• Journal of the Korean Magnetics Society
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2016

The ac magnetic susceptibility was measured in iron-oxide nanoparticles with average size of 26 nm, which were uniformly dispersed in organic solvent. The ac magnetic susceptibility measured under zero magnetic fields was well fitted with Debye relaxation model and the relaxation frequency was 370 Hz. The relaxation frequency of the nanoparticles coincided with relaxation time of the Brownian motion, which is due to the viscosity of the liquid medium in which magnetic nanoparticles dwell. The Brown relaxation frequencies were linearly increased with magnetic field.

• Composites Research
• /
• v.30 no.3
• /
• pp.181-187
• /
• 2017

The effect of nanoscopic and microscopic Fe, $Fe_3O_4$, and Ni particles and their shapes and substrate materials on the heating behavior of thermoplastic polyurethane (TPU) adhesive films was investigated via induction heating. The heat generation tendency of $Fe_3O_4$ particles was higher than that shown by Fe and Ni particles in the TPU adhesive films. When the Fe and Ni particle size was larger than the penetration skin depth, the initial heating rate and maximum temperature increased with an increase in the particle size. This is attributed to the eddy current heat loss. The heating behavior of the TPU films with Ni particles of different shapes was examined, and different hysteresis heat losses were observed depending on the particle shape. Consequently, the flake-shaped Ni particles showed the most favorable heat generation because of the largest hysteresis loss. The substrate materials also affected the heating behavior of the TPU adhesive films in an induction heating system, and the thermal conductivity of the substrate materials was determined to be the main factor affecting the heating behavior.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.3
• /
• pp.65-71
• /
• 2018

There is no significant difference in the initial viscosity of a propellant applied with yellow iron oxide and red iron oxide. In addition, the thermal decomposition rate of the material with added yellow iron oxide is faster than that with the addition of red iron oxide. Specifically, it was confirmed that the pressure exponent was 18% lower at high temperature and high pressure with yellow iron oxide than with red iron oxide. The initial viscosity was lowest at 71% of the large particle to small particle ratio.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.498-503
• /
• 2017

There is no unusual difference in the initial viscosity of the propellant applied with yellow iron oxide and red iron oxide. In addition, the thermal decomposition rate of the material added with yellow iron oxide is faster than that of the addition of red iron oxide. Especially, it was confirmed that the pressure exponent was 18% lower at high temperature and high pressure. The initial viscosity was lowest at 71% of large particle/small particle ratio

• Composites Research
• /
• v.21 no.2
• /
• pp.31-35
• /
• 2008

In order to design light weight and high efficient electromagnetic wave absorbing materials, hollow magnetic particles have been introduced in this study. The electroless plating method has been utilized to coat Ni and Fe on the substrates of synthesized polystyrene particles of submicron size. Removing polystyrene particles by heat treatment resulted in hollow structures. Observation by SEM, TEM and EDS confirmed the surface morphology and coating thickness of Ni and Fe. Polymeric composites containing hollow particles were tested in order to compare the electromagnetic properties between Ni coated and Fe costed particles. The composite of 30 wt% Fe hollow particles showed the higher complex permeability than Ni hollow particles or the conventional barium ferrite particles.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.95-108
• /
• 2015

Nano-sized iron colloids are formed as acid mine drainage is exposed to surface environments and is introduced into surrounding water bodies. These iron nanomaterials invoke aesthetic contamination as well as adverse effects on aqueous ecosystems. In order to control them, the characteristics of their behaviour should be understood first, but the cumulative research outputs up to now are much less than the expected. Using zero-valent iron (ZVI) and magnetite, this study aims to investigate the behaviour of iron nanomaterials according to the change in the composition and pH of background electrolyte and the concentration of natural organic matter (NOM). The size and surface zeta potential of iron nanomaterials were measured using dynamic light scattering. Characteristic behaviour, such as aggregation and dispersion was compared each other based on the DLVO (Derjaguin, Landau, Verwey, and Overbeek) theory. Whereas iron nanomaterials showed a strong tendency of aggregation at the pH near point of zero charge (PZC) due to electrostatic attraction between particles, their dispersions became dominant at the pH which was higher or lower than PZC. In addition, the behaviour of iron nanomaterials was likely to be more significantly influenced by cations than anions in the electrolyte solutions. Particularly, it was observed that divalent cation influenced more effectively than monovalent cation in electrostatic attraction and repulsion between particles. It was also confirmed that the NOM enhanced the dispersion nanomaterials with increasing the negative charge of nanomaterials by coating on their surface. Under identical conditions, ZVI aggregated more easily than magnetite, and which would be attributed to the lower stability and larger reactivity of ZVI.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.355-355
• /
• 2011

이론적으로 단일벽 탄소나노튜브(SWNT)는 무산란 전도가 가능하여 실리콘을 대체할 차세대 나노소자의 기본소재로서 많은 각광을 받아왔다. 이러한 SWNT의 전기전자적 특성을 좌우하는 주요인자로는 직경과 비틀림도(chirality)가 있으며, 이를 제어하기 위한 많은 방법들이 제시되어왔다. 특히, SWNT 합성 시 필요한 촉매 나노입자의 크기와 튜브직경과의 연관성이 제기된 후부터, 합성단계에서 촉매 나노입자의 형태(또는 크기)를 제어함으로써 SWNT의 직경을 제어하고자 하는 직접적인 방법들도 주요방법의 한 축으로 이어지고 있다. 한편, SWNT의 합성촉매로는 철, 코발트, 니켈 등의 전이금속이 주로 사용되어 왔으나, 최근에는 금, 은, 루테늄, 팔라듐, 백금 등의 귀금속에서부터 다양한 금속산화물 나노입자에 이르기까지 그 범위가 확장되었다. 본 연구에서는, 촉매 나노입자의 크기제어를 통하여 SWNT의 직경을 제어할 목적으로, 전이금속에 비해 상대적으로 융점이 낮아 비교적 낮은 온도의 열처리를 통해서도 입자의 크기를 제어할 수 있는 금 나노입자를 선정하여 SWNT의 합성거동을 살펴보았다. 합성은 메탄을 원료가스로 하는 CVD방법을 이용하였고, 합성되는 SWNT의 다발화(bundling) 등을 방지하기 위하여 수평배향 성장을 도모하였으며, 이를 위하여 퀄츠 웨이퍼를 사용하였다. 우선, 콜로이드상인 금 나노입자의 스핀코팅 조건을 최적화하여 퀄츠 위에 단분산(monodispersion) 된 금 나노입자를 얻었으며, 열처리 온도 및 시간의 제어를 통하여, 1~5 nm 범위 내에서 특정 직경을 갖는 금 나노입자를 얻는 것이 가능하게 되었다. 합성 후 금 나노입자의 크기와 합성된 SWNT 직경과의 관계를 면밀히 조사한 결과, 튜브보다 나노입자의 크기가 약간 큰 것을 확인할 수 있었으며, 금 나노입자의 크기에 따라 SWNT의 합성효율이 크게 좌우되는 것을 확인하였다.

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.35-35
• /
• 2003

목적： 나노 산화철 입자 및 생고분자인 PCL(Polycarprolacton)로 표면 코팅한 T2 MR 조영제를 합성하고 동물 종양 모델을 이용하여 In vivo 특성을 조사하고자 하였다. 대상 및 방법： $FeC1_2$.$4H_2$O와 $FeC1_3$.$6H_2$O을 무게비를 1：2로 정량하여 첨가하고 NaOH 혹은 TMAOH로 pH를 조절한후 PCL를 첨가하여 magnetite가 생성되는 동시에 고분자로서 코팅을 한후 증류수로 여러번 씻어준다. TEM, SEM, DLS 및 IR spectroscopy와 SQUID등을 측정하여 최종 반응물의 입자크기, 자성, 코팅 상태등을 평가하였다. 최소의 입자크기를 형성하는데 필요한 실험 조건을 찾기 위해 반응온도, 코팅할 고분자의 함량, 교반속도별로 실험하여서 최적의 조건을 찾으려 하였다. 토끼의 간에 VX2 암종을 이식한 동물 모델을 이용하여 PCL로 표면 코팅된 나노자성체의 in vivo 영상 특성을 알아보았다.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.168-173
• /
• 2012

Polystyrene-polyimide core-shell microsphere was prepared by dispersion polymerization using poly(amic acid) as the stabilizer. Iron oxide was formed at the microsphere by thermal decomposition of iron pentacarbonyl impregnated in the microsphere. The magnetic polystyrene-polyimide microsphere was monodisperse and the size was about 500 nm. The magnetic polystyrene-polyimide microsphere had 40% of iron oxide, which was identified as $Fe_3O_4$ by X-ray diffraction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.577-577
• /
• 2012

자성나노유체(ferrofluid)는 계면활성제로 코팅된 직경 10 nm인 자성나노입자(magnetic nanoparticle)가 바탕액체(물 또는 오일 등)에 분산하고 있는 액체이다. 최근 연구에 의하면 자성나노 유체가 변압기 절연유로 사용될 경우 열전달 및 절연 특성이 향상된다고 보고되고 있다. 또한 자성나노유체에 포함된 자성나노입자는 영구자석 및 전자석 등에 의한 외부 자기장뿐만 아니라, 두 전극 사이에 인가된 전기장에 의한 유도자기장에 영향을 받는다고 한다. 본 연구에서는 두 전극 사이 전압을 1 kV로 인가한 경우에서 광학현미경을 이용한 자성나노입자의 마이크로 채널(microchannel) 내부 이동특성 관측 및 Maxwell 방정식을 이용한 전자기장 수치해석을 수행하였다. 실험 및 해석 결과를 통하여 자성나노유체에 포함된 자성나노입자가 인가된 전기장에 의하여 발생되는 이동특성을 분석하고, 선행연구에서 보고된 절연특성 변화에 관한 상관관계에 대해 고찰하였다. 광학현미경 관측 결과로부터 전기장이 인가되지 않은 경우에 균일하게 분산되어 있는 자성나노입자는 전기장 인가에 따라 발생되는 유도자기장에 의하여 입자 간의 뭉침(agglomeration) 현상과 전극 주위로 이동하려는 성질을 확인하였다. 또한 수치해석 결과로부터 자성나노입자의 존재로 인하여 전극 사이의 전기장 강도와 자속밀도가 증가함을 확인하였으며, 자성나노입자의 이동을 유발하는 유도자기장이 전극 주위에서 큰 것을 파악할 수 있었다. 이와 같은 결과는 자성나노입자가 변압기 절연유에 첨가된 경우우 절연파괴전압이 변화되는 이유를 설명할 수 있는 근거가 된다.