended solid concentration. Therefore, a new design method for containment area, which can consider sedimentation of suspended solid that changes with interface height of dredged soil, ponding depth, current speed of supernatant, is necessary in order to predict the situation change of containment area more precisely.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.4
• /
• pp.243-248
• /
• 2022

The purpose of this paper is to etching SUS MASK by adding an additive (F300) to FeCl3. The equipment used in the experiment is a self-made automatic liquid management system. The automatic liquid management system is a device capable of controlling the Oxidation Reduction Potential (ORP) and specific gravity in real time and supplying FeCl3 and additives in a quantitative manner. SUS MASK was etched in units from 10 sheets up to 200 sheets for 1 minute. It was confirmed that when the initial SUS MASK was 10 sheets, the ORP value started with 628 mV and measured at 611 mV from the time of 40 sheets being injected, and maintained close to 610 mV up to 200 sheets. The specific gravity was maintained near 1.640. And the SUS MASK was measured close to 0.4 mm from 50 sheets to 200 sheets. The experimental conditions of ORP had a specific gravity of 610 mV, 1.463, an etching pressure of 3.0 kg/cm2, an additive (F300) ratio of 1.2%, and the hole size was measured by up to 200 sheets of 10 sheets at once etching. As a result, the diameter approached 0.4 mm from 20 sheets. Even if the number of SUS MASK was increased, the ORP and specific gravity were well controlled, and it was confirmed that the experimental target value was close to 0.4 mm.

• Geophysics and Geophysical Exploration
• /
• v.26 no.2
• /
• pp.84-93
• /
• 2023

The supervised learning-based deep-learning seismic inversion techniques have demonstrated successful performance in synthetic data examples targeting small-scale areas. The supervised learning-based deep-learning seismic inversion uses time-domain wavefields as input and subsurface velocity models as output. Because the time-domain wavefields contain various types of wave information, the data size is considerably large. Therefore, research applying supervised learning-based deep-learning seismic inversion trained with a significant amount of field-scale data has not yet been conducted. In this study, we predict subsurface velocity models using Laplace-domain wavefields as input instead of time-domain wavefields to apply a supervised learning-based deep-learning seismic inversion technique to field-scale data. Using Laplace-domain wavefields instead of time-domain wavefields significantly reduces the size of the input data, thereby accelerating the neural network training, although the resolution of the results is reduced. Additionally, a large grid interval can be used to efficiently predict the velocity model of the field data size, and the results obtained can be used as the initial model for subsequent inversions. The neural network is trained using only synthetic data by generating a massive synthetic velocity model and Laplace-domain wavefields of the same size as the field-scale data. In addition, we adopt a towed-streamer acquisition geometry to simulate a marine seismic survey. Testing the trained network on numerical examples using the test data and a benchmark model yielded appropriate background velocity models.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.99-110
• /
• 1995

치주치료의 궁극적 목표인 치주조직 재생에 대한 관심이 높아지는 가운데 치주조직 재생에 주된 역할을 하는 치주인대세포와 치근면 탈회에 의한 신부착 효과에 관한 많은 연구가 시도되고 있다. 그러나 광범위한 연구에도 불구하고 어떤 치근면 처리가 신부착 형성에 가장 효과적인지는 아직 논란의 대상으로 남아있다. 이에 저자는 결합조직 부착에 의한 재생에 필수적인 치은 및 치주인대 섬유아세포의 부착 및 증식을 tetracycline-HCL(TC)과 citric acid(CA)로 각각 처리된 상아질 표면에서 비교관찰하여 치주조직 재생에의 기여도를 추정하기 위해 본 연구를 시행하였다. 교정치료를 위하여 본원에 내원한 환자의 제일 소구치의 건강한 치은조직을 채취하고, 발치 후 효소처리에 의한 치주인대세포를 얻은 후 각각 세포배양하였다. 상아질 절편은 $3{\times}3{\times}0.2mm^3$로 준비하고 TC과 CA처리군으로 나눈 후 각각 치은 및 치주인대 섬유아세포를 부착시키고 초기부착은 8시간까지, 증식은 7일까지 고나찰하여 다음의 결과를 얻었다. 1. 각 군의 세포 부착은 시간이 지남에 따라 증가되었다. 2. 모든 군에서 7일째 빠른 증식상을 보였다. 3. 초기 부착시 치은과 치주인대 섬유아세포의 반응에는 유의한 차이가 없었다. 4. 반면에 치은과 치주인대 섬유아세포는 증식속도에서 차이를 나타내었으며 치은 섬유아세포가 좀 더 빠른 성장을 보였다. 5. 치근면 탈회에 따라 초기부착과 증식상에서 모두 유의성 있는 증가를 보였다. 6. CA는 초기부착에서, TC는 증식장에서 더욱 효과적으로 작용했다.

• Journal of the Korean Magnetics Society
• /
• v.18 no.2
• /
• pp.79-83
• /
• 2008

We have investigated the effect of the formation of an initial oxide layer on the fabrication of the porous aluminium oxide. The porous aluminium oxide was fabricated by two-step anodization process with a electropolished aluminium foil. Before the first anodization step, the initial oxide layer with thickness of 10 nm was formed under the applied voltage of 1 V and later the anodization was continued under 40 V using oxalic acid solution. With the formation of the initial oxide layer, the anodization process was stable and the anodization current was constant throughout the process. In case of the absence of the initial oxide layer, the anodization was very unstable and the continuous increase in the anodization current was observed. This indicates the formation of the initial oxide layer on the aluminium surface prevents the burning of the surface due to the nonuniform distribution of the applied electric field, and allows the stable anodization process required for the porous aluminium oxide.

• Korean Journal of Ichthyology
• /
• v.13 no.4
• /
• pp.248-253
• /
• 2001

An histological study was conducted to determine the initial treatment time and treatment duration in the use of sex-reversal hormones in relation to gonadal development and sexual differentiation in the bagrid catfish, Leiocassis ussuriensis. The primordial germ cell, which could be recognized from one-day-old fry, began to protrude into the peritoneal cavity between the mesonephric duct and the gut. The primordial gonad with a genital ridge was developed at 5~10 days after hatching. Sex differentiation of the ovary was identified by the ovarian cavity and meiotic oocytes from 20-day-old larvae. Testicular differentiation was also identified by spermatogonial cells from 20-day-old larvae. It may therefore be concluded that this species belongs to the differentiated type of gonochoristic teleost.