• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.632-637
• /
• 2018

AC 및 DC 전력공급구간에서 모두 주행이 가능한 AC/DC 철도차량은 추진제어장치 내부에 컨버터 및 인버터가 모두 구성되어 있다. 따라서 DC 철도차량에 비해서 구성이 복잡하며 각 전력공급 환경에 적합한 인버터 제어 방법이 요구된다. 본 논문에서는 각 전력공급구간에서 고려되어야 할 사항과 이에 대한 인버터 제어 방법에 대하여 기술하고 서울 1호선 및 4호선 철도차량에 적용한 결과를 분석하였다.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1479-1485
• /
• 2008

This paper shows the result of study on the detailed applicable procedure of software Escrow account applied for rolling stock. The customer as end-user requires software source code, related critical technical documents etc. about software based system of train for maintenance purpose through software modification and enhancement after completion of warranty period. Otherwise, it is not easy to keep up with the customer's requirement of demanding supplier's exclusive information because it is considered as intellectual property rights of supplier as software developer. Therefore, the main contractor(normally called as Car-builder) need to introduce software Escrow service in order to coordinate the different a standpoint between software developer and end-user. Software Escrow is a legal arrangement in which an software Escrow packages (software source code, software development tool, build process, proprietary information, copyright and etc.) is deposited into and Escrow account under the trust of a reliable third party (Escrow agent) depending on mutual agreement on Escrow contract condition as signing off Escrow agreement document. This paper deals with the study on the detailed procedure about the following general category of Escrow procedure and purpose to apply this specific procedure of Escrow into the future project onward.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.127-132
• /
• 2022

Among the electrical components mounted on railroad cars, the largest load is the main transformer, which has a low power density of 0.2~0.4 MVA/ton due to the low operating frequency(60Hz), which is an important factor for weight reduction. Therefore, research on molded transformers, semiconductor transformers, etc. is being actively conducted at Domestic and foreign in order to improve the main transformer for railway vehicles. Meanwhile, attempts are being made to apply a permanent magnet synchronous motor (PMSM) to replace an induction motor as a traction motor that is mostly applied to domestic and foreign railway vehicles. Permanent magnet synchronous motors (PMSMs) can secure higher power density and efficiency compared to induction motors, but have disadvantages in that the materials required for manufacturing are expensive and design is somewhat difficult compared to induction motors. Considering these problems, in this paper, we suggest that a small and lightweight semiconductor transformer is applied, and a simple structure, high torque, low cost SRM can be applied in accordance with the requirements such as weight reduction and high efficiency of railroad vehicles. content.

• Journal of the Korean Society for Railway
• /
• v.14 no.6
• /
• pp.477-483
• /
• 2011

In this paper, noise source localization of the Korean high speed train was conducted by using delay and sum beam-forming method of a microphone array. At first, the microphone array having irregular configuration was designed and the resolution of which was analyzed from parameters such as 3-dB bandwidth and maximum side-lobe level. After the demonstration, the microphone array was applied on the high speed train and noise localization of the high speed train driving at 300 km/h was performed successfully.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.516-521
• /
• 2016

In this study, we investigated the operation of railroad fire fighting vehicles against fires on trains in a long railway tunnel. In recent years, long railway tunnels (more than 10 km in length) have been built and the number of such tunnels, such as the Geumjeong tunnel (20.3 km in length) on the Gyeongbu high speed line, Solan tunnel (16.7 km in length) on the Yeongdong line and Yulhyeon tunnel (50.3 km in length) on the Suseo high speed line which is scheduled to be opened in the second half of 2016, is increasing. Significant damage is to be expected, due to the increased evacuation time and limited accessibility of fire services when the train is stopped by an urgent fire in the tunnel. Special fire fighting vehicles capable of running on rails have been developed and operated in overseas advanced countries. Therefore, a fire-response system using Unimog vehicles, which can run on road and rail, instead of road vehicles, is necessary. The characteristics of the railway tunnel and thermal environmental change caused by a train fire in a tunnel were analyzed in this study. Also, the operational requirements of the railroad fire fighting vehicles were evaluated by taking into account the specifications of the railroad fire fighting vehicles under development.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.48-49
• /
• 2005

한국형 고속철도시스템은 최고운행속도 350km/h로 주행하는 고속열차(시제열차 7량 편성)의 개발에 성공하여 현재 시운전 시험을 통해 신뢰성과 안정성을 검증하고 있다. 국내 기술로 새롭게 개발된 한국형 고속철도 시스템은 고속운행에 따른 엄격한 안전요구사항을 만족해야 하며, 특히 고속-대량의 수송수단으로서 승객의 안전을 최우선으로 하기 때문에 다른 어떠한 시스템보다 엄격한 안전확인 및 성능검증을 위한 철저한 시험평가 과정이 필요하다. 본 연구에서는 한국형 고속철도 시스템 개발에 적용한 안전설계 요건의 분석내용을 제시하고, 고속철도 차량시스템의 안전성능 요건을 입증하기 위한 성능시험 체계로서 구성품 시험, 완성차시험(단차 및 편성 시험) 및 시운전 시험으로 구분한 한국형 고속철도 차량시스템에 대한 성능시험기준안을 소개하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.41-46
• /
• 2018

Recently, the importance of the northeast economies including Russia has been growing, and according to the Eurasian initiative policy, the enhancement of transportation, logistics and connectivity between the northeast Asian countries is emerging as one of the challenges for future growth. However, due to the different vehicle systems used in each country, the railway connections between countries are not operating smoothly. Especially, the couplers of the railway cars which pass through the countries of northeast Asia including Russia have different regulations, which render their shape and characteristics incompatible. In this study, we propose a method of interconnecting the AAR type coupler used in Korea and China and the CA-3 type coupler compatible with the Russian GOST standard, and verify that its structural safety conforms with each set of regulations. We analyze the possibilities offered by this method of interconnection by performing tests while developing materials satisfying the mechanical properties required for the freight coupler.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2016

The type approval system of the railway safety law, which was enforced in 2014, has been preferentially applied to the field of railway vehicles. The type approval system addresses railway vehicles and railway constituents. Unlike the previous system, it requires serial verification stages divided, in consecutive order, into verification of design compatibility and conformity and type test. These stages are in accord with international certification systems including TSI certification of the European commission. This study has been carried out to find and meet the design requirements for a coupler head, which is a part of the automatic coupler system; requirements were drawn from TSI and technical specifications that are subordinate to the domestic railway approval system. Through this study, it has been found that there exist 34 design requirements to acquire a complete coupler head. Among those requirements, 32 were verified by document inspection and two were able to be verified by performing FEA and gathering range analysis data.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.498-508
• /
• 2008

TECA(Terminal Cabin) has train information, fault display, maintenance function and training function for driver, as sub-device of Seoul-Pusan Express train's on-board computerized device. Concerning KTX train's driving, signal driving is required for high speed driving, and it is true that we have difficulty in troubleshooting and acquisition of basic information through long train and one-man driving. Therefore, rapid and correct processing about various information and TECA device for maintenance are indispensable for its utilization. But there is not study example in hardware, maintenance about this device and device development according to new requirements. Therefore, this study will help understanding of driver assistance terminal device's maintenance performance development, describing TECA's basic functions necessary for device development and its requirements. Accordingly, I suppose that this thesis will be utilized to complete specification, necessary for new driver assistance terminal device development.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.481-484
• /
• 2011

최근 철도는 미래의 핵심교통수단이자 저탄소 녹색성장을 대표하는 교통수단으로 주목받고 있다. 그 중 자기부상열차는 바퀴 마찰에 따른 소음 진동 분진이 없는 차세대 교통수단이며, 이를 지지하는 구조물(교량)은 열차의 운행 안정성(동적거동)을 고려한 설계가 필요하다. 또한, 상부 구조물은 자기부상열차의 연행이동등분포하중을 지지하며, 이러한 하중조건을 갖는 차량이 운행할 때 상부 구조물은 설계기준사항들을 만족해야한다. 도시형 자기부상철도 토목구조물 설계기준에 의하면 도시형 자기부상철도의 운행 안정성(동적거동)을 평가하기 위한 항목들로 대상 구조물의 고유진동수, 승차감을 고려한 연직처짐 등이 요구된다. 따라서, 본 연구에서는 자기부상열차의 실 열차하중을 고려하여 연행이동등분포하중으로 철도교량의 동적거동을 검토하였으며, 설계기준을 적용하여 대상 철도 교량의 운행 안정성을 평가하였다.