• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.202-213
• /
• 2003

Tower Palace III project is the highest residential and commercial high-rise complex building in Korea. In order to construct a high-rise building, advanced construction and engineering technology is required. Therefore, with more developed construction and engineering technology based upon accumulated knowledge, construction speed of 13.4 days per floor including finish work was achieved in this project. To achieve this project successfully, three main advanced construction technology were applied: 1) Construction methods for 3-day cycle of structural work and curtain wall, 2) Tact scheduling method for finish work, 3) Management system of material, labor, work, and information. Also, four main engineering technology were applied: 1) New material such as high -flowing concrete and high strength concrete of 800 kgf/cm2, 2) New method such as a pipe-cooling system of a cool water circulating type, 3) Mechanical system such as smart-fan controlling kitchen-ventilation system, 4) Electrical system such as false car system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.58-61
• /
• 2002

A high-rise Mixed-use building is a multi-purpose which has commercial, business and residential uses. In Korea, after the middle of 1990's, the rate of residential parts was Increased to 90%. Now, the residential parts finally bacame mainly. And residental spaces are more important than before. Residential spaces are according to variety trends such in their areas. Some companies have several interior design trend in their building. They sometimes use the interior trend when to sell their goods(apartments) in their macketing. Modern design is presented in almost dwelling-units-types. But Classic type is presented in large-units-types. Minimal design is presented in only some middle-units-type as well as in the cases of the companies having definite interior trend. Interior design trend is one another factor in dwelling spaces design.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.727-734
• /
• 2005

High-rise residential buildings these days tend to adopt a building frame system as primary earthquake resisting structural system for some architectural reasons. But there exist several ambiguities in designing such building frame systems according to current codes with regards to : the effective stiffness property of RC cracked section in static and dynamic analyses, analytical model to evaluate story drift ratio, and deformation compatibility requirements of frames. The comparative study for these issues by appling KBC 2005 to a typical building frame system shows that demands of member strength and story drift ratio can be different significantly depending on engineer's Interpretation and application of code requirements. And a building frame system can be noneconomical, compared with the dual system, because of higher demands on strength or ductility in both frames and shear walls.

• KIEAE Journal
• /
• v.7 no.4
• /
• pp.75-80
• /
• 2007

The purpose of this study is to analyze architectural plans of lower part of super tall mixed-use residential building for understanding its functions for urban. The area of this research are limited to super tall mixed-use residential building which were built in Seoul, Kyoung-gi area, and new towns. For this purpose, theories for super tall mixed-use residential building and non-housing parts were researched, and characteristics of selected cases for field research were analyzed by studying drawing materials. The research focused on scale, type of building, included programs for public spaces, and characteristics of location. As a result, every cases were designed as 'outdoor transition zone-centered type', and for urban function, non-housing facilities were condensed to increase convenience. In addition, ratio of non-housing part were incresesed with public spaces design for residents, and various programs were inserted.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2000.11b
• /
• pp.137-142
• /
• 2000

The objectives of this study were to be properly understood the residential function and its relations to the mixed functions of the mixed-use buildings and further to provide useful information in future basic planning of mixed-use buildings. 1) The satisfaction rates of the public space and the supplementary facilities were high in general, but the satisfactory rate of the convenience facilities was low. 2) The household characteristics were analyzed as variables that differences among satisfaction rates. However, they were not found to be influential factors in determining residential satisfaction. 3) The residential characteristics were analyzed as variables that differences among satisfaction rates. As a result, the floor and direction of the residence were more meaningful variables than the scale of the residence.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.2
• /
• pp.136-145
• /
• 2007

This study analyzes the current usage of SD500 high-strength re-bar in domestic construction sites. Also, an evaluation method was developed to measure economic efficiency of lap splice and coupler splice, which are most commonly used in connection SD500. The evaluation method was applied to construction sites in Seoul in December 2006, and the result revealed that coupler splice is relatively superior in terms of cost efficiency when the re-bar diameter is bigger and the concrete strength is lower.

• Journal of Internet Computing and Services
• /
• v.11 no.3
• /
• pp.53-63
• /
• 2010

In this paper, the u-Service system that is based on location-aware technology is designed and implemented for a silver town. On the real silver town the developed system has been employed and tested to provide convenient and secure living for residents. It provides services such as emergency call, intelligent elevator operation, and hands-free door access based on the location of the residents with personal device as called smart tag. It can also be applied to other service areas such as the location-aware u-Service for hospital, high-rising complex building, APT, etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.3
• /
• pp.620-626
• /
• 2007

The main objective of this study is to analyze setback patterns of the super-highrise residential buildings in respect to the formal variations of the floor plans. Along with the illumination of the definition of setback, the early part of the paper attempts to establish criteria for the analysis of the setback cases. The research of 38 setback floor plans as well as the typical floor plans of 17 super-highrise buildings carried out through analysis criterions under three categories; physical features, primary causes, and formal types of setback. The result shows a method of evaluating setbacks and setback's potentials in designing the super-highrise buildings for the variation of building form, size, and type.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.81-89
• /
• 2005

The purpose of this thesis is thermal performance simulation about various type that can apply in the high-rise residential building to estimate condensation performance of window that is consisted of frame and glazing in curtain wall. The result of this thesis are summarized as follows. First, condensation occurrence point when relative humidity is $30{\cdot}40{\cdot}50\%$ is shortest Low-e double glass. Difference by type of gas and spacer was a little by $2{\~}6$ cm, among it, the case that apply krypton in gas and the case that apply double seal in spacer were less condensation occurrence distribution. Second, when analyzed improved proposal of window and existing plan through simulation, improved proposal is superior from general side of the interior and exterior temperature, thermal break surrounding temperature and temperature of frame end, condensation occurrence point etc. Therefore, if it was used improved proposal with effect that improve in curtain wall of high-rise residential building, it may improve window condensation performance of curtain wall.

• 월간 기계설비
• /
• no.3 s.212
• /
• pp.50-55
• /
• 2008

롯데건설(주)은 1959년 창립해 도로, 교량, 항만 등의 대규모 토목공사와 첨단 인텔리전트 빌딩, 호텔, 쇼핑센 터 및 고급 아파트 등의 건축공사를 통해 국가산업 발전과 주거문화 향상에 기여하고 있다. 롯데건설(주)은 잠실 롯데월드를 비롯해 전국에 롯데호텔 · 백화점을 건설하며 테마파크, 관광, 유통시설 건설에 남다른 기술과 노하우를 축적하고 현재 서울, 부산에 100층 이상의 초고층 건물인 제2롯데월드 건설 추진등 수익 다각화를 위해 끝없이 노력하고 있다. 또한 중세 유럽성의 긍정적인 이미지를 아파트 브랜드에 적용, 주택시장의 고급화, 차별화를 선도해왔다. 이런 노력의 결과 롯데건설(주)은 2007년 매출 3조1,608억원, 수주 6억원을 달성했고 올해 매출 3조8,000억원, 수주 8조원을 목표로 정진하고 있다.