• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.219-223
• /
• 2007

관측자료 없이 지형인자만으로 미계측 유역의 유출수문해석이 가능한 GIUH(Geomorphologic Instantaneous Unit Hydrograph)의 초기확률을 상안미, 병천, 산계 유역에 대하여 분석하였다. GIUH 이론에서 하천차수가 증가할수록 면적비에 대한 분기비의 영향이 증가하여 대상유역에서의 초기확률이 음수로 발생할 확률이 커진다. 본 연구의 4차하천으로 가정된 모든 대상유역에서의 초기확률 역시 음수로 발생하였다. 뿐만아니라, 3차 하천으로 가정된 경우에도 2차 하천의 합류부에서 유역출구까지의 거리가 짧은 산계유역의 경우에는 면적비에 대한 분기비값이 상대적으로 큰 값을 갖게되어 초기확률이 음수로 발생하였다. 본 연구에서는 초기확률이 음수로 발생하는 문제점을 보완하기 위하여 직접유출면적비를 사용하여 초기확률을 산정하였다. 그 결과, 적절한 초기확률값을 얻을 수 있었으며 순간단위도의 초반부 음수 발생문제를 해결하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.416-426
• /
• 2003

In this paper we propose a new method for choosing the initial values of Expectation-Maximization(EM) algorithm that has been used in various applications for clustering. Conventionally, the initial values were chosen randomly, which sometimes yields undesired local convergence. Later, K-means clustering method was employed to choose better initial values, which is currently widely used. However the method using K-means still has the same problem of converging to local points. In order to resolve this problem, a new method of initializing values for the EM process. The proposed method not only strengthens the characteristics of EM such that the number of iteration is reduced in great amount but also removes the possibility of falling into local convergence.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.346-347
• /
• 2020

본 논문에서는 ANC 시스템의 빠른 수렴을 위한 적응 필터의 초기화 방법을 제안한다. 기존 ANC 시스템은 적응 필터의 계수를 0으로 초기화한다. 이러한 초기화 방법은 일반적으로 발생하는 외부 소음의 특성을 고려하지 않은 방법으로 ANC의 수렴 소요시간이 길다. 이와 같은 문제를 해결하고자 본 논문에서는 핑크 노이즈를 입력으로 ANC를 수행하여 얻은 적응 필터의 계수 값을 초기값으로 사용하는 새로운 초기화 방법을 제안한다. 제안한 방법으로 여러 잡음에 대해 실험한 결과, 낮은 초기 에러를 갖고 기존 방법보다 빠르게 수렴하는 것을 확인하였다. 또한, 기존 방법에서 수렴하지 못한 일부 소음에 대해서도 수렴하는 것을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2071-2078
• /
• 2009

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP (Quantization Parameter) for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 35 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we use a linear model because there is a linear inverse proportional relationship between the output bandwidth and the optimal intial QP. Model parameters of the model are determined depending on the spatial complexity of the first frame. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JM algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1307-1310
• /
• 2008

EM(Expectation Maximization)은 불확실한 데이터들을 가지고 분포를 모델링하는, 널리 알려진 군집화 알고리즘이다. EM 알고리즘에서, 정규 분포는 기대(Expectation)-최대화(Maximization)과정을 반복하는 과정에서 그 윤곽을 다져간다. 이 때 이 과정은 EM 알고리즘의 다양한 확률 초기화에 따라 다른 결과를 내게 된다, 본 논문에서는 이 확률 초기화 값의 조정을 통하여 HAPS(High Altitude Platform Station) 기반 네트워크에서 이동 기지국의 위치를 실시간으로 결정하고자 하는 문제를 풀기 위한 조건을 몇 가지 반영시켜 확률 초기 값을 결정해 보고, 그 결과를 제시한다. 이에 더불어, ITU에서 제한하고 있는 이동 기지국의 서비스 반경을 고려하는 방법을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.380-384
• /
• 2007

MLP(Multi-Layer Perceptron)를 이용한 학습은 간단한 구조에도 비선형 분류가 가능하다는 장점을 가지고 있다. 하지만 오류역전파 알고리즘을 사용함으로써 시간의 소모가 크고 원치 않는 결과값으로의 수렴가능성을 배제할 수 없다는 단점을 가지고 있다. 이는 초기설정의 의존도가 높기 때문에 발생하는 문제들로 좋은 결과값에 근접한 곳으로 초기화가 이루어지면 좋은 학습 성능을 보이지만 반대로 좋은 결과값으로부터 멀리 떨어진 곳으로 신경망의 초기화가 이루어지면 학습 성능이 현저히 낮아지는 현상을 보인다. 본 논문에서는 MLP 전체의 층을 대상으로 하는 본 학습이 이루어지기 전에 RBM(Restricted Boltzmann Machine)을 이용, 층간 선행학습을 행하고 그 결과로 얻어지는 가중치와 바이어스를 본 MLP 학습의 초기화 데이터로 사용하는 개선 MLP 학습 알고리즘을 제안한다. 이 방법을 사용함으로써 MLP 학습 속도향상은 물론 원치 않는 지역해로의 수렴까지 방지할 수 있어 전체적인 학습 성능향상이 가능하게 된다.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.214-220
• /
• 2019

The calibration method of the initial value error obtained in the weight measurement through anchor bolt type strain gauge sensor is proposed. The strain gauge sensor is developed for preventing the overturning of forklift, which is the most frequent type of safety-accident in industry. It was confirmed that the initial value error is caused from the physical and mechanical error of anchor bolt, and the environmental problem. Since the elimination of these causes falls outside the realm of this research, we find out the calibrated values based on all the causes, and we adjust the initial values of analog-to-digital convertor (ADC) module consisted of strain gauge sensor block using the calibrated values. We use the linear interpolation method for our calibration. We confirm that four sensor modules have the different under 5% between the real weight and the measured value in the experiment applied with the calibration of initial values. The low correlation between the real weights and ADC values is also improved through the proposed calibration.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1947-1954
• /
• 2012

The first frame is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the initial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. In the case of low bit rate video coding, the initial QP value is fixed to 40 regardless of the output bandwidth. Although this initialization scheme is simple, yet it is not accurate enough. An accurate initial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In the proposed scheme, we determine the initial QP according to the ratio of the first frame to the total bits allocated to a GOP. To estimate the QP of the allocated bits, Rate-QP model is used. It is shown by experimental results that the new algorithm can predict the optimal initial QP more accurately and generate the PSNR performance better than that of the existing JVT algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1377-1383
• /
• 2012

The first frame of a GOP is encoded in intra mode which generates a larger number of bits. In addition, the first frame is used for the inter mode encoding of the following frames. Thus the intial QP for the first frame affects the first frame as well as the following frames. Traditionally, the initial QP is determined among four constant values only depending on the bpp. Although this initialization scheme is simple, yet it is not accurate enough. An accurate intial QP prediction scheme should not only depends on bpp but also on the complexity of the video sequence and the output bandwidth. In this paper, we propose a traffic model for finding the optimal initial QP which maximizes the PSNR of the GOP. We also propose a method to find model parameters for real-time video encoding. It is shown by experimental results that the proposed traffic model captures initial QP characteristics effectively and the proposed method for model parameters accurately estimates the real values.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.205-216
• /
• 1998

A solution method is presented to solve the eigenvalue problem arising in the dynamic analysis of nonclassicary damped structural systems with multiple eigenvalues. The proposed method is obtained by applying the modified Newton-Raphson technique and the orthonormal condition of the eigenvectors to the linear eigenproblem through matrix augmentation of the quadratic eigenvalue problem. In the iteration methods such as the inverse iteration method and the subspace iteration method, singularity may be occurred during the factorizing process when the shift value is close to an eigenvalue of the system. However, even though the shift value is an eigenvalue of the system, the proposed method provides nonsingularity, and that is analytically proved. Since the modified Newton-Raphson technique is adopted to the proposed method, initial values are need. Because the Lanczos method effectively produces better initial values than other methods, the results of the Lanczos method are taken as the initial values of the proposed method. Two numerical examples are presented to demonstrate the effectiveness of the proposed method and the results are compared with those of the well-known subspace iteration method and the Lanczos method.