• Title/Summary/Keyword: 체화

Search Result 420, Processing Time 0.029 seconds

A Study on the Queueing Simulation of Lock Gates according to the Functional Rearrangement in Incheon Port (인천항 기능 재배치에 따른 갑문의 대기 시뮬레이션 연구)

  • Koo, Ja-Yun
    • Journal of Navigation and Port Research
    • /
    • v.31 no.3 s.119
    • /
    • pp.205-212
    • /
    • 2007
  • Due to the construction of Incheon Grand Bridge, there is driven a necessity for rearranging the function of Inner Port with the development of Outer South Port. In this paper, I'd like to simulate the port operation levels of Lock Gate in Inner Port with estimating the traffic volumes of 2011 and 2015, which will reveal the Demurrage Cost and the Accumulation Cost of Freight in Inner Port. Finally I will evaluate the economic movement effects of the container ship's calling from Inner port to South Port/Outer South Port from 2011 to 2015. The results are as followings ; (1) The average utilization of Lock Gates are reduced by $7\sim8$ percentage point. (2) The mean queueing value are saved by 25 percentage point. (3) The Demurrage Cost and the Accumulation Cost of Freight except Lock Gate charges and the Benefit of Routeing Reduction are saved about 800 million Won annually.

Determination of the Concentration of Panaxynol, Panaxydol and Panaxytrio1 by Capillary-GC(FID) (Capillary-GC(FID)에 의한 panaxynol, panaxydol 및 panaxytriol의 정량)

  • 노길봉;손현주
    • Journal of Ginseng Research
    • /
    • v.13 no.2
    • /
    • pp.183-188
    • /
    • 1989
  • A gas chromatographic method was developed for determination of the concentration of three major polyacetylene compounds in ginseng roots---panaxynol, panaxydol and panaxytriol. The column and the detector used were an SPB-1 fused silica capillary (0.2mm i.d.$\times$30m, Supelco) and a flame ionization detector (FID). The column oven temperature was kept at $250^{\circ}C$ isothermally The retention times of panaxynol, panaxydol and panaxytriol peaks were 4.2,5.1 and 6.9 min before TMS-derivatitration and 4.5,5.4 and 7.4 min after TMS-derivatization, respectively. The minimum determinable concentrations of panaxynol, panaxydol and panaxytriol before TMS-derivatiEation were at the 20, 50 and 100 ppm levels, while the concentrations of panaxydol and panaxytriol as well as panaxynol after TMS- derivatisation could be towered to the 5 ppm level. The panaxynol, panaxydol and panaxytriol contents in red ginseng were determined by use of this method after TMS-derivatization : the amounts obtained were 724, 721 and 71$\mu\textrm{g}$/g, respectively.

  • PDF

DEVELOPMENT AND COMPARISION OF RESIDUE ANALYSIS FOR BENOMYL IN BEAN AND BEAN SPROUTS (두류와 콩나물에서의 BENOMYL의 검색과 그 분리에 관한 연구)

  • Han, Ilkeun;Chai, Jeungyoung;Lee, Jayoung;Yeo, Ikhyun
    • Analytical Science and Technology
    • /
    • v.7 no.3
    • /
    • pp.395-402
    • /
    • 1994
  • Benomyl(Methyl-1-(Butyl Carbamoyl)-Benzimidazole-2-yl-Carbamate) is widely used as pre- and post-harvest pesticide. It converts into MBC(Carbendarzime:Benzimidazole-2-yl-carbamate) and butyl-isocyanate in mild condition. In this study, three analytical methods for MBC were compared in view of detectability, correctness, and sensitivity. The first and second are HPLC analytical method employing the UV detection of MBC. Our new third method was modification of PFBB(pentafluoro-benzylbromide) derivatization method with GC-ECD & MSD. The average recoveries and detection limit of MBC in the newly modified method are 95% and $0.001{\mu}g/g$ in whole bean and bean sprouts respectively. This new method prevent pesticide analysis from misdetecting in bean and bean sprouts.

  • PDF

Determination of Trace Amounts of Formaldehyde in Water Using High Performance Liquid Chromatography and Acetylacetone as a Derivative Reagent (아세틸아세톤 유도체화 시약과 HPLC를 이용한 미량 포름알데하이드 수질분석)

  • Lee, Ki-Chang;Park, Jae-Hyung;Lee, Wontae
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.37 no.2
    • /
    • pp.81-86
    • /
    • 2015
  • A simple analytical method to quantify formaldehyde in water at lower levels (${\mu}g/L$) was developed using a high performance liquid chromatography (HPLC) and acetylacetone as a derivative reagent. Unlike conventional methods, no extraction and/or concentration were required. The derivative reagent was added into samples and reacted for 30 minutes at $80^{\circ}C$ prior to the analysis of formaldehyde using HPLC. The method detection limit and the limit of quantification for this method were 1.6 and $5.0{\mu}g/L$, respectively. This method also achieved high precision (0.6-3.0%) and accuracy (91.6-106.3%). The recovery rates for various environmental samples ranged from 92.0 to 115.2%.

Tensile Properties of Powder Metallurgy Processed PM Cu-7.5Ni-5Sn Alloy with Different Heat Treatment Conditions (분말야금법으로 제조된 Cu-7.5Ni-5Sn 합금의 열처리 조건에 따른 기계적 특성의 변화)

  • Ryu, Jae-Cheol;Kim, Sang-Sik;Han, Seung-Jeon;Kim, Chang-Ju
    • Korean Journal of Materials Research
    • /
    • v.9 no.9
    • /
    • pp.905-912
    • /
    • 1999
  • Tensile properties of powder metallurgy (PM) processed Cu-7.5Ni-5Sn alloys, either as-received or additionally solution heat treated, were examined as a function of aging time. It was found that the as-received Cu-7.5Ni-5Sn alloys showed an abrupt increase in tensile strength after aging at $350^{\circ}C$ for 20 minutes, due to the metastable ${\gamma}$\\` precipitation and a marginal Spinodal decomposition. The resolutionized PM Cu-7.5Ni-5Sn alloys, on the other hand, showed a gradual increase in tensile strength from the very early stage of aging. The overall tensile strength of resolutionized PM Cu-7.5Ni-5Sn alloys, however, was lower than that of the as-received and aged counterparts, due to the grain growth during resolutionization. Afterprolonged aging for the as-received PM Cu-7.5Ni-5Sn alloys, a considerable amount of discontinuous precipitates formed along the grain boundaries. The formation and growth kinetics of such discontinuous precipitates appeared to be dependent on the heat treatment conditions, and affect the mechanical properties greatly.

  • PDF

A Study on the EPL Education Platform Based on Embodied Cognition

  • Jihye Kim;SeungYeop Han;SunKwan Han
    • Journal of the Korea Society of Computer and Information
    • /
    • v.29 no.8
    • /
    • pp.201-208
    • /
    • 2024
  • This study aimed to improve the EPL education platform, Rewond (rewond.com), which was built as a prototype, into an EPL educational tool based on Embodied Cognition. In the first phase, the heuristic evaluation, five experts were selected to evaluate the subject using evaluation items that included learning principles of Embodied Cognition. Based on the evaluation results, debriefing session analysis, and consultations with co-researchers, three improvement points were identified and specific modification plans were proposed. During the beta version development phase, the co-researchers implemented an increase in coding content, provided help for each content, and added a feature that allows progression to the next learning stage upon completion of the previous one. In the final usability testing phase, the usability of the beta version was tested with ten fourth-grade elementary school students.

New Information Behavior Model: Life Paradigm Based (생명 패러다임 정보행태모델)

  • Lee, Hyuk-Jin
    • Journal of the Korean BIBLIA Society for library and Information Science
    • /
    • v.27 no.1
    • /
    • pp.217-235
    • /
    • 2016
  • Humanities academia and scientific community have been fused together in 21st centurty and it creates new theories and models. Among them, the embodied cognition theory has received attention in several related fields. This study reviews the major metatheories in information user behavior with their limitations. Then, "Life paradigm information behavior model" is suggested as a new theory, which communsurates with new era's request, introducing the embodied cognition theory and the entropy concept. By overcoming the limitations of individual approach to the information retrieval and user behaviors, we expect the discourse of the new integrated information retrieval paradigm.

Determination of Aflatoxins Using High-Performance Liquid Chromatography with Optimized Fluorescence Detection (HPLC에 의한 aflatoxin 분석법에 관한 연구-형광검출의 최적조건)

  • 김종규
    • Journal of Food Hygiene and Safety
    • /
    • v.13 no.1
    • /
    • pp.41-46
    • /
    • 1998
  • A postcolumn derivatization method was tried for the simultaneous determination of four major aflatoxins ($B_1,\;B_2,\;G_1,\;and\;G_2$) by high-performance liquid chromatography with fluorescence detection. As compared with a previous precolumn derivatization method, it was found that the postcolumn derivatization combined with an electrochemical cell (Kobra cell) was less time-consuming, safer, improved the sensitivity and selectivity, and provided good recoveries for aflatoxin $B_1$ (88.9%) and $G_1$ (100.5%). This method showed linearity from 10~100 ppb for aflatoxin $B_1\;and\;G_1$, and from 3~30 ppb for aflatoxin $B_2\;and\;G_2$. However, aflatoxin Bz and Gz were not detected satisfactorily although they showed good resolution.

  • PDF

Analysis of derivatized MX by Gas Chromatography/Mass Spectrometry (GC/MS를 이용한 MX 유도체화 분석법 연구)

  • Yoo, Eun-Ah;Park, Do-Yeon;Lee, Hyang-Ki;Myung, Seung-Woon
    • Analytical Science and Technology
    • /
    • v.15 no.3
    • /
    • pp.221-228
    • /
    • 2002
  • AMX is one of extremely high mutagenic compound produced from the reaction of the chlorine and the organic compound during the disinfection of tap water. In this paper, the chemical derivatization of MX with 2% sulfuric acid-methanol, iso-propanol, sec-butanol and n-butanol derivatives for the GC/MS analysis were tested or compared. Limit of detection for the EI and NCI mode were 25 pg and 1.25 pg, respectively. The good linear calibration curve was obtained the range of 25~2500 pg by EI and NCI