• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.42-47
• /
• 2007

In this paper, influence of lossy ground and gap variation between lossy ground and UWB antenna on impulse propagation in time domain for impulse ground penetrating radar (GPR) is numerically and experimentally investigated. For this study, a novel planar UWB fat dipole antenna is developed. First, influence of lossy ground and gap variation between lossy ground and UWB antenna is simulated. For verification, a test field of sand and wet clay soil is built and using the developed dipole antenna, transmission behavior is investigated at the test field. With an aid of IDFT (inverse discrete Fourier transform), time domain impulse response for transmission coefficient measured and simulated in frequency domain is obtained. Measurement and simulation show that the frequency of maximum transmission coefficient and transmission coefficient are increased with higher dielectric constant and larger gap distance. In time domain, it is shown that for higher dielectric constant, the amplitude of the received signal in time domain is higher and reflected signals are seriously modified. Also, it is found that variation of gap between antenna and ground surface makes timing of peak value changed.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.2
• /
• pp.93-98
• /
• 2024

This paper presents the method to extract the ultrawide-band (UWB) signal and proposes the simple impulse radar system for sensing real-based target within close-range area. The proposed impulse radar system consists of impulse generator, ultrawide-band antennas, function generator, and digital oscilloscope. It is verified by experiment that a differentiated Gaussian pulse is generated with 200ps of pulse width and corresponding spectrum from 0.3 to 4.7 GHz once a sinusoidal wave with 10MHz is excited. The Gaussian doublet is received by identical antennas and it is shown that the UWB pule width of 328ps and its spectrum is from 0.9 to 4.4 GHz. It is confirmed that the UWB pulse is extracted when the real-based targets such as circular target with 4cm radius and corner reflector are placed at the close-range area.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.2
• /
• pp.117-122
• /
• 2009

In this paper, the performance of double binary turbo code is analyzed and simulated in ultra wide-band (UWB) systems employing multiple-antenna scheme. We consider both pulse position modulation-time hopping (PPM-TH) and pulse amplitude modulation-direct sequence (PAM-DS) UWB systems. The space time block code (STBC) scheme is adopted as a transmit diversity method. Also, receive diversity scheme is applied. And double binary turbo code is applied to the UWB system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1221-1228
• /
• 2016

In this paper, we propose a modified rhombus slot UWB(Ultra Wide Band) antenna with fork-shaped feeding structure. The proposed antenna is modified rhombus slot structure and fork-shaped feeding structure to get ultra-wideband characteristics for UWB communication. Modified rhombus slot structure consists of slot shaped which eliminated upper and lower part of the basic rhombus slot. The antenna is designed on an FR-4 substrate of which the dielectric constant is 4.4, and its overall size is $34mm(W_1){\times}34mm(L_1){\times}1mm(t)$, and its slot antenna size is $30mm(W_2){\times}16.75mm(L_3+L_4)$. After carrying out the simulation of each parameters, optimized values are obtained. From the fabricated and measured results, return loss of the proposed antenna satisfied Return Loss -10dB in 3.1 ~ 10.6 GHz. And measured results of gain and radiation patterns characteristics displayed for operating bands.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.3
• /
• pp.32-39
• /
• 2009

In this paper, system optimization design technique of an impulse ground penetrating image radar (GPIR) in time domain is proposed to improve depth resolution of the system. For the purpose, time domain analysis method of key components such as impulse generator and UWB antenna is explained and by simulation, parameters of each component are determined. In particular, by standardizing the impulse signal, spectrum efficiency of a radiated impulse signal is improved and a U-shaped planar dipole antenna for a UWB antenna is developed. By equipping a parabolic metal reflector with the proposed antenna, external noise is prevented and the ability of radiating an input impulse into ground is improved. In addition, to remove ringing effect of the propose antenna which causes serious degradation of the system performance, resistors are loaded at the edge of the antenna and then Tx and Rx UWB antennas are optimized by simulation in time domain. For images of targets buried under the ground migration technique is applied and influence of tough ground surface on distortion of received impulse signals is reduced using technique of noise and signal distortion reduction in time domain and its time resolution is enhanced. To verify the design optimization procedure, a prototype of an GPIR and an artificial test field are made. Measurement results show that the resolution of the system designed is as good as that of a theoretical model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1414-1416
• /
• 2016

In this paper, a SWB (Super-WideBand) dipole antenna with self-complementary structure is proposed for signal intelligence. The proposed antenna consists of a self-complementary dipole antenna and a tapered balun for balanced feeding. The measured -10 dB reflection bandwidth of the proposed antenna is more than 28:1 (0.73-20 GHz) and 3 dB axial ratio bandwidth is 3.25:1 (1.91-6.22 GHz) with RHCP (Right Hand Circular Polarization) at +z direction. The measured radiation patterns are omni-directional in lower frequency band and bi-directional in higher frequency band. The measured peak gain within -10 dB reflection bandwidth varies from 2.83 dBi to 7.66 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.257-267
• /
• 2015

This paper presents a ultra-wideband sinuous antenna that operates in a whole frequency range (0.824~5.85 GHz) of Cellular/GSM-800, GSM900, ISM, GPS, DCS/GSM1800, PCS/GSM1900, WCDMA/UMTS/IMT2000, WiBro, WLAN and WiMax. The proposed antenna, which is composed of two sinuous arms, is designed as a self-complementary structure in order to have frequency-independent characteristics. It also uses a wideband balun of Klopfenstein taper structure to match to $50{\Omega}$. Experimental results show that the -10 dB return loss bandwidth of the proposed antenna is 5.24 GHz that ranges from 0.76 to 6 GHz, which covers all the frequency bands of the various wireless services. Within the entire operating frequency range, the measured radiation patterns in both E-plane and H-plane show nearly constant bidirectional broadside beams and the maximum antenna gain is measured to fall between 2.32~6.01 dBi.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.199-203
• /
• 2005

In this paper, a novel compact and frequency band-notch antenna for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows good impedance bandwidth for ultra-wideband but has band notch characteristic for the frequency band of $5.15\~5.825\;GHz$ limited by IEEE 802.1la and HIPERLAN/2. To achieve both properties of wide band and band notch, the techniques of a concaved ground plane and inserted U-shaped thin slot into planar radiator are used respectively. A manufactured antenna satisfied VSWR<2 for the frequency band of $2.95\~11.7\GHz$ except the limited band of $4.92\~5.866\;GHz$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.188-191
• /
• 2003