• Economic and Environmental Geology
• /
• v.51 no.5
• /
• pp.401-407
• /
• 2018

For the treatment of heavy metals in the mine drainage from the closed mine area, various methods such as passive, active and semi-active treatments are considered. Among contaminated elements in the mine drainage, Mn is one of the difficult elements for the treatment because it needs high pH over 9.0 for its concentration to be reduced. In this study, the efficiency of various slag complex reactors (slag (S), slag+limestone (SL) and slag+Mn coated gravel (SG)) on Mn removal in the presence of Fe, which is a competitive element with Mn, was evaluated to investigate effective methods for the treatment of Mn in mine drainage. As a result of experiments on Mn removal without Fe during 358 days, using influent with $30{\sim}50Mn{\cdot}mg/L$ and pH 6.7 on the average, S reactor showed continuously high Mn removal efficiency with the average of 99.9% with pH 8.9~11.4. Using the same reactors, Mn removal experiments with Fe during 237 days were conducted with the influent with $40{\sim}60Mn{\cdot}mg/L$. The pH range of effluent reached to 6.1~10.0, which is slightly lower than that of effluent without Fe. S reactor showed the highest range of pH with 7.1~9.9, followed by S+L and S+G reactor. However, the efficiency of Mn removal showed S+L>S>S+G with the range of 94~100%, 68~100% and 68~100%, respectively in spite of relatively low pH range. S+L reactor showed the most resistance on Fe input, which means other mechanisms such as $MnCO_3$ formation by the carbonate prouced from the limestone or autocatalysis reaction of Mn contributed to Mn removal rather than pH related mechanisms. The evidence of reactions between carbonates and Mn, rhodochrosite ($MnCO_3$), was found from the X-ray diffraction analysis of precipitates sample from S+L reactor. From this study, the most effective reactors on Mn removal in the presence of Fe was S+L reactor. The results are expected to be applied for the Mn containing mine water treatment in the presence of Fe within the relatively low range of pH.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.5
• /
• pp.174-180
• /
• 2023

Porcelain (white ware, celadon ware) coated with a ferrous sulfate and ferrous/cobalt sulfate was sintered at 1250℃. The specimens were investigated by HR-XRD, FE-SEM, HR-EDS, and UV-vis spectrophotometer. Through X-ray rietveld quantitative analysis, quartz and mullite were found to be the main phases for white ware, and mullite and plagioclase were found to be the main phases for celadon ware. When the pigment of ferrous/cobalt sulfate was applied, were identified as an andradite phase for celadon ware and a spinel phase for the white ware, and the amorphous phase, respectively. The L^* value, which was the brightness of the specimen, was 72.01, 60.92 for white ware and celadon ware, respectively. The ferrous and ferrous/cobalt pigment coated porcelain had L^* values of 44.89, 52.27 for white ware and celadon ware, respectively; with a^* values of 2.12, 1.40, an d at b^* values of 1.45 and 13.79. As for the color of the specimens, it was found that the L^* value was greatly affected by the white ware, and the b^* value differed greatly depending on the clay. It was thought to be closely related to the production of the secondary phase such as Fe₂O₃ and andradite phase produced in the surface layer.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.287-293
• /
• 2006

Diamond-like carbon (DLC) film was deposited using benzene $(C_6H_6)$ by r. f-plasma assisted chemical vapor deposition. The tribological properties of the DLC film were tested by rotating ball-on-disc type tribometer isolated by a chamber. The tribological test was performed in air environment of relative humidity ranging from 0 to 90% in order to observe the tribological behavior of the DLC film with the change of humidity. We used steel ball and DLC coated steel ball to investigate the effect of the counterface material. Using steel ball, the friction coefficient of DLC film increased from 0.025 to 0.2 as the humidity increased from 0% to 90%. In case of DLC coated steel ball which didn't form the Fe-rich debris, the friction coefficient showed much lower dependence of humidity as 0.08 in relative humidity 90%. We confirmed that the high humidity dependence of the friction coefficient using steel ball resulted from the increase of debris size with humidity and the formation of Fe-rich debris by the wear of steel ball. And the friction coefficient was immediately dropped when the relative humidity changed from 90% to 0% during test using steel ball. From this result, we confirmed that the effect of the Fe-rich debris on the friction coefficient was that Fe element in debris formed the highly sensitive graphitic transfer layer to humidity.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2002.11b
• /
• pp.76-76
• /
• 2002

무주나무(Lasianthus japonicus Miquel)는 일본, 대만, 중국 등에 분포하고 열대 및 아열대의 상록활엽수림에서만 자라는 것으로 알려져 있으며, 우리나라에는 제주도 남쪽계곡에만 분포하는 희귀식물이다. 무주나무는 현재 환경부 지정 보호야생식물로 보호되고 있으나 개체특성 및 자생지에 대한 정확한 조사가 이루어진 바 없다. 본 연구는 무주나무의 자생지 현황과 생육특성을 파악하고자 실시하였다. 무주나무의 자생지는 제주도 남제주군 남원읍 하례리 해발 250m의 계곡 동사면과 서귀포시 돈네코 계곡의 해발 350 m 계곡의 서사면 등 2개소로 확인되었다. 자생지별 개체수는 남원읍 하례리 4개체, 서귀포시 돈네코계곡 5개체 등 총 9개체에 불과하였다. 자생지는 계곡의 상록수림 하부에 바위 위 부엽토나, 습한 계곡 사면이었으며, 교목층에는 구실잣밤나무, 비쭈기나무, 황칠나무, 동백나무 등이 우점하고, 관목층에는 사스레피나무, 백량금, 산호수 등이 우점하는 상록활엽수림이었다. 분포 개체의 수고는 최소 0.4 m, 최대 1.55 m로 평균 1.5 m 였다. 생장특성을 조사한 결과 줄기는 어릴 때는 사각형이지만 점차 원형으로 되며, 일정한 마디가 있고 털이 없으며, 잎은 대생하고, 혁질이며, 중륵과 측맥이 뚜렷한 특성을 갖고 있었다. 열매는 장과형으로 성숙 시에는 남색이며 털이 없으며, 직경 약 6-7 mm, 4-5개의 종자가 들어 있었다. 종자는 반달형이며, 3개의 홈이 지는 특성을 갖고 있었다. 현재의 자생지는 자연적인 요인으로서 토양유실이 심하게 일어나고 있는 지역이었으며, 교목 또는 다른 관목에 의한 피압으로 무주나무의 생장에 부적절한 환경으로 판단되었다. 따라서 자생지의 적절한 식생관리와 지속적인 자생지 조사 및 자생지외 보존에 관한 연구가 이루어져야할 것으로 생각된다.$I_{NO}$ 가 죽절초를 제외한 3종에서 여름철 낮시간에 증가하였다. 겨울철의 O-J-I-P곡선은 모든 종에서 낮시간에 다소 낮아지지만 큰 변화는 없었다. 그리고, 문주란, 박달목서, 파초일엽에서 $\psi$o/(1-$\psi$o)가 낮시간에 다소 증가하였다. 이로부터 P $I_{NO}$ , SF $I_{NO}$ , $\psi$o/(1-$\psi$o)등의 변수는 식물의 활력도를 검정하는 지표로 활용될 가능성이 높다고 할 수 있다.irc}C$) 까지 동시에 냉각된 사실을 지시한다. 각섬석 편암내의 각섬석들은 복잡한 40Ar/39Ar 연대를 보여주며 일부가 평형연대를 보여주지만 특별한 의미 부여가 힘들다.해예방행동을 촉구하는 등의 효과도 높은 것으로 예방의학적인 유용성이 크다고 볼 수 있다. 미침을 알 수 있었다. 대두 단백질로 코팅된 golden delicious는 상온에서60일 동안 보관하였을 경우, 사과표피의 색도 변화를 현저히 지연시킴을 확인하였다. 또한 control과 비교하여 성공적으로 사과에 코팅하였으며, 상온에서 보관하여을 때 사과의 품질을 30일 이상 연장하는 효과를 관찰하였다. 이들 결과로부터 대두단백질 필름이 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elements)로 가정한다. 즉, [+wh] 의미의 겹의문사는 동일한 구성

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.346-346
• /
• 2007

압전세라믹 재료는 현재 압전 변압기, actuator, transducer, sensor, speaker 등에 광범위하게 이용이 되고 있다. 이 중에서 압전세라믹 소결체를 이용한 스피커의 제조는 가공이 까다롭고, 대형의 크기로 제작 시 소자가 깨지는 등의 많은 제약을 받고 있으며, 저음 특성이 떨어져 응용 범위가 한정되어 있다. 따라서 최근에는 이러한 단점을 극복하기 위하여 세라믹/고분자 복합체를 이용한 필름 스피커를 제작하고자 시도하고 있다. 이러한 세라믹/고분자 0-3형 압전 복합체를 이용할 경우, 제품의 경량화를 실현할 수 있고, 크기나 환경의 영향을 거의 받지 않으므로, 고기능성 스피커로의 응용에 적합할 것으로 보인다. 따라서 본 연구에서는 PZT계의 세라믹와 PVDF, PVDF-TrFE, Polyester, acrylic resin 등의 여러 고분자 물질과의 복합체를 제조하여 압전특성을 평가하였다. 본 실험은 먼저 $(Pb_{1-a-b}Ba_aCd_b)(Zr_xTi_{1-x})_{1-c-d}(Ni_{1/3}Nb_{2/3})_c(Zn_{1/3}Nb_{2/3})_dO_3$ (이하 PZT라 표기)의 최적화 조성을 선택하여, $1050^{\circ}C$에서 소결된 분말을 48시간 ball milling방법 로 약 $1{\mu}m$ 크기로 분쇄하였다. 고분자 물질들은 알맞은 용제들을 선택하여 녹였다. 그 다음 소결된 PZT분말과 고분자를 50:50, 60:40, 65:35, 70:30등의 무게 분율로 혼합하고, 분산제, 소포제 등을 첨가하여 3단 roll mill을 이용하여 충분히 분산시켜 페이스트 (Paste)를 제조하였다. 제조된 페이스트를 ITO가 코팅된 PET필름 위에 스크린 프린팅 법을 사용하여 인쇄하여 $120^{\circ}C$에서 5분간 건조하였다. 코팅된 복합체의 두께는 약 $80{\mu}m$ 정도로 측정되었다. Ag 페이스트를 이용한 상부 전극 형성에도 스크린 프린팅 법을 적용하였다. 이를 $120^{\circ}C$에서 4 kV/mm의 DC 전계로 분극 공정을 수행한 후 전기적 특성을 평가하였다. 유전특성을 조사하기 위해서 LCR meter (EDC-1620)를 사용하였고, 시편의 결정구조는 XRD (Rigaku; D/MAX-2500H)을 통해 분석하였으며, 전자현미경(SEM)을 이용하여 미세구조를 분석하였다. 압전 전하상수$(d_{33})$ 값은 APC 8000 모델을 이용하여 측정하였다. PZT의 혼합비가 증가할수록 비유전율 및 압전 전하 상수 등의 전기적 특성이 증가되었다. 또 여러 고분자 물질 중에서 PVDF-TrFE 수지가 가장 우수한 특성을 보였다. 이는 PVDF-TrFE 수지가 압전성을 나타내기 때문인 것으로 판단되었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.92-95
• /
• 2019

In this paper, a novel laser-based non-contact and non-destructive stress measurement technique is newly proposed for measuring stress in steel structural members. As the demand of stress monitoring in structural members is increased, various non-destructive techniques are being applied to the field of structural health monitoring. Spectroscopic techniques are non-contact technique and widely used for chemical identification of target materials. Especially, piezospectroscopic technique is a residual stress measurement technique in thermal barrier coatings. Although the piezospectroscopic technique has high possibility of measuring structural stress in steel members, the technique has been rarely applied to this field. In this paper, piezospectroscopy-based stress measurement technique is, therefore, proposed for measuring stress in steel structural member. To do that, alumina particles have been coated onto a specimen of a structural steel rod using a thermal spray coating technique. And then, an uniaxial compression test has been conducted to the specimen to collect each fluorescence spectrum under different loading conditions. Finally, the linear relation of spectral shift and applied compressive stress of the specimen has been experimentally established.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2021

Formulations which are dispersed in water are often used in color cosmetics because they are characterized by no powder flying, not sticky, and high adherence while giving a light feeling of use. However, little research has been considered on the effect of the pigment on the above formulations used in color cosmetics. In this study, experiments were conducted to measure and analyze the effect of pigments on the formulation of pigments, organic pigments, and pearl polish, which are mainly used in the manufacture of color cosmetics, on appearance changes, pH changes, and photometric stability. Carmine or ferric ferrocyanide coated titanium dioxide mica-based pigments were not suitable for use due to poor photostability, with colors appearing on the surface from low viscosity formulations. Organic pigments had a good photostability of 1% of the formulation which are dispersed in water, but were not suitable for use because they came out of color on the water surface and did not spread well due to the clumping of powders. The titanium dioxide mica system pigments coated with pearl polish, inorganic pigments, and iron oxide were suitable for use due to their excellent appearance and optical stability in the formulation. Furthermore, the pH of all samples distributed by each pigment seems to be within the range of 3.0 to 9.0, which is suitable for cosmetic applications. This is expected to help manufacture color cosmetics with a stable water dispersible formulations by selecting and using stable pigments in anticipation of the behavior of pigments in the formulations.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.55-64
• /
• 2009

For realizing ubiquitous computing, many research activities are geared towards various areas including embedded computing, RFID, USN, home networking, context-awareness, and etc. By using the ability of RFID technology to recognize a number of objects simultaneously, more convenient ubiquitous application services are effectively provided. In this case, RFID middleware playing a role as a bridge between RFID reader devices and application services is required as well. In this paper, we propose a method of handling a number of types of RFID reader devices in ALE middleware of EPCglobal. For this, the information of connection and data protocol for a reader device is stored in a database as ontology meta-data, and used to interpret the data read by a reader device. By adding ontology data into a database, even though an RFID device newly emerges, ALE middleware can not only handle the device, but also be effectively extended through reusing ontology data, without any changes in the middleware.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.61-66
• /
• 2020

In this study, the effect of characteristics of colloidal silica, which was used as an additive in the compression/coating catalyst process, on activities and thermal stabilities of the catalysts was investigated. The shape, size, specific surface area and porosity, and composition of four different types of colloidal silica materials were analyzed, and the NOx conversion of V₂O₅/TiO₂ catalyst prepared by these colloidal silica were studied. Properties of the catalysts prepared by colloidal silica depend on the nature of the colloidal silica used, in particular the alkaline substances such as Na in the silica were evaluated to be directly effect on the deNOx conversion of the catalyst. In addition, higher silica contents in the colloidal silica were found to improve the deNOx activity and thermal stability of the catalyst.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.113-118
• /
• 1999

Aluminum hydrates were synthesized using $AlCl_3$.$6H_2O$as starting material by precipitation method. The phases of obtained powder were amorphous, boehmite, bayerite, nordstrandite depending on the pH of solutions. Aluminum hydrates transformed to $\alpha-Al_2O_3$via $\gamma$- $Al_2O_3$,$\delta$- $Al_2O_3$,and $\theta$-$Al_2O_3$,and particle sizes were grown by increment of heating temperature. The TEX>$\gamma$- $Al_2O_3$ powder was coated on intermediate layer of ceramic membrane by the dip-coating method, and unsupported membrane was also prepared for comparison. The supported layer showed porous structure with small grains, but the unsupported layer revealed interconnected larger grains. Grain growth is dominant in the unsupported layer than in the supported one.