• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.596-602
• /
• 2003

A Polymeric emulsifier was synthesized by solution polymerization with 2-ethylhexyl acrylate, n-butyl acrylate, and acrylic acid. A series of polymeric emulsifier have been used in the emulsion copolymerization of 2-ethylhexyl actryacrylate and n-butyl acrylate. The size of the synthesized latex particles was around 145 nm and its distribution was very narrow. Emulsion with polymeric emusifier showed no coagulum after 7 cycles of freeze-thaw test, while the emulsion with traditional emulsifier exhibited coagulum after 2 cycles. The adhesion tests showed that the initial tackiness and peel strength decreased as the molecular weight and acrylic acid content of polymeric emulsifier increased, whereas the holding power increased.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.53-58
• /
• 2013

Recently, some fluid-structure interaction (FSI) problems involving the fluid impact loads interacting with structures, such as sloshing, slamming, green-water, etc., have been considered, especially in the ocean engineering field. The governing equations for both an elastic solid model and flow model were originally derived from similar continuum mechanics principles. In this study, an elastic model based on a particle method, the MPS method, was developed for simulating the FSI problems. The developed model was first applied to a simple cantilever deflection problem for verification. Then, the model was coupled with the fluid flow model, the PNU (Pusan National University modified)-MPS method, and applied to the numerical investigation of the coupling effects between a cantilever and a mass of water, which has variable density, free-falling to the end of the cantilever.

• Particle and aerosol research
• /
• v.10 no.4
• /
• pp.163-167
• /
• 2014

Particle number portable emission measurement system (PN-PEMS) is an instrument for measuring number concentration of automobile exhaust. The principle of some pre-existing commercial PN-PEMS is to charge particles and display the number of particles by measuring current. However, this method has some problems for measuring exhaust. In this study, to solve these issues, we have developed a single particle counting PN-PEMS based condensation particle counter (CPC). The PN-PEMS based CPC does not affect driving conditions and it is convenient for mobile because the instrument is small and light in structure. We evaluated counting efficiency of PN-PEMS based CPC by using electrostatic method (electrometer and Faraday cup).

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.11-17
• /
• 2008

The net shape effects by the various vectors in underwater. Each particle of the net calculating the effect of all vectors augments an accuracy and reality. But, the time complexity becomes larger because of huge calculation. The previous techniques reduced a physics reality. And embodied the underwater virtual reality which augments visual reality with simulation. In this paper, parallel processing the particles, it embodied the simulation which is satisfied a physical reality and time reality. The parallel processing used the OpenMP, and the reality graphic expression used the OpenGL. The simulation which this paper Proposes will be the possibility becoming the fundamental data for a model analysis or a specialist system from game and marine field.

• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1055-1060
• /
• 1998

The effects of particle size distribution have been investigated on the high frequency low loss Mn-Zn fer-rites. The particle size distribution was controlled by milling time. Zirconia ball and engineering plastic jar were employed to avoid iron contamination from the milling media. As increasing the milling time BET value was increased from 0.55 to 3.21m2/g and mean particle size was decreased from 2.1 $\mu\textrm{m}$ to 1.0$\mu\textrm{m}$ The large specific surface area of initial powder resulted in the high density of sintered core. However starting powders with high BET lead to inhomogeneous grain growth as well as poor electromagnetic pro-perties at sintering temperature above 1300$^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.653-658
• /
• 1998

ZrO2, B2O3 및 AI을 사용하여 SHS법에 의한 붕화지르코늄을 합성을 하고 산화철과 알루미늄 분말의 첨가가 합성물의 치밀화에 미치는 영향에 대하여 검토하였다. 합성물중에 존재하는 결정상은 대부분이 ZrB2와 $\alpha$-AI2O3상이었다. 산화붕소와 알루미늄의 몰비가 1.0:3.3이상일 때 합성물의 치밀화는 크게 증가하였고, ZrB2 입자도$\alpha$-AI2O3용융상과 더불어 조대하였다. 산화철 1목에 대하여 알루미늄을 1-3몰을 첨가한 것과 산화철 1.5몰에 대하여 알루미늄을 3몰 첨가시 $\alpha$-AI2O3를 중심으로하는 슬라그상으로부터 용융상의 분이가 가능하였고, 이들 용융상에 존재하는 결정상은 ZrB2이외에 Fe, Fe2B, Zr2Fe상이었다. 용융상의 상대밀도는 산화철 1몰에 대하여 알루미늄을 1몰 첨가시 83.2%인 반면에 그 이상의 첨가량에 대해서는 치밀화는 크게 증가하여 알루미늄을 3몰 첨가한 경우 상대밀도는 93.7%로서 최대를 나타내었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.269-273
• /
• 2011

본 연구는 도암댐 상류 고랭지 농업지역의 이른 봄철 융설에 의해 발생되는 비점오염 물질의 배출 특성을 규명하고자 수행하였다. 연구는 2010년 2월 중순부터 4월 말까지 수행하였다. 연구지역에서는 2009년 11월 2일부터 2010년 4월 29일까지 눈이 내렸으며, 일 최대 적설량은 2월 11일에 기록된 59.3 cm이고, 총 적설량은 372.1 cm로 나타났다. 연구결과 융설에 의해 발생되는 단위 면적당 유량은 $77.05\;m^3$/ha/day로서 겨울철 평시 유량 $26.99\;m^3$/ha/day에 비해 두배 가까이 증가하였다. 유량의 변화는 기온의 영향을 많이 받는 것으로 나타났으며, 유량의 변화는 탁도와 SS 그리고 $COD_{Mn}$의 농도 변화에 영향을 주는 것으로 조사되었다. 오염물질 항목 중 SS와 COD의 유량가중평균농도는 각각 986.0 mg/L와 16.3 mg/L로서 겨울철 평시 농도보다 크게 증가하였는데, 이는 융설시 발생한 유출수에 의해 미세한 토양입자의 유실과 함께 오염물질도 배출된 결과로 판단된다. 그러나 T-N과 T-P의 농도는 큰 변화가 없는 것으로 조사되었다. 본 연구결과에 기초할 때, 담수호 상류에 위치한 고랭지 지역에서는 겨울철 적설량이 많고 융설에 의한 수질오염 문제가 하는 것으로 판단된다. 따라서 해빙기 융설로 인해 발생되는 비점오염 물질의 정량화에 대한 연구가 체계적이고 지속적으로 수행될 필요가 있다. 특히 우리나라의 겨울철 적설량과 기온은 연도별로 많은 편차가 있고, 연구결과 다량의 오염물질이 배출되기 때문에 융설에 대한 연구는 반드시 수행되어야 할 것으로 판단된다.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.9-17
• /
• 1999

The study investrgated the properti es of lh$\xi$ dust~ from felToalloy manufacture, The chemical composition, composItron material, particle size and shapes of the bulk dust, sized dust and magnetically separated dust were llivestigated. As the result, we s suppose that the dust from HLgh Carbon Fenomauganesc Manufacturing Process is not sufficient as soource material of Mn because of the low Mn conteut (13.5%) aud complicated composition material The dust from Bag Filter of AOD Process is m mainly made up of $0.2~2\mu\textrm{m}$ $Mn_3O_4$ (Hausmatmite) particle in spherical shape and the Mn content is 63.1%. The dust from Cooler of AOD Process is mainly made up of coarse $Ca(OH)_2$ Mn, $Fe_yO_2$ $SiO_2$ and fine $Mn_3O_1$.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.57-65
• /
• 2008

are nanometer or micrometer scale vesicles that can be used as drug delivery carriers. However, plain liposomes are plagued by rapid opsonization, making their circulation time in bloodstream be shortened. In this study, model protein, bovine serum albumin (BSA)-coated liposomes were prepared by coating cationic liposomes with BSA molecules at higher pH than isoelectric point of BSA. The BSA molecules coated on the liposomal surface were denatured by thermal treatment at above 60oC. While both plain and cationic liposomes had about mean particle diameter of 1041 nm, BSA-coated cationic liposomes (BCL) had mean particle diameter of 1091 nm. Encapsulation of model drug, doxorubicin (DOX), in liposomes were carried out by using remote loading method and the loading efficiency of DOX to liposomes was about 90%. The mean particle diameter of BCL did not increase in blood plasma and adsorption of plasma protein was much less than plain or cationic liposomes. These results suggest that BCL can be used as a long-circulating liposomes in bloodstream.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.1
• /
• pp.15-23
• /
• 2008

This study is on encapsulation of a new whitening agent, LA-PEG using solid lipid nanoparticle(SLN) method, one of nanoparticle preparation method. Classical method has high capsulation efficiency for hydrophobic compounds but has demerit of low capsulation efficiency($2{\sim}3%$) for hydrophilic compounds. Purpose of this study is preparation of SLN that has higher skin penetration effect compared with general liposome, and also has higher encapsulation efficiency of hydrophilic compounds. For SLN preparation, coconut oil, macadamia oil, and jojoba oil were used. As a result, SLN preparation using coconut oil(include LA-PEG) has the most high encapsulation efficiency and also has the smallest average particle size(270 nm). SLN prepared with macadamia oil and 1% of Tween 60 has the largest particle size. Base made with coconut oil and 2% of Tween 60 showed the fastest release and base made with macadamia oil and 2% of Tween 20 showed the latest release.