• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2233-2238
• /
• 2013

A novel design method of ultra wideband based on the composite right-/left handed (CRLH) transmission line is presented in this paper. Defected ground structure and microstrip interdigital coupler are used to implement the CRLH transmission line. The proposed CRLH transmission line in this paper have composite characteristics of low pass filter and high pass filter, also it has good advantages of low insertion loss and ultra wide passband characteristics. The structure with different cell number are studied, and the UWB filter using 3-cell CRLH transmission line is fabricated and measured, which shows a good agreement between simulated and measured results. It has center frequency of 5 GHz, fractional bandwidth of 105 %, and insertion loss of 0.7 dB at center frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.431-433
• /
• 2018

This paper proposes the system that offer super-wideband speech which is made by artificial bandwidth extension technique using wideband speech signal in time-domain. wideband excitation signal and line spectrum pair(LSP) are extracted based on source-filter model in time-domain. Two parameters are extended by each bandwidth extension algorithms, and then, super-wideband speech parameters are estimated. and synthesized. Subjective test shows super-wideband speech is better speech quality than wideband speech signal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.620-624
• /
• 2010

In this paper, design and manufactured UWB BPF. Manufactured UWB BPF can miniaturize the structure by controlling impedance and biographical one dimension that is allocated in transmission line each section. Proposed UWB BPF designed most suitable using Agilent company's ADS2008 Momentum and Ansoft company's HFSS 10. Manufactured UWB BPF has pass-band filter of 3.1 [GHz]~10.6 [GHz] and insertion loss is 0.39 [dB] in 8.3 [GHz], and reflection loss displayed special quality of 12.394 [dB] in 9.37 [GHz].

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.36-40
• /
• 2013

A novel design method of ultra wideband bandpass filter using CRLH transmission line with Dumbell type DGS is presented in this paper. Defected Ground Structure and microstrip interdigital capacitor are used to design the ultra wideband (UWB) filter. CRLH transmission line has composite characteristics of low pass and high pass filter. As control of cutoff frequency of low pass and high pass response on CRLH transmission line, we can get characteristic of UWB filter. We designed and simulated for CRLH transmission lines with one, two, four, and eight cells. A UWB filter using four cells CRLH is designed and fabricated to verify the results. The characteristics of designed filter have center frequency of 5GHz and relative bandwidth of 88%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.2017-2019
• /
• 2004

본 논문에서는 S/C-밴드(2${\sim}$8GHz)에서 동작하는 초광대역 주파수 합성기를 설계하였다. 먼저 S-밴드(2-4GHz) 광대역 전압제어발진기를 가지고 획득시간을 단축하기 위한 연산 증폭기를 사용한 DA변환기와 능동루프 필터(Active Loop Filter)로 구성된 S-밴드 주파수 합성기를 설계하였다. 그리고 주파수 체배기, SPDT RF 스위치를 통합하여 최종적으로 S/C-밴드 초광대역 주파수 합성기를 설계하였다. 제작된 주파수 합성기는 200kHz 비교주파수에서 위상잡음은 100kHz 옵셋 주파수에서 -92dBc/Hz이하, 불요주파수 특성은 -62.33dBc 이하, 획득시간은 1.3ms 이하로 측정되었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.158-165
• /
• 2013

In this paper, a new circuit topology of an ultra-wideband (UWB) 3.1-10.6GHz CMOS low noise amplifier is presented. The proposed UWB low noise amplifier is designed utilizing RC feedback and LC filter networks which can provide good input impedance matching. In this design, the current-reused topology is adopted to reduce the power consumption and the inductor-peaking technique is applied for the purpose of bandwidth extension. The performance results of this UWB low noise amplifier simulated in $0.18-{\mu}m$ CMOS process technology exhibit a power gain of 14-14.9dB, an input matching of better than -10.8dB, gain flatness of 0.9dB, and a noise figure of 2.7-3.3dB in the frequency range of 3.1-10.6GHz. In addition, the input IP3 is -5dBm and the power consumption is 12.5mW.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.1-8
• /
• 2011

In this paper, a microstrip bandpass filter(BPF) with 3 dB bandwidth of more than 50 % at center frequency of 30 GHz was implemented. The implemented BPF is to be used as ASK(Amplitude Shift Keying) transmission and reception filters in IF band for THz transmitter and receiver capable of 10 Gb/s wireless data transmission. The microstrip BPF with ultra-wideband characteristics was implemented using a stepped-impedance lowpass filter(LPF) and a composite quarter-wave short stubs where the LPF is functioning as attenuating the upper stopband and quarter-wave short stubs is functioning as attenuating the lower stopband. The measured results are as follows; the insertion loss is 0.65 dB at 30 GHz, the stopband characteristics are -10 dB and -16 dB at 10 GHz and 50 GHz, respectively, and the passband flatness is ${\pm}0.5$ dB at 20~40 GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.96-107
• /
• 2013

In this study, we examine the effect of spreading sequence matched filtering on the power parameters of ultrawideband (UWB) multiuser interference (MUI) under different multiple access (MA) scenarios. More specifically, we investigate the manner in which the length of the sequence MF affects the average power, peak power, and the peak-to-average ratio (PAR) of the matched filtered version of an MUI signal. The results of the analysis performed for a simplified scenario are supported by the simulation results obtained for a realistic multipath environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.89-94
• /
• 2006

A compact microstrip band-selective filter for ultra-wideband(UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator band-stop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band(3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is $29\;\%$ size reduction in footprint compared to the traditional band-stop filter using L-shaped resonators. The measured results show that the filter has a wide passband of $146.7\;\%$(2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of $10.04\;\%$(5.2 GHz to 5.75 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.