• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.24-33
• /
• 2017

Domestic urban railway underground station structures, which were built in the 1970s ad 1980s, had been constructed as Cut-and-Cover construction system without seismic design. Because the trends of earthquake occurrence is constantly increasing all over the world as well as the Korean Peninsula, massive human casualties and severe properties and structures damage might be occurred in an non-retrofitted underground station during an earthquake above a certain scale. Therefore, to evaluate the retrofit effect and soil-structure interaction of seismic retrofitted underground station, a centrifugal shaking table test with enhanced stiffness on its structural main member are carried out on 1/60 scaled model using the Kobe and Northridge earthquakes. The seismic retrofitted members, which are columns, side walls, and slabs, are evaluated to comparing with existing non-retrofitted centrifuge test results Also, to simulate the scaled ground using variation of shear velocity according to site conditions such as ground depth and density, resonant column test is performed. From the test results, the relative displacement behavior between ground and structures shows comparatively similar in ground, but is increased on ground surface. The seismic retrofit effects were measured using relative displacements and moment behavior of column and side walls rather than slabs. Additionally, earthquake wave can be used to main design factor due to large structural deformation on Kobe earthquake wave than Norhridge earthquake wave.

• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.59-69
• /
• 2014

Recently, the building of an intermodal transportation system has become the most important policy in the establishment of a national-wide sustainable transport system. In the case of rail and public transport, an intermodal connecting improvement policy is essential due to the lack of trip completeness. In particular, high-speed rail has brought dramatic changes to the transportation system in Korea and the idea of high-speed rail stations as major transportation nodes to be linked to various travel modes needs to be analyzed in terms of an intermodal network. Thus, this study proposes a new connectivity analysis method to objectively and quantitatively evaluate intermodal connecting performance for high-speed rail in terms of an intermodal network around high-speed rail stations. Seoul, Busan, Ulsan, and Sin-gyeongju stations were designated for a range of spatial analyses; detailed connecting performance indexes of travel modes connecting high-speed rail stations, and the influence sphere of these stations are analyzed, except for internal transfer facilities. Finally, this study proposes a connectivity analysis method that applies the structural equation model and develops a connectivity index.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.374-374
• /
• 2011

Recently the construction of railway sections passing the central area of cities and stations under railway lines are increasing, and then it is urgently required to take the countermeasures against the railway vibration and the second-phase noise radiated from it. The most efficient countermeasure, out of technologies developed up to now, is the floating slab track which is the track system isolated from the sub-structure by springs. In other countries, the source technologies for anti-vibration design and vibration isolator - one of key components - have been developed and many installation experiences have been accumulated. However, in Korea, since the system design technology and technologies for key components are not yet developed, the foreign system are being introduced without any adjustment, and the key component, vibration isolator, depends on imports. In this study, based on the results of previous studies of the dust-control device installation using the slab and go through time after lifting impressive when stepped on power generated by the cross-section of the slab and shear connection re-examined the structural stability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3889-3894
• /
• 2012

The platform of railroad station for domestic passenger train has been operated at two categories like the platforms if low level(500mm, mainline) and high level(1,135mm, metropolitan subway line). To operate both metropolitan subway line and mainline railroad safely, it is essential to develop the doorstep equipment of railway vehicle regardless of low and high level platforms. On the other hand, the domestic test standard at durability and reliability of doorstep equipment has not been existed until now. This study aims at the development on doorstep equipment of telescopic sliding type for low and high level platforms. Durability analysis with VPD(Virtual Product Development) techniques are performed and the durability standard & qualification life through the rig test during no failure test time is examined in accordance with reliability qualification test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2019

In the case of urban railway facilities, the power supply should be maintained for the safe movement of passengers in communication facilities, disaster prevention facilities and boarding area security because of the confusion when power supply is cut off due to the nature of public transportation. In addition, considering that the number of trains is running on the urban railway line, it is necessary to operate at least 30 minutes for the bus stop and at least 1 hour for the communication and disaster prevention facilities. Therefore, it is essential to supply emergency power source to maintain stable operation of induction lamp and smoke exhaust system because main power is cut off in order to prevent further spread due to fire in case of the history of urban railway section or vehicle fires. Recently, UPS(Uninterruptible Power Supply) function to prevent power outage in emergency, emergency power generation combined with ESS function which saves electricity at nighttime price time, A hybrid power storage system with a UPS function.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.15-28
• /
• 2023

Boundary Station is an evaluation index that was not reflected in the Seoul Metropolitan Urban Railroad Connected Eare Allocation. Boundary station is a station located at the boundary point of two transportation agencies sharing the same route, and track operation methods are divided into business management and maintenance management. Until now, the Connected Fare Allocation has evaluated the boundary stations from the perspective of business management. Meanwhile, the integrated public transportation fee system requires the need to interpret the boundary stations from the point of view of maintenance management at the developmental level. This study was prepared a measure to quantitatively analyze changes in income with the introduction of maintenance methods in mind. The Change in the income of operation agency evaluated based on the daily transportation card data for the boundary stations of the four Seoul Transportation Corporation and KORAIL sections. This study is meaningful as a basic research for an analytical judgment that evaluates and allocates changes in transportation income of Seoul Metropolitan Urban Railroad in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.597-604
• /
• 2009

The mass transit networks in Korea, such as buses, metro and subway, are co-related and the number of transfer points, in which a lot of pedestrian movement is generated, are rising. The functions of the transfer centers, in which several travel modes cross at a point, have to include convenience and comfort for pedestrians using the transfer centers, and such functions can make transit a more attractive travel option and thus eventually contribute to increases in ridership. However, the guidelines for station layouts and their assessments in transfer stations are not suggested so far. So the pedestrian pattern data (pedestrian walking distances and times, pedestrian approaching distances and times, pedestrian walking paths in the inside of stations) was collected and analyzed. Based on the results of the analysis, the ways to measure the quality of comfort for those who using transfer facilities were suggested using the times that pedestrians consume to transfer from a travel mode to another. The walking time of pedestrians at the inside of stations was also measured by pre-selected pedestrian pathways as the guidelines for station layout assessment in transfer facilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.36-46
• /
• 2016

Separate transportation card readers that record the amount of transfer volume occurring during movement in-between lines within the metropolitan railway transfer stations do not exist. This research proposes a model to estimate passenger transit movements in transfer stations that adequately reproduces characteristics arising during a transfer trip. The model used in this study assumes that passengers adopt transfer behaviors that minimize their generalized costs during transfer trips. Further, two measures are sought in order to reflect attributes of the metropolitan railway. The first is that similar paths connect origin and destination stations. For this, the M-Similar Paths method is applied to the model to identify the similar paths that arise. The second is that passengers perceive increasing number of transfers as additional transfer costs, which is reflected by means of the Stepwise Transfer Coefficient. Two case studies of metropolitan railway are used to propose measures for analysis of transfer trips. Twenty directional transit phenomena are reproduced for Sindorim railway station. Aggregate directional transit(A), aggregate inter-line transit(B), and B/A are calculated on a percentage basis for 33 metropolitan railway transfer stations, and using this, the functional role of transfers is explored.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.1-12
• /
• 2017

The Seoul metropolitan transportation card's high value lies in its recording of total population movements of the public transit system. In case of recorded information on transit by bus, even though route information utilized by each passenger is accurate, the lack of passenger transfer information of the urban railway makes it difficult to estimate correct routes taken by each passenger. Therefore, pinpointing passenger path selection patterns arising in the metropolitan railway network and using this as part of a path movement estimation model is essential. This research seeks to determine that features of passenger movement routes in the urban railway system is comprised of M-similar routes with increasing number of transfer reflected as additional costs. In order to construct the path finding conditions, an M-similar route searching method is proposed, embedded with non additive path cost which appears through inclusion of the stepwise transportation parameter. As well, sensitivity of the M-similar route method based on transportation card records is evaluated and a stochastic trip assignment model using M-similar path finding is constructed. From these, link trip and transfer trip results between lines of the Seoul metropolitan railway are presented.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.310
• /
• pp.62-66
• /
• 2002

오늘날의 빌딩이나 역사(驛舍)는 쾌적함을 위해 조명설비, 공조설비, 위생설비, 엘리베이터, 에스컬레이터, 방범방재설비, 통신정보설비 등이 잘 정비되어 있으며, 그 기기 모두는 전기로 작동되고 있다. 빌딩이나 교통전원설비의 리뉴얼공사를 하는 데는 어떻게 빌딩과 교통설비의 기능을 정지하지 않고 단기간에 완성하는가가 중요 포인트가 된다. 미쓰비시(삼릉)전기 플랜트건설총괄부에서는 고객니즈에 대한 검토뿐만 아니라 주변지역에 주는 영향도 충분히 조사하여 빌딩이나 철도 역사에 출입하는 사람들의 안전과 일상생활을 배려한 계획을 세워, 그 시공장소에 적합한 공법 개선과 최적의 기자재 공법을 개발하고 추진하여 안전$\cdot$품질을 충분히 고려한 현지시공을 실시하고 있다. (1) 반입공법 빌딩과 교통시설의 전원설비는 고층이나 지하에 설치되는 일이 많고 건물의 성질상, 전용 반입설비가 확보되어 있지 않는 것이 통상적이다. 동사에서는 고소반입용기기 ''뉴톤밸런스''((1))와 계단용반입기기 ''계단승강기''((2))를 개발하여 단(短)공기로 지역주민이나 빌딩 이용자에게 지장을 주지 않는 공법을 채용하여 높은 평가를 받고 있다. (2) 설치$\cdot$조립공법 건물 내의 작업은 환경을 악화시키지 않는 것이 중요하다. 저소음으로 배기가스를 발생시키지 않도록 ''전동크레인''((3))과 ''돔보(잠자리)크레인''((4))을 채용하고 있다. 또 소음$\cdot$진동을 발생시키지 않는 콘크리트용의 앵커구멍 뚫기장치 ''라구라구(樂樂)드릴''((5))과 앵커타설장치 ''라구라구(樂樂)햄머''((6)) 그리고 앵커강도확인장치 ''라구라구(樂樂)체커''((7)) 등의 기기를 개발하여 작업환경을 향상시켰다. $\divideontimes$ 위의 (1)$\~$(7)과 다음 페이지의 그림 중 (1)$\~$(7)은 대응하고 있다.